[Sun Oct 23 10:36:53 2011] Detection parameters:
  Position = (1152.2, 635.1) = 5 22 58.43 33 25 53.3
  Extent = 0.5" x 0.5", rotation angle = 162 degrees
  Source counts = 15.7 +/- 4.2
  Background counts = 2.3
  Rate = 0.0001 +/- 3e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 3.02'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Oct 23 10:39:35 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.403
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 95 for pass 0, mean size = 0.58"
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95.ximg exists
[Sun Oct 23 10:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95.csv
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95_1.ximg exists
[Sun Oct 23 10:39:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95.csv
[Sun Oct 23 10:39:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:41 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src95.ximg exists
[Sun Oct 23 10:39:41 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src95_1.ximg exists
[Sun Oct 23 10:39:41 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src95 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 23.891900, observed total counts = 24.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 28 = 0.767919 pixels
[Sun Oct 23 10:40:36 2011] 23.790970 total counts/ 7.083870 bgd. counts: snr = 6.277197
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.767919 pixels
  Position = (1152.8, 635.6) = 5 22 58.43 33 25 53.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 16.7 +/- 4.9
  Background counts = 7.1
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sun Oct 23 10:41:47 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.319
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 94 for pass 1, mean size = 0.40"
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94.csv
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94_1.ximg exists
[Sun Oct 23 10:41:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94.csv
[Sun Oct 23 10:41:51 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:54 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src94.ximg exists
[Sun Oct 23 10:41:54 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src94_1.ximg exists
[Sun Oct 23 10:41:54 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src94 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 24.383600, observed total counts = 25.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 28 = 0.024920 pixels
[Sun Oct 23 10:42:47 2011] 24.299190 total counts/ 8.298490 bgd. counts: snr = 5.554429
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.024920 pixels
  Position = (1152.8, 635.6) = 5 22 58.43 33 25 53.3
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 16.0 +/- 4.9
  Background counts = 8.3
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:35 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.reg
[Sun Oct 23 10:47:35 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (1135, 618) - (1170, 653)
[Sun Oct 23 10:47:35 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28.gif
[Sun Oct 23 10:52:04 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun Oct 23 10:52:04 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.evt.gz[events] = 18 counts
[Sun Oct 23 10:52:04 2011] Mean chipx,y = (26.11, 660.28)
[Sun Oct 23 10:52:04 2011] Mean tdetx,y = (4471.72, 4133.11)
[Sun Oct 23 10:52:04 2011] chipx,y range = (13.00-44.00, 643.00-675.00)
[Sun Oct 23 10:52:04 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 11 counts
[Sun Oct 23 10:52:04 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun Oct 23 10:52:04 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun Oct 23 10:52:04 2011] Not generating rmf since there are only 16 counts
[Sun Oct 23 10:52:07 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:55 2011] 200.469
[Sun Oct 23 11:06:59 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:59 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28_src.pi.gz
[Sun Oct 23 11:07:01 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:01 2011] Using photon index=1.80, rate=0.000127, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src28.arf
[Sun Oct 23 11:07:01 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:01 2011] Updating source flux to 1.6e-15
[Sun Oct 23 11:07:54 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting