[Thu Oct  6 13:09:58 2011] Detection parameters:
  Position = (582.2, 667.6) = 5 22 41.74 33 23 32.3
  Extent = 1.1" x 0.7", rotation angle = 27 degrees
  Source counts = 28.2 +/- 5.7
  Background counts = 4.8
  Rate = 0.0002 +/- 5e-05

[Thu Oct  6 13:10:10 2011] Off-axis axis estimate = 5.13'
[Thu Oct  6 13:12:45 2011] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 13:12:45 2011] Initial guess for spatial extent in simple fitting = 1.23"
[Thu Oct  6 13:12:45 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Thu Oct  6 13:12:45 2011] Giving source the simple spatial ID 91 for pass 0, mean size = 1.23"
[Thu Oct  6 13:12:48 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91.ximg exists
[Thu Oct  6 13:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91.csv
[Thu Oct  6 13:12:48 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91_1.ximg exists
[Thu Oct  6 13:12:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91.csv
[Thu Oct  6 13:12:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06406_pi14-548_cl_pass0_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 13:12:53 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass0_tfrozen_src91.ximg exists
[Thu Oct  6 13:12:53 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass0_tfrozen_src91_1.ximg exists
[Thu Oct  6 13:12:53 2011] Fit fullrun_ccd3_acisf06406_pi14-548_cl_pass0_tfrozen_src91 appears to have run properly
[Thu Oct  6 13:13:54 2011] Spatial fit model total counts = 36.997000, observed total counts = 37.000000
[Thu Oct  6 13:13:54 2011] Offset between fit and detection position for source 30 = 1.315171 pixels
[Thu Oct  6 13:13:54 2011] 36.979700 total counts/ 14.086200 bgd. counts: snr = 6.099795
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 1.315171 pixels
  Position = (583.5, 667.8) = 5 22 41.70 33 23 32.2
  Extent = 0.9 (0.6-1.4)", rotation angle = 0
  Source counts = 22.9 +/- 6.1
  Background counts = 14.1
  Rate = 0.0002 +/- 5e-05
[Thu Oct  6 13:13:54 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 13:13:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 13:13:54 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 13:13:54 2011] Source does appear to be extended
[Thu Oct  6 13:13:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 13:15:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 13:15:04 2011] Initial guess for spatial extent in simple fitting = 0.89"
[Thu Oct  6 13:15:04 2011] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.172
[Thu Oct  6 13:15:04 2011] Giving source the simple spatial ID 89 for pass 1, mean size = 0.89"
[Thu Oct  6 13:15:10 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89.ximg exists
[Thu Oct  6 13:15:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89.csv
[Thu Oct  6 13:15:10 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89_1.ximg exists
[Thu Oct  6 13:15:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89.csv
[Thu Oct  6 13:15:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06406_pi14-548_cl_pass1_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 13:15:12 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass1_tfrozen_src89.ximg exists
[Thu Oct  6 13:15:12 2011] fullrun_ccd3_acisf06406_pi14-548_cl_pass1_tfrozen_src89_1.ximg exists
[Thu Oct  6 13:15:12 2011] Fit fullrun_ccd3_acisf06406_pi14-548_cl_pass1_tfrozen_src89 appears to have run properly
[Thu Oct  6 13:16:13 2011] Spatial fit model total counts = 36.994800, observed total counts = 37.000000
[Thu Oct  6 13:16:13 2011] Offset between fit and detection position for source 30 = 0.100435 pixels
[Thu Oct  6 13:16:13 2011] 36.401400 total counts/ 13.382500 bgd. counts: snr = 6.292394
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.100435 pixels
  Position = (583.5, 667.9) = 5 22 41.70 33 23 32.2
  Extent = 0.9 (0.6-1.3)", rotation angle = 0
  Source counts = 23.0 +/- 6.0
  Background counts = 13.4
  Rate = 0.0002 +/- 5e-05
[Thu Oct  6 13:16:13 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 13:16:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 13:16:13 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 13:16:13 2011] Source does appear to be extended
[Thu Oct  6 13:16:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 13:56:25 2011] Not overwriting source region fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.reg
[Thu Oct  6 13:56:25 2011] Extracting stamp from image fullrun_ccd3_acisf06406_pi14-548_cl_sm2.00.img.gz, (543, 627) - (624, 709)
[Thu Oct  6 13:56:25 2011] Writing fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30.gif
[Thu Oct  6 14:07:44 2011] ../../acisf06406/products/events/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.evt and ../../acisf06406/products/events/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Thu Oct  6 14:07:45 2011] Size of ../../acisf06406/products/events/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.evt.gz[events] = 33 counts
[Thu Oct  6 14:07:45 2011] Mean chipx,y = (576.64, 513.58)
[Thu Oct  6 14:07:45 2011] Mean tdetx,y = (4618.42, 3637.64)
[Thu Oct  6 14:07:45 2011] chipx,y range = (562.00-603.00, 495.00-533.00)
[Thu Oct  6 14:07:45 2011] Size of ../../acisf06406/products/events/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 70 counts
[Thu Oct  6 14:07:45 2011] ../../acisf06406/products/images/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.img and ../../acisf06406/products/images/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Thu Oct  6 14:07:45 2011] Not generating rmf since there are only 23 counts
[Thu Oct  6 14:07:45 2011] arf not found, will run specextract
[Thu Oct  6 14:07:47 2011] ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_bkg.pi not found
[Thu Oct  6 14:07:47 2011] ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30.warf not found
[Thu Oct  6 14:07:47 2011] ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30.wrmf not found
[Thu Oct  6 14:07:47 2011] Removal of ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30.soff failed
[Thu Oct  6 14:07:47 2011] Failed to rename ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_grp.pi to ../../acisf06406/products/spectra/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.pi
[Thu Oct  6 14:07:52 2011] ../../acisf06406/products/lightcurves/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.lc and ../../acisf06406/products/lightcurves/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Thu Oct  6 14:26:49 2011] No arf file found
[Thu Oct  6 14:27:35 2011] Updating aperture counts using extracted products
[Thu Oct  6 14:27:35 2011] Error reading totcts from fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_src.pi
[Thu Oct  6 14:27:37 2011] No arf file for this source, not re-computing flux
[Thu Oct  6 14:27:52 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 14:27:53 2011] acisf06406/analysis//spectral/fullrun_ccd3_acisf06406_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete