[Sun Oct 23 10:36:57 2011] Detection parameters:
  Position = (903.9, 961.2) = 5 23 8.20 33 28 33.6
  Extent = 0.7" x 0.5", rotation angle = 173 degrees
  Source counts = 22.3 +/- 5.2
  Background counts = 4.7
  Rate = 0.0002 +/- 4e-05

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 3.78'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 0.77 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Sun Oct 23 10:39:35 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 77 for pass 0, mean size = 0.77"
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77.csv
[Sun Oct 23 10:39:38 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77_1.ximg exists
[Sun Oct 23 10:39:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77.csv
[Sun Oct 23 10:39:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src77.ximg exists
[Sun Oct 23 10:39:40 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src77_1.ximg exists
[Sun Oct 23 10:39:40 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src77 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 149.096000, observed total counts = 149.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 100 = 0.669581 pixels
[Sun Oct 23 10:40:36 2011] 145.939790 total counts/ 139.129000 bgd. counts: snr = 0.577416
Spatial fit parameters:
  Offset between fit and detection position for source 100 = 0.669581 pixels
  Position = (904.6, 961.3) = 5 23 8.19 33 28 33.5
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 6.8 +/- 12.1
  Background counts = 139.1
  Rate = 5e-05 +/- 0.0001
  Deleting source due to low Poisson probability