[Sun Oct 23 10:36:47 2011] Detection parameters:
  Position = (305.3, 457.0) = 5 23 19.30 33 32 31.1
  Extent = 1.0" x 0.7", rotation angle = 131 degrees
  Source counts = 65.4 +/- 9.2
  Background counts = 18.6
  Rate = 0.0005 +/- 7e-05

[Sun Oct 23 10:36:52 2011] Off-axis axis estimate = 7.37'
[Sun Oct 23 10:39:29 2011] Using EEF radius (= 2.41 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:29 2011] Initial guess for spatial extent in simple fitting = 2.41"
[Sun Oct 23 10:39:29 2011] source mask rpix=4.9, npix_max = 116, mask sum = 110, frac = 0.946
[Sun Oct 23 10:39:29 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 2.41"
[Sun Oct 23 10:39:31 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18.ximg exists
[Sun Oct 23 10:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 10:39:31 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18_1.ximg exists
[Sun Oct 23 10:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18.csv
[Sun Oct 23 10:39:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:33 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sun Oct 23 10:39:33 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sun Oct 23 10:39:33 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sun Oct 23 10:40:23 2011] Spatial fit model total counts = 98.997100, observed total counts = 101.000000
[Sun Oct 23 10:40:23 2011] Offset between fit and detection position for source 18 = 0.614865 pixels
[Sun Oct 23 10:40:23 2011] 99.486100 total counts/ 57.025900 bgd. counts: snr = 5.622714
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.614865 pixels
  Position = (306.0, 457.1) = 5 23 19.29 33 32 30.8
  Extent = 1.0 (0.7-1.5)", rotation angle = 0
  Source counts = 42.5 +/- 10.0
  Background counts = 57.0
  Rate = 0.0003 +/- 8e-05
[Sun Oct 23 10:40:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:23 2011] Source does appear to be extended
[Sun Oct 23 10:40:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:42 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Sun Oct 23 10:41:42 2011] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.313
[Sun Oct 23 10:41:42 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.04"
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18_1.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18.csv
[Sun Oct 23 10:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sun Oct 23 10:41:46 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Oct 23 10:41:46 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Oct 23 10:42:34 2011] Spatial fit model total counts = 65.103500, observed total counts = 65.000000
[Sun Oct 23 10:42:34 2011] Offset between fit and detection position for source 18 = 0.345799 pixels
[Sun Oct 23 10:42:34 2011] 64.710700 total counts/ 31.001000 bgd. counts: snr = 6.054343
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.345799 pixels
  Position = (306.2, 456.8) = 5 23 19.28 33 32 30.7
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 33.7 +/- 8.0
  Background counts = 31.0
  Rate = 0.0003 +/- 6e-05
[Sun Oct 23 10:42:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:34 2011] Source does appear to be extended
[Sun Oct 23 10:42:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:43:55 2011] Not overwriting source region fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.reg
[Sun Oct 23 10:43:55 2011] Extracting stamp from image fullrun_ccd0_acisf06407_pi14-548_cl_sm2.00.img.gz, (269, 420) - (343, 494)
[Sun Oct 23 10:43:55 2011] Writing fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18.gif
[Sun Oct 23 10:44:49 2011] ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.evt and ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sun Oct 23 10:44:49 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.evt.gz[events] = 51 counts
[Sun Oct 23 10:44:49 2011] Mean chipx,y = (246.51, 795.45)
[Sun Oct 23 10:44:49 2011] Mean tdetx,y = (3856.45, 4885.49)
[Sun Oct 23 10:44:49 2011] chipx,y range = (228.00-266.00, 776.00-813.00)
[Sun Oct 23 10:44:49 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 71 counts
[Sun Oct 23 10:44:49 2011] ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.img and ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sun Oct 23 10:44:49 2011] ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.pi and ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sun Oct 23 10:44:49 2011] Not generating rmf since there are only 33 counts
[Sun Oct 23 10:44:51 2011] ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sun Oct 23 10:47:31 2011] 167.364
[Sun Oct 23 11:06:56 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:56 2011] Error reading totcts from fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18_src.pi.gz
[Sun Oct 23 11:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:06:57 2011] Using photon index=1.80, rate=0.000267, arf fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src18.arf
[Sun Oct 23 11:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:06:57 2011] Updating source flux to 3.9e-15
[Sun Oct 23 11:07:21 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting