[Fri Oct 28 12:38:47 2011] Detection parameters:
  Position = (479.4, 289.4) = 16 6 9.91 -27 40 49.0
  Extent = 4.5" x 3.6", rotation angle = 15 degrees
  Source counts = 96.1 +/- 11.0
  Background counts = 24.9
  Rate = 0.008 +/- 0.0009

[Fri Oct 28 12:38:47 2011] Off-axis axis estimate = 10.81'
[Fri Oct 28 12:39:23 2011] Using EEF radius (= 5.19 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:39:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 12:39:23 2011] Initial guess for spatial extent in simple fitting = 5.19"
[Fri Oct 28 12:39:23 2011] source mask rpix=10.6, npix_max = 488, mask sum = 484, frac = 0.990
[Fri Oct 28 12:39:23 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.19"
[Fri Oct 28 12:39:23 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 12:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 12:39:23 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 12:39:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 12:39:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06398_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:39:23 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 12:39:23 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 12:39:23 2011] Fit fullrun_ccd3_acisf06398_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 12:39:29 2011] Spatial fit model total counts = 143.485000, observed total counts = 144.000000
[Fri Oct 28 12:39:29 2011] Offset between fit and detection position for source 5 = 0.749918 pixels
[Fri Oct 28 12:39:29 2011] 143.247200 total counts/ 32.855200 bgd. counts: snr = 19.259080
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.749918 pixels
  Position = (480.0, 289.8) = 16 6 9.91 -27 40 49.0
  Extent = 5.3 (4.3-6.3)", rotation angle = 0
  Source counts = 110.4 +/- 12.0
  Background counts = 32.9
  Rate = 0.009 +/- 0.0009
[Fri Oct 28 12:39:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:39:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:39:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:39:29 2011] Source does appear to be extended
[Fri Oct 28 12:39:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:39:45 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:39:45 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 12:39:45 2011] Initial guess for spatial extent in simple fitting = 5.31"
[Fri Oct 28 12:39:45 2011] source mask rpix=10.8, npix_max = 510, mask sum = 484, frac = 0.948
[Fri Oct 28 12:39:45 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.31"
[Fri Oct 28 12:39:45 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 12:39:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 12:39:45 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 12:39:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 12:39:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06398_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:39:45 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 12:39:45 2011] fullrun_ccd3_acisf06398_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 12:39:45 2011] Fit fullrun_ccd3_acisf06398_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 12:39:51 2011] Spatial fit model total counts = 145.394000, observed total counts = 145.000000
[Fri Oct 28 12:39:51 2011] Offset between fit and detection position for source 5 = 0.135699 pixels
[Fri Oct 28 12:39:51 2011] 145.124200 total counts/ 31.591200 bgd. counts: snr = 20.199427
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.135699 pixels
  Position = (480.1, 289.8) = 16 6 9.90 -27 40 49.0
  Extent = 5.4 (4.4-6.4)", rotation angle = 0
  Source counts = 113.5 +/- 12.0
  Background counts = 31.6
  Rate = 0.009 +/- 0.0009
[Fri Oct 28 12:39:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:39:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:39:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:39:51 2011] Source does appear to be extended
[Fri Oct 28 12:39:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:40:20 2011] Not overwriting source region fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 12:40:20 2011] Extracting stamp from image fullrun_ccd3_acisf06398_pi14-548_cl_sm2.00.img.gz, (233, 43) - (727, 537)
[Fri Oct 28 12:40:20 2011] Writing fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 12:40:20 2011] ../../acisf06398/products/events/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.evt and ../../acisf06398/products/events/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Fri Oct 28 12:40:20 2011] Size of ../../acisf06398/products/events/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.evt.gz[events] = 141 counts
[Fri Oct 28 12:40:20 2011] Mean chipx,y = (444.48, 754.13)
[Fri Oct 28 12:40:20 2011] Mean tdetx,y = (4377.87, 3505.48)
[Fri Oct 28 12:40:20 2011] chipx,y range = (402.00-479.00, 721.00-793.00)
[Fri Oct 28 12:40:20 2011] Size of ../../acisf06398/products/events/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 265 counts
[Fri Oct 28 12:40:20 2011] ../../acisf06398/products/images/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.img and ../../acisf06398/products/images/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Fri Oct 28 12:40:20 2011] ../../acisf06398/products/spectra/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.pi and ../../acisf06398/products/spectra/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Fri Oct 28 12:40:23 2011] ../../acisf06398/products/lightcurves/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.lc and ../../acisf06398/products/lightcurves/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Fri Oct 28 12:40:32 2011] Keeping rmf generated by specextract
[Fri Oct 28 12:40:32 2011] 160.671
[Fri Oct 28 12:41:40 2011] Updating aperture counts using extracted products
[Fri Oct 28 12:41:40 2011] Error reading totcts from fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 12:41:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:41:40 2011] Using photon index=1.80, rate=0.00888, arf fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 12:41:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:41:40 2011] Updating source flux to 1.2e-13
[Fri Oct 28 12:41:49 2011] Reading fit data from acisf06398/analysis//spectral/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_pl.csv
[Fri Oct 28 12:41:49 2011] Spectral fit parameter nH value = 8.57287e+21
[Fri Oct 28 12:41:49 2011] Spectral fit parameter PhoIndex value = 1.81877
[Fri Oct 28 12:41:49 2011] Failed to get F(0.3-8.0) from acisf06398/analysis//spectral/fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 12:41:49 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:41:49 2011] Using Nh = 8.6e+21, photon index=1.82, rate=0.00888, arf fullrun_ccd3_acisf06398_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 12:41:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:41:49 2011] Updating source flux to 1.5e-13