[Sun Oct 23 10:36:48 2011] Detection parameters:
  Position = (918.7, 147.6) = 5 22 55.15 33 29 59.0
  Extent = 0.5" x 0.5", rotation angle = 171 degrees
  Source counts = 17.8 +/- 4.5
  Background counts = 2.2
  Rate = 0.0001 +/- 4e-05

[Sun Oct 23 10:36:52 2011] Off-axis axis estimate = 1.93'
[Sun Oct 23 10:39:29 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:29 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct 23 10:39:29 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.215
[Sun Oct 23 10:39:29 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.42"
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27.ximg exists
[Sun Oct 23 10:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27.csv
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27_1.ximg exists
[Sun Oct 23 10:39:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27.csv
[Sun Oct 23 10:39:32 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:33 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Sun Oct 23 10:39:33 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Sun Oct 23 10:39:33 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Sun Oct 23 10:40:23 2011] Spatial fit model total counts = 24.951600, observed total counts = 24.000000
[Sun Oct 23 10:40:23 2011] Offset between fit and detection position for source 27 = 1.122447 pixels
[Sun Oct 23 10:40:23 2011] 25.520840 total counts/ 6.785040 bgd. counts: snr = 7.192768
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.122447 pixels
  Position = (919.5, 148.4) = 5 22 55.14 33 29 59.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 18.7 +/- 5.1
  Background counts = 6.8
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:40:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:23 2011] Source does appear to be extended
[Sun Oct 23 10:40:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:42 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sun Oct 23 10:41:42 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.049
[Sun Oct 23 10:41:42 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 0.47"
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27.csv
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27_1.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27.csv
[Sun Oct 23 10:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Oct 23 10:41:46 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Oct 23 10:42:34 2011] Spatial fit model total counts = 26.452900, observed total counts = 26.000000
[Sun Oct 23 10:42:34 2011] Offset between fit and detection position for source 27 = 0.006117 pixels
[Sun Oct 23 10:42:34 2011] 27.113140 total counts/ 8.709740 bgd. counts: snr = 6.235847
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.006117 pixels
  Position = (919.5, 148.4) = 5 22 55.14 33 29 59.2
  Extent = 0.5 (0.4-0.7)", rotation angle = 0
  Source counts = 18.4 +/- 5.2
  Background counts = 8.7
  Rate = 0.0001 +/- 4e-05
[Sun Oct 23 10:42:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:34 2011] Source does appear to be extended
[Sun Oct 23 10:42:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:43:55 2011] Not overwriting source region fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.reg
[Sun Oct 23 10:43:55 2011] Extracting stamp from image fullrun_ccd0_acisf06407_pi14-548_cl_sm2.00.img.gz, (898, 127) - (941, 170)
[Sun Oct 23 10:43:55 2011] Writing fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27.gif
[Sun Oct 23 10:45:13 2011] ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.evt and ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_bgd.evt exist, delete to re-create
[Sun Oct 23 10:45:13 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.evt.gz[events] = 20 counts
[Sun Oct 23 10:45:13 2011] Mean chipx,y = (924.30, 908.50)
[Sun Oct 23 10:45:13 2011] Mean tdetx,y = (3969.50, 4207.70)
[Sun Oct 23 10:45:13 2011] chipx,y range = (909.00-942.00, 894.00-927.00)
[Sun Oct 23 10:45:13 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 21 counts
[Sun Oct 23 10:45:13 2011] ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.img and ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_bgd.img exist, delete to re-create
[Sun Oct 23 10:45:13 2011] ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.pi and ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_bgd.pi exist, delete to re-create
[Sun Oct 23 10:45:13 2011] Not generating rmf since there are only 18 counts
[Sun Oct 23 10:45:15 2011] ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_bgd.lc exist, delete to re-create
[Sun Oct 23 10:47:31 2011] 192.736
[Sun Oct 23 11:06:56 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:56 2011] Error reading totcts from fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27_src.pi.gz
[Sun Oct 23 11:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:06:57 2011] Using photon index=1.80, rate=0.000146, arf fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src27.arf
[Sun Oct 23 11:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:06:57 2011] Updating source flux to 1.9e-15
[Sun Oct 23 11:07:21 2011] Source 27 has fewer than 100.000000 counts, skipping spectral fitting