[Sun Oct 23 10:36:48 2011] Detection parameters:
  Position = (794.8, 228.1) = 5 23 0.03 33 30 38.6
  Extent = 0.9" x 0.5", rotation angle = 139 degrees
  Source counts = 41.8 +/- 6.8
  Background counts = 4.2
  Rate = 0.0003 +/- 5e-05

[Sun Oct 23 10:36:52 2011] Off-axis axis estimate = 3.08'
[Sun Oct 23 10:39:29 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:29 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sun Oct 23 10:39:29 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.024
[Sun Oct 23 10:39:29 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.60"
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28.ximg exists
[Sun Oct 23 10:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28.csv
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28_1.ximg exists
[Sun Oct 23 10:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28.csv
[Sun Oct 23 10:39:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:33 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Sun Oct 23 10:39:34 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Oct 23 10:39:34 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Oct 23 10:40:23 2011] Spatial fit model total counts = 51.999200, observed total counts = 52.000000
[Sun Oct 23 10:40:23 2011] Offset between fit and detection position for source 28 = 0.805233 pixels
[Sun Oct 23 10:40:23 2011] 52.670200 total counts/ 13.838900 bgd. counts: snr = 10.438333
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.805233 pixels
  Position = (794.9, 228.9) = 5 23 0.05 33 30 38.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 38.8 +/- 7.3
  Background counts = 13.8
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:40:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:23 2011] Source does appear to be extended
[Sun Oct 23 10:40:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:42 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sun Oct 23 10:41:42 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.336
[Sun Oct 23 10:41:42 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.61"
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28.csv
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28_1.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28.csv
[Sun Oct 23 10:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Sun Oct 23 10:41:46 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Sun Oct 23 10:42:34 2011] Spatial fit model total counts = 51.999900, observed total counts = 52.000000
[Sun Oct 23 10:42:34 2011] Offset between fit and detection position for source 28 = 0.009279 pixels
[Sun Oct 23 10:42:34 2011] 52.417400 total counts/ 13.668900 bgd. counts: snr = 10.480647
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.009279 pixels
  Position = (794.9, 228.9) = 5 23 0.05 33 30 38.8
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 38.7 +/- 7.2
  Background counts = 13.7
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:42:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:34 2011] Source does appear to be extended
[Sun Oct 23 10:42:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:43:55 2011] Not overwriting source region fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.reg
[Sun Oct 23 10:43:55 2011] Extracting stamp from image fullrun_ccd0_acisf06407_pi14-548_cl_sm2.00.img.gz, (767, 201) - (822, 256)
[Sun Oct 23 10:43:55 2011] Writing fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28.gif
[Sun Oct 23 10:45:15 2011] ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.evt and ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_bgd.evt exist, delete to re-create
[Sun Oct 23 10:45:15 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.evt.gz[events] = 43 counts
[Sun Oct 23 10:45:15 2011] Mean chipx,y = (784.16, 867.49)
[Sun Oct 23 10:45:15 2011] Mean tdetx,y = (3928.49, 4347.84)
[Sun Oct 23 10:45:15 2011] chipx,y range = (766.00-801.00, 854.00-886.00)
[Sun Oct 23 10:45:15 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_bgd.evt.gz[events] = 39 counts
[Sun Oct 23 10:45:15 2011] ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.img and ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_bgd.img exist, delete to re-create
[Sun Oct 23 10:45:15 2011] ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.pi and ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_bgd.pi exist, delete to re-create
[Sun Oct 23 10:45:15 2011] Not generating rmf since there are only 38 counts
[Sun Oct 23 10:45:18 2011] ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_bgd.lc exist, delete to re-create
[Sun Oct 23 10:47:31 2011] 182.944
[Sun Oct 23 11:06:56 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:56 2011] Error reading totcts from fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28_src.pi.gz
[Sun Oct 23 11:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:06:57 2011] Using photon index=1.80, rate=0.000307, arf fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src28.arf
[Sun Oct 23 11:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:06:57 2011] Updating source flux to 4.2e-15
[Sun Oct 23 11:07:21 2011] Source 28 has fewer than 100.000000 counts, skipping spectral fitting