[Sun Oct 23 10:36:46 2011] Detection parameters:
  Position = (792.5, 820.6) = 5 23 0.13 33 35 30.2
  Extent = 0.5" x 0.5", rotation angle = 120 degrees
  Source counts = 431.9 +/- 21.9
  Background counts = 48.1
  Rate = 0.003 +/- 0.0002

[Sun Oct 23 10:36:52 2011] Off-axis axis estimate = 7.44'
[Sun Oct 23 10:39:29 2011] Using EEF radius (= 2.45 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:39:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:39:29 2011] Initial guess for spatial extent in simple fitting = 2.45"
[Sun Oct 23 10:39:29 2011] source mask rpix=5.0, npix_max = 120, mask sum = 113, frac = 0.939
[Sun Oct 23 10:39:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.45"
[Sun Oct 23 10:39:31 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 23 10:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:31 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 23 10:39:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1.csv
[Sun Oct 23 10:39:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 23 10:39:32 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:39:32 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:40:23 2011] Spatial fit model total counts = 534.661000, observed total counts = 517.000000
[Sun Oct 23 10:40:23 2011] Offset between fit and detection position for source 1 = 0.669288 pixels
[Sun Oct 23 10:40:23 2011] 534.438800 total counts/ 67.595800 bgd. counts: snr = 56.782040
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.669288 pixels
  Position = (793.0, 821.1) = 5 23 0.13 33 35 30.1
  Extent = 2.3 (2.1-2.4)", rotation angle = 0
  Source counts = 466.8 +/- 23.1
  Background counts = 67.6
  Rate = 0.004 +/- 0.0002
[Sun Oct 23 10:40:23 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:40:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:40:23 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:40:23 2011] Source does appear to be extended
[Sun Oct 23 10:40:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:41:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 10:41:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 23 10:41:42 2011] Initial guess for spatial extent in simple fitting = 2.26"
[Sun Oct 23 10:41:42 2011] source mask rpix=4.6, npix_max = 104, mask sum = 93, frac = 0.894
[Sun Oct 23 10:41:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.26"
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:44 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 23 10:41:44 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1.csv
[Sun Oct 23 10:41:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06407_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 10:41:45 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 23 10:41:45 2011] fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 23 10:41:45 2011] Fit fullrun_ccd0_acisf06407_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 23 10:42:34 2011] Spatial fit model total counts = 528.629000, observed total counts = 511.000000
[Sun Oct 23 10:42:34 2011] Offset between fit and detection position for source 1 = 0.026474 pixels
[Sun Oct 23 10:42:34 2011] 528.340000 total counts/ 66.787000 bgd. counts: snr = 56.477519
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.026474 pixels
  Position = (793.0, 821.1) = 5 23 0.13 33 35 30.1
  Extent = 2.2 (2.1-2.4)", rotation angle = 0
  Source counts = 461.6 +/- 23.0
  Background counts = 66.8
  Rate = 0.004 +/- 0.0002
[Sun Oct 23 10:42:34 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 10:42:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 10:42:34 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 10:42:34 2011] Source does appear to be extended
[Sun Oct 23 10:42:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 10:43:54 2011] Not overwriting source region fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 23 10:43:54 2011] Extracting stamp from image fullrun_ccd0_acisf06407_pi14-548_cl_sm2.00.img.gz, (691, 719) - (895, 923)
[Sun Oct 23 10:43:54 2011] Writing fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1.gif
[Sun Oct 23 10:44:00 2011] ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.evt and ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 23 10:44:00 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.evt.gz[events] = 496 counts
[Sun Oct 23 10:44:00 2011] Mean chipx,y = (601.28, 303.95)
[Sun Oct 23 10:44:00 2011] Mean tdetx,y = (3364.95, 4530.72)
[Sun Oct 23 10:44:00 2011] chipx,y range = (574.00-633.00, 272.00-337.00)
[Sun Oct 23 10:44:00 2011] Size of ../../acisf06407/products/events/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 421 counts
[Sun Oct 23 10:44:00 2011] ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.img and ../../acisf06407/products/images/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 23 10:44:00 2011] ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.pi and ../../acisf06407/products/spectra/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sun Oct 23 10:44:02 2011] ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.lc and ../../acisf06407/products/lightcurves/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 23 10:47:30 2011] Keeping rmf generated by specextract
[Sun Oct 23 10:47:30 2011] 170.762
[Sun Oct 23 11:06:56 2011] Updating aperture counts using extracted products
[Sun Oct 23 11:06:56 2011] Error reading totcts from fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_src.pi.gz
[Sun Oct 23 11:06:57 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:06:57 2011] Using photon index=1.80, rate=0.00366, arf fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 11:06:57 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:06:57 2011] Updating source flux to 5.3e-14
[Sun Oct 23 11:07:54 2011] Reading fit data from acisf06407/analysis//spectral/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_pl.csv
[Sun Oct 23 11:07:54 2011] Spectral fit parameter nH value = 1.13573e+22
[Sun Oct 23 11:07:54 2011] Spectral fit parameter PhoIndex value = 1.50008
[Sun Oct 23 11:07:54 2011] Failed to get F(0.3-8.0) from acisf06407/analysis//spectral/fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Oct 23 11:07:54 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 11:07:54 2011] Using Nh = 1.1e+22, photon index=1.50, rate=0.00366, arf fullrun_ccd0_acisf06407_pi14-548_pass1_cl_src1.arf
[Sun Oct 23 11:07:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 11:07:54 2011] Updating source flux to 7.1e-14