[Thu Feb 16 14:31:26 2012] Detection parameters:
  Position = (420.8, 708.3) = 18 19 4.52 -20 50 36.1
  Extent = 0.7" x 0.5", rotation angle = 42 degrees
  Source counts = 36.8 +/- 6.2
  Background counts = 2.2
  Rate = 0.0005 +/- 9e-05

[Thu Feb 16 14:31:29 2012] Off-axis axis estimate = 3.83'
[Thu Feb 16 16:18:28 2012] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 16:18:28 2012] Initial guess for spatial extent in simple fitting = 0.78"
[Thu Feb 16 16:18:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.921
[Thu Feb 16 16:18:28 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 0.78"
[Thu Feb 16 17:34:13 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19.ximg exists
[Thu Feb 16 17:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19.csv
[Thu Feb 16 17:34:13 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19_1.ximg exists
[Thu Feb 16 17:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19.csv
[Thu Feb 16 17:34:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06405_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 17:34:13 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Thu Feb 16 17:34:13 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Feb 16 17:34:13 2012] Fit fullrun_ccd3_acisf06405_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Thu Feb 16 18:02:10 2012] Spatial fit model total counts = 38.767000, observed total counts = 40.000000
[Thu Feb 16 18:02:10 2012] Offset between fit and detection position for source 22 = 0.965753 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.965753 pixels
  Position = (421.5, 709.0) = 18 19 4.51 -20 50 36.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 37.8 +/- 6.1
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Thu Feb 16 18:02:10 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 18:02:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 18:02:10 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 18:02:10 2012] Source does appear to be extended
[Thu Feb 16 18:02:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 19:26:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 19:26:59 2012] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Feb 16 19:26:59 2012] source mask rpix=1.4, npix_max = 15, mask sum = 12, frac = 0.794
[Thu Feb 16 19:26:59 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 0.71"
[Thu Feb 16 20:31:43 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19.ximg exists
[Thu Feb 16 20:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19.csv
[Thu Feb 16 20:31:43 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19_1.ximg exists
[Thu Feb 16 20:31:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19.csv
[Thu Feb 16 20:31:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06405_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 20:31:43 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Thu Feb 16 20:31:43 2012] fullrun_ccd3_acisf06405_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Thu Feb 16 20:31:43 2012] Fit fullrun_ccd3_acisf06405_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Thu Feb 16 20:58:30 2012] Spatial fit model total counts = 38.798800, observed total counts = 40.000000
[Thu Feb 16 20:58:30 2012] Offset between fit and detection position for source 22 = 0.015094 pixels
[Thu Feb 16 20:58:30 2012] 38.080989 total counts/ 0.000289 bgd. counts: snr = 2240.801162
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.015094 pixels
  Position = (421.5, 708.9) = 18 19 4.51 -20 50 36.0
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 38.1 +/- 6.2
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Thu Feb 16 20:58:30 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 20:58:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 20:58:30 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 20:58:30 2012] Source does appear to be extended
[Thu Feb 16 20:58:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 21:19:11 2012] Writing source region out to fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_src.reg
[Thu Feb 16 21:19:11 2012] Extracting stamp from image fullrun_ccd3_acisf06405_pi14-548_cl_sm2.00.img.gz, (388, 675) - (455, 743)
[Thu Feb 16 21:19:11 2012] Writing fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22.gif
[Thu Feb 16 21:22:28 2012] Size of ../../acisf06405/products/events/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_src.evt.gz[events] = 39 counts
[Thu Feb 16 21:22:28 2012] Mean chipx,y = (684.05, 631.59)
[Thu Feb 16 21:22:28 2012] Mean tdetx,y = (4500.41, 3745.05)
[Thu Feb 16 21:22:28 2012] chipx,y range = (668.00-704.00, 617.00-652.00)
[Thu Feb 16 21:22:28 2012] Size of ../../acisf06405/products/events/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 23 counts
[Thu Feb 16 21:22:29 2012] Not generating rmf since there are only 38 counts
[Thu Feb 16 21:22:29 2012] arf not found, will run specextract
[Thu Feb 16 21:22:31 2012] ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_bkg.pi not found
[Thu Feb 16 21:22:31 2012] ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22.warf not found
[Thu Feb 16 21:22:31 2012] ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22.wrmf not found
[Thu Feb 16 21:22:31 2012] Removal of ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22.soff failed
[Thu Feb 16 21:22:31 2012] Failed to rename ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_grp.pi to ../../acisf06405/products/spectra/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_src.pi
[Thu Feb 16 21:33:13 2012] No arf file found
[Thu Feb 16 21:33:42 2012] Updating aperture counts using extracted products
[Thu Feb 16 21:33:42 2012] Error reading totcts from fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_src.pi
[Thu Feb 16 21:33:43 2012] No arf file for this source, not re-computing flux
[Thu Feb 16 21:33:52 2012] Source 22 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 21:33:53 2012] acisf06405/analysis//spectral/fullrun_ccd3_acisf06405_pi14-548_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete