[Mon Oct 17 06:27:07 2011] Detection parameters:
  Position = (883.6, 833.9) = 18 33 20.38 -4 59 2.9
  Extent = 0.5" x 0.5", rotation angle = 158 degrees
  Source counts = 14.5 +/- 4.0
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Mon Oct 17 06:27:08 2011] Off-axis axis estimate = 1.16'
[Mon Oct 17 06:28:05 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:28:05 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 17 06:28:05 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Mon Oct 17 06:28:05 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.38"
[Mon Oct 17 06:28:07 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28.ximg exists
[Mon Oct 17 06:28:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28.csv
[Mon Oct 17 06:28:07 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28_1.ximg exists
[Mon Oct 17 06:28:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28.csv
[Mon Oct 17 06:28:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06399_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:28:08 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Mon Oct 17 06:28:08 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Oct 17 06:28:08 2011] Fit fullrun_ccd7_acisf06399_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Mon Oct 17 06:28:18 2011] Spatial fit model total counts = 22.860000, observed total counts = 23.000000
[Mon Oct 17 06:28:18 2011] Offset between fit and detection position for source 23 = 0.664657 pixels
[Mon Oct 17 06:28:18 2011] 23.036260 total counts/ 8.014660 bgd. counts: snr = 5.306078
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.664657 pixels
  Position = (884.0, 834.4) = 18 33 20.39 -4 59 2.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.0 +/- 4.8
  Background counts = 8.0
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 06:28:18 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:28:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:28:18 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:28:18 2011] Source does appear to be extended
[Mon Oct 17 06:28:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:28:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:28:39 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Mon Oct 17 06:28:39 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.771
[Mon Oct 17 06:28:39 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 0.44"
[Mon Oct 17 06:28:41 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28.ximg exists
[Mon Oct 17 06:28:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28.csv
[Mon Oct 17 06:28:41 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28_1.ximg exists
[Mon Oct 17 06:28:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28.csv
[Mon Oct 17 06:28:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06399_pi14-548_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:28:42 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass1_tfrozen_src28.ximg exists
[Mon Oct 17 06:28:42 2011] fullrun_ccd7_acisf06399_pi14-548_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Oct 17 06:28:42 2011] Fit fullrun_ccd7_acisf06399_pi14-548_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Oct 17 06:28:52 2011] Spatial fit model total counts = 22.999700, observed total counts = 23.000000
[Mon Oct 17 06:28:52 2011] Offset between fit and detection position for source 23 = 0.006152 pixels
[Mon Oct 17 06:28:52 2011] 23.033820 total counts/ 7.899020 bgd. counts: snr = 5.385054
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.006152 pixels
  Position = (884.0, 834.4) = 18 33 20.39 -4 59 2.9
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 15.1 +/- 4.8
  Background counts = 7.9
  Rate = 0.0004 +/- 0.0001
[Mon Oct 17 06:28:52 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:28:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:28:52 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:28:52 2011] Source does appear to be extended
[Mon Oct 17 06:28:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:30:19 2011] Not overwriting source region fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.reg
[Mon Oct 17 06:30:19 2011] Extracting stamp from image fullrun_ccd7_acisf06399_pi14-548_cl_sm2.00.img.gz, (864, 814) - (904, 855)
[Mon Oct 17 06:30:19 2011] Writing fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23.gif
[Mon Oct 17 06:31:39 2011] ../../acisf06399/products/events/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.evt and ../../acisf06399/products/events/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Oct 17 06:31:39 2011] Size of ../../acisf06399/products/events/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.evt.gz[events] = 16 counts
[Mon Oct 17 06:31:39 2011] Mean chipx,y = (310.88, 415.88)
[Mon Oct 17 06:31:39 2011] Mean tdetx,y = (4227.88, 2117.88)
[Mon Oct 17 06:31:39 2011] chipx,y range = (295.00-327.00, 400.00-434.00)
[Mon Oct 17 06:31:39 2011] Size of ../../acisf06399/products/events/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 16 counts
[Mon Oct 17 06:31:39 2011] ../../acisf06399/products/images/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.img and ../../acisf06399/products/images/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Oct 17 06:31:39 2011] ../../acisf06399/products/spectra/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.pi and ../../acisf06399/products/spectra/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Oct 17 06:31:39 2011] Not generating rmf since there are only 15 counts
[Mon Oct 17 06:31:42 2011] ../../acisf06399/products/lightcurves/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.lc and ../../acisf06399/products/lightcurves/fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_bgd.lc exist, delete to re-create
[Mon Oct 17 06:32:49 2011] 235.657
[Mon Oct 17 06:32:53 2011] Updating aperture counts using extracted products
[Mon Oct 17 06:32:53 2011] Error reading totcts from fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23_src.pi.gz
[Mon Oct 17 06:32:53 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 06:32:53 2011] Using photon index=1.80, rate=0.000396, arf fullrun_ccd7_acisf06399_pi14-548_pass1_cl_src23.arf
[Mon Oct 17 06:32:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 06:32:53 2011] Updating source flux to 4.4e-15
[Mon Oct 17 06:33:01 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting