[Thu Oct  6 13:09:49 2011] Detection parameters:
  Position = (184.7, 286.4) = 5 22 44.97 33 28 32.9
  Extent = 0.5" x 0.5", rotation angle = 79 degrees
  Source counts = 12.6 +/- 3.9
  Background counts = 2.4
  Rate = 0.0001 +/- 3e-05

[Thu Oct  6 13:09:55 2011] Off-axis axis estimate = 1.09'
[Thu Oct  6 13:12:34 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 13:12:34 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Oct  6 13:12:34 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.388
[Thu Oct  6 13:12:34 2011] Giving source the simple spatial ID 46 for pass 0, mean size = 0.38"
[Thu Oct  6 13:12:41 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46.ximg exists
[Thu Oct  6 13:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46.csv
[Thu Oct  6 13:12:41 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46_1.ximg exists
[Thu Oct  6 13:12:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46.csv
[Thu Oct  6 13:12:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06406_pi14-548_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 13:12:45 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass0_tfrozen_src46.ximg exists
[Thu Oct  6 13:12:45 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass0_tfrozen_src46_1.ximg exists
[Thu Oct  6 13:12:45 2011] Fit fullrun_ccd2_acisf06406_pi14-548_cl_pass0_tfrozen_src46 appears to have run properly
[Thu Oct  6 13:13:40 2011] Spatial fit model total counts = 25.969200, observed total counts = 26.000000
[Thu Oct  6 13:13:40 2011] Offset between fit and detection position for source 11 = 0.807170 pixels
[Thu Oct  6 13:13:40 2011] 27.122200 total counts/ 15.797400 bgd. counts: snr = 2.849297
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.807170 pixels
  Position = (185.5, 286.7) = 5 22 44.96 33 28 32.7
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 11.3 +/- 5.2
  Background counts = 15.8
  Rate = 0.0001 +/- 5e-05
[Thu Oct  6 13:13:40 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 13:13:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 13:13:40 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 13:13:40 2011] Source does appear to be extended
[Thu Oct  6 13:13:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 13:14:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 13:14:58 2011] Initial guess for spatial extent in simple fitting = 0.37"
[Thu Oct  6 13:14:58 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.425
[Thu Oct  6 13:14:58 2011] Giving source the simple spatial ID 44 for pass 1, mean size = 0.37"
[Thu Oct  6 13:15:00 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44.ximg exists
[Thu Oct  6 13:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44.csv
[Thu Oct  6 13:15:00 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44_1.ximg exists
[Thu Oct  6 13:15:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44.csv
[Thu Oct  6 13:15:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06406_pi14-548_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 13:15:04 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44.ximg exists
[Thu Oct  6 13:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44.csv
[Thu Oct  6 13:15:04 2011] fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Oct  6 13:15:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44.csv
[Thu Oct  6 13:15:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06406_pi14-548_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 13:15:59 2011] Spatial fit model total counts = 16.707400, observed total counts = 26.000000
[Thu Oct  6 13:15:59 2011] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Oct  6 13:15:59 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 13:15:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 13:15:59 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 13:15:59 2011] Source does appear to be extended
[Thu Oct  6 13:15:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 13:48:46 2011] Not overwriting source region fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.reg
[Thu Oct  6 13:48:46 2011] Extracting stamp from image fullrun_ccd2_acisf06406_pi14-548_cl_sm2.00.img.gz, (168, 270) - (203, 304)
[Thu Oct  6 13:48:46 2011] Writing fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11.gif
[Thu Oct  6 13:54:20 2011] ../../acisf06406/products/events/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.evt and ../../acisf06406/products/events/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Oct  6 13:54:20 2011] Size of ../../acisf06406/products/events/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.evt.gz[events] = 15 counts
[Thu Oct  6 13:54:20 2011] Mean chipx,y = (179.67, 997.53)
[Thu Oct  6 13:54:20 2011] Mean tdetx,y = (4058.53, 3906.33)
[Thu Oct  6 13:54:20 2011] chipx,y range = (166.00-198.00, 983.00-1016.00)
[Thu Oct  6 13:54:20 2011] Size of ../../acisf06406/products/events/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 20 counts
[Thu Oct  6 13:54:20 2011] ../../acisf06406/products/images/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.img and ../../acisf06406/products/images/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Oct  6 13:54:20 2011] Not generating rmf since there are only 11 counts
[Thu Oct  6 13:54:20 2011] arf not found, will run specextract
[Thu Oct  6 13:54:22 2011] ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_bkg.pi not found
[Thu Oct  6 13:54:22 2011] ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11.warf not found
[Thu Oct  6 13:54:22 2011] ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11.wrmf not found
[Thu Oct  6 13:54:22 2011] Removal of ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11.soff failed
[Thu Oct  6 13:54:22 2011] Failed to rename ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_grp.pi to ../../acisf06406/products/spectra/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.pi
[Thu Oct  6 13:54:31 2011] ../../acisf06406/products/lightcurves/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.lc and ../../acisf06406/products/lightcurves/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Oct  6 13:56:23 2011] No arf file found
[Thu Oct  6 14:27:34 2011] Updating aperture counts using extracted products
[Thu Oct  6 14:27:34 2011] Error reading totcts from fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_src.pi
[Thu Oct  6 14:27:34 2011] No arf file for this source, not re-computing flux
[Thu Oct  6 14:27:51 2011] Flag p found in src. 11 procflags, skipping spectral fitting
[Thu Oct  6 14:27:51 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct  6 14:27:52 2011] acisf06406/analysis//spectral/fullrun_ccd2_acisf06406_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete