[Sun Oct 23 10:36:53 2011] Detection parameters:
  Position = (886.2, 631.7) = 5 23 8.89 33 25 51.5
  Extent = 0.7" x 0.5", rotation angle = 9 degrees
  Source counts = 70.4 +/- 8.7
  Background counts = 4.6
  Rate = 0.0006 +/- 7e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 4.65'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 1.05 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Sun Oct 23 10:39:35 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.906
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.05"
[Sun Oct 23 10:39:37 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20.ximg exists
[Sun Oct 23 10:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20.csv
[Sun Oct 23 10:39:37 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Oct 23 10:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20.csv
[Sun Oct 23 10:39:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct 23 10:39:39 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 80.410500, observed total counts = 79.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 27 = 0.808302 pixels
[Sun Oct 23 10:40:36 2011] 80.852810 total counts/ 8.044410 bgd. counts: snr = 25.670504
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.808302 pixels
  Position = (886.8, 632.2) = 5 23 8.88 33 25 51.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 72.8 +/- 9.0
  Background counts = 8.0
  Rate = 0.0006 +/- 7e-05
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sun Oct 23 10:41:47 2011] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.878
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.80"
[Sun Oct 23 10:41:50 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20.ximg exists
[Sun Oct 23 10:41:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20.csv
[Sun Oct 23 10:41:50 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20_1.ximg exists
[Sun Oct 23 10:41:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20.csv
[Sun Oct 23 10:41:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:52 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct 23 10:41:52 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct 23 10:41:52 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 78.999300, observed total counts = 79.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 27 = 0.025699 pixels
[Sun Oct 23 10:42:47 2011] 79.458940 total counts/ 7.792240 bgd. counts: snr = 25.673569
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.025699 pixels
  Position = (886.8, 632.2) = 5 23 8.88 33 25 51.5
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 71.7 +/- 8.9
  Background counts = 7.8
  Rate = 0.0006 +/- 7e-05
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:33 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.reg
[Sun Oct 23 10:47:33 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (850, 595) - (924, 669)
[Sun Oct 23 10:47:33 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27.gif
[Sun Oct 23 10:48:35 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun Oct 23 10:48:35 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.evt.gz[events] = 75 counts
[Sun Oct 23 10:48:35 2011] Mean chipx,y = (281.88, 575.52)
[Sun Oct 23 10:48:35 2011] Mean tdetx,y = (4556.48, 4388.88)
[Sun Oct 23 10:48:35 2011] chipx,y range = (264.00-301.00, 556.00-592.00)
[Sun Oct 23 10:48:35 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 54 counts
[Sun Oct 23 10:48:35 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun Oct 23 10:48:35 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun Oct 23 10:48:35 2011] Not generating rmf since there are only 71 counts
[Sun Oct 23 10:48:38 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:53 2011] 194.194
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27_src.pi.gz
[Sun Oct 23 11:07:00 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:00 2011] Using photon index=1.80, rate=0.000568, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src27.arf
[Sun Oct 23 11:07:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:00 2011] Updating source flux to 7.3e-15
[Sun Oct 23 11:07:54 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting