[Sun Oct 23 10:36:52 2011] Detection parameters:
  Position = (573.5, 1105.5) = 5 23 21.20 33 29 44.5
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 294.4 +/- 18.1
  Background counts = 33.6
  Rate = 0.002 +/- 0.0001

[Sun Oct 23 10:37:00 2011] Off-axis axis estimate = 6.63'
[Sun Oct 23 10:39:35 2011] Using EEF radius (= 1.96 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:39:35 2011] Initial guess for spatial extent in simple fitting = 1.96"
[Sun Oct 23 10:39:35 2011] source mask rpix=4.0, npix_max = 80, mask sum = 72, frac = 0.892
[Sun Oct 23 10:39:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.96"
[Sun Oct 23 10:39:37 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 10:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:37 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 10:39:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 10:39:39 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:39:39 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:40:36 2011] Spatial fit model total counts = 372.396000, observed total counts = 370.000000
[Sun Oct 23 10:40:36 2011] Offset between fit and detection position for source 1 = 1.007326 pixels
[Sun Oct 23 10:40:36 2011] 372.667600 total counts/ 55.471600 bgd. counts: snr = 42.588501
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.007326 pixels
  Position = (574.2, 1106.2) = 5 23 21.19 33 29 44.6
  Extent = 1.8 (1.7-2.0)", rotation angle = 0
  Source counts = 317.2 +/- 19.3
  Background counts = 55.5
  Rate = 0.003 +/- 0.0002
[Sun Oct 23 10:40:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:36 2011] Source does appear to be extended
[Sun Oct 23 10:40:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:41:47 2011] Initial guess for spatial extent in simple fitting = 1.84"
[Sun Oct 23 10:41:47 2011] source mask rpix=3.7, npix_max = 71, mask sum = 56, frac = 0.778
[Sun Oct 23 10:41:47 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.84"
[Sun Oct 23 10:41:49 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 10:41:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:49 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 10:41:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06407_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 10:41:51 2011] fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:41:51 2011] Fit fullrun_ccd1_acisf06407_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:42:47 2011] Spatial fit model total counts = 366.316000, observed total counts = 364.000000
[Sun Oct 23 10:42:47 2011] Offset between fit and detection position for source 1 = 0.023253 pixels
[Sun Oct 23 10:42:47 2011] 366.746800 total counts/ 49.902800 bgd. counts: snr = 44.852126
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.023253 pixels
  Position = (574.2, 1106.2) = 5 23 21.19 33 29 44.6
  Extent = 1.8 (1.7-2.0)", rotation angle = 0
  Source counts = 316.8 +/- 19.2
  Background counts = 49.9
  Rate = 0.003 +/- 0.0002
[Sun Oct 23 10:42:47 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:47 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:47 2011] Source does appear to be extended
[Sun Oct 23 10:42:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:47:32 2011] Not overwriting source region fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 10:47:32 2011] Extracting stamp from image fullrun_ccd1_acisf06407_pi14-548_cl_sm2.00.img.gz, (490, 1022) - (658, 1190)
[Sun Oct 23 10:47:32 2011] Writing fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 10:47:40 2011] ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.evt and ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 10:47:40 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.evt.gz[events] = 356 counts
[Sun Oct 23 10:47:40 2011] Mean chipx,y = (722.76, 932.77)
[Sun Oct 23 10:47:40 2011] Mean tdetx,y = (4199.23, 4829.76)
[Sun Oct 23 10:47:40 2011] chipx,y range = (697.00-751.00, 912.00-957.00)
[Sun Oct 23 10:47:40 2011] Size of ../../acisf06407/products/events/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 318 counts
[Sun Oct 23 10:47:40 2011] ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.img and ../../acisf06407/products/images/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 10:47:40 2011] ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.pi and ../../acisf06407/products/spectra/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 10:47:42 2011] ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 10:53:52 2011] Keeping rmf generated by specextract
[Sun Oct 23 10:53:52 2011] 177.844
[Sun Oct 23 11:06:58 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:58 2011] Error reading totcts from fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 11:06:59 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:06:59 2011] Using photon index=1.80, rate=0.00251, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 11:06:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:06:59 2011] Updating source flux to 3.5e-14
[Sun Oct 23 11:08:29 2011] Reading fit data from acisf06407/analysis//spectral/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 11:08:29 2011] Spectral fit parameter nH value = 5.33596e+21
[Sun Oct 23 11:08:29 2011] Spectral fit parameter PhoIndex value = 7.24907
[Sun Oct 23 11:08:29 2011] Failed to get F(0.3-8.0) from acisf06407/analysis//spectral/fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 11:08:29 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:08:29 2011] Using Nh = 5.3e+21, photon index=7.25, rate=0.00251, arf fullrun_ccd1_acisf06407_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 11:08:29 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:08:29 2011] Updating source flux to 2.9e-14