[Thu Feb 16 14:31:12 2012] Detection parameters:
  Position = (839.4, 202.6) = 18 19 22.08 -20 45 19.1
  Extent = 0.5" x 0.5", rotation angle = 119 degrees
  Source counts = 11.4 +/- 3.6
  Background counts = 1.6
  Rate = 0.0002 +/- 5e-05

[Thu Feb 16 14:31:14 2012] Off-axis axis estimate = 2.94'
[Thu Feb 16 14:34:54 2012] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Thu Feb 16 14:34:54 2012] Initial guess for spatial extent in simple fitting = 0.57"
[Thu Feb 16 14:34:54 2012] source mask rpix=1.2, npix_max = 10, mask sum = 9, frac = 0.820
[Thu Feb 16 14:34:54 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.57"
[Thu Feb 16 15:00:57 2012] fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10.ximg exists
[Thu Feb 16 15:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10.csv
[Thu Feb 16 15:00:57 2012] fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Feb 16 15:00:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10.csv
[Thu Feb 16 15:00:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06405_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 16 15:00:57 2012] fullrun_ccd0_acisf06405_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Feb 16 15:00:57 2012] fullrun_ccd0_acisf06405_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Feb 16 15:00:57 2012] Fit fullrun_ccd0_acisf06405_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Feb 16 18:01:54 2012] Spatial fit model total counts = 22.997500, observed total counts = 23.000000
[Thu Feb 16 18:01:54 2012] Offset between fit and detection position for source 10 = 0.719527 pixels
[Thu Feb 16 18:01:54 2012] 23.229100 total counts/ 11.496100 bgd. counts: snr = 3.460460
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.719527 pixels
  Position = (840.0, 203.0) = 18 19 22.07 -20 45 19.1
  Extent = 0.5 (0.2-0.7)", rotation angle = 0
  Source counts = 11.7 +/- 4.8
  Background counts = 11.5
  Rate = 0.0002 +/- 7e-05
[Thu Feb 16 18:01:54 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 18:01:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 18:01:54 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 18:01:54 2012] Source does appear to be extended
[Thu Feb 16 18:01:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 18:02:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 16 18:02:38 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Thu Feb 16 18:02:38 2012] source mask rpix=1.0, npix_max = 8, mask sum = 4, frac = 0.471
[Thu Feb 16 18:02:38 2012] Skipping simple spatial due to low active detector fraction
[Thu Feb 16 20:58:15 2012] Vigneting correction estimate = 1.000000
[Thu Feb 16 20:58:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 16 20:58:15 2012] Assessing source extent using major axis lower bound
[Thu Feb 16 20:58:15 2012] Source does appear to be extended
[Thu Feb 16 20:58:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 16 20:59:00 2012] Writing source region out to fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_src.reg
[Thu Feb 16 20:59:00 2012] Extracting stamp from image fullrun_ccd0_acisf06405_pi14-548_cl_sm2.00.img.gz, (818, 181) - (862, 225)
[Thu Feb 16 20:59:00 2012] Writing fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10.gif
[Thu Feb 16 21:00:38 2012] Size of ../../acisf06405/products/events/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_src.evt.gz[events] = 13 counts
[Thu Feb 16 21:00:38 2012] Mean chipx,y = (813.38, 848.54)
[Thu Feb 16 21:00:38 2012] Mean tdetx,y = (3909.54, 4318.62)
[Thu Feb 16 21:00:38 2012] chipx,y range = (803.00-833.00, 831.00-865.00)
[Thu Feb 16 21:00:38 2012] Size of ../../acisf06405/products/events/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 16 counts
[Thu Feb 16 21:00:39 2012] Not generating rmf since there are only 11 counts
[Thu Feb 16 21:00:39 2012] arf not found, will run specextract
[Thu Feb 16 21:00:41 2012] ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_bkg.pi not found
[Thu Feb 16 21:00:41 2012] ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10.warf not found
[Thu Feb 16 21:00:41 2012] ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10.wrmf not found
[Thu Feb 16 21:00:41 2012] Removal of ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10.soff failed
[Thu Feb 16 21:00:41 2012] Failed to rename ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_grp.pi to ../../acisf06405/products/spectra/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_src.pi
[Thu Feb 16 21:03:48 2012] No arf file found
[Thu Feb 16 21:33:41 2012] Updating aperture counts using extracted products
[Thu Feb 16 21:33:41 2012] Error reading totcts from fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_src.pi
[Thu Feb 16 21:33:41 2012] No arf file for this source, not re-computing flux
[Thu Feb 16 21:33:49 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 16 21:33:50 2012] acisf06405/analysis//spectral/fullrun_ccd0_acisf06405_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete