[Sun Oct  2 02:05:40 2011] Detection parameters:
  Position = (178.5, 1081.1) = 1 34 32.97 30 38 57.1
  Extent = 0.5" x 0.5", rotation angle = 52 degrees
  Source counts = 43.7 +/- 6.8
  Background counts = 2.3
  Rate = 0.0004 +/- 7e-05

[Sun Oct  2 02:05:43 2011] Off-axis axis estimate = 0.13'
[Sun Oct  2 03:41:32 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 03:41:32 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sun Oct  2 03:41:32 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.824
[Sun Oct  2 03:41:32 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.42"
[Sun Oct  2 04:26:40 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13.ximg exists
[Sun Oct  2 04:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13.csv
[Sun Oct  2 04:26:40 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13_1.ximg exists
[Sun Oct  2 04:26:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13.csv
[Sun Oct  2 04:26:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06388_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 04:26:40 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sun Oct  2 04:26:40 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Oct  2 04:26:40 2011] Fit fullrun_ccd3_acisf06388_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Oct  2 06:13:29 2011] Spatial fit model total counts = 51.263000, observed total counts = 51.000000
[Sun Oct  2 06:13:29 2011] Offset between fit and detection position for source 13 = 0.853229 pixels
[Sun Oct  2 06:13:29 2011] 50.996760 total counts/ 7.307460 bgd. counts: snr = 16.161879
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.853229 pixels
  Position = (179.1, 1081.7) = 1 34 32.96 30 38 57.2
  Extent = 0.4 (0.4-0.6)", rotation angle = 0
  Source counts = 43.7 +/- 7.1
  Background counts = 7.3
  Rate = 0.0004 +/- 7e-05
[Sun Oct  2 06:13:29 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 06:13:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 06:13:29 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 06:13:29 2011] Source does appear to be extended
[Sun Oct  2 06:13:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 07:27:02 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 07:27:02 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sun Oct  2 07:27:02 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.127
[Sun Oct  2 07:27:02 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.45"
[Sun Oct  2 08:06:59 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13.ximg exists
[Sun Oct  2 08:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13.csv
[Sun Oct  2 08:06:59 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13_1.ximg exists
[Sun Oct  2 08:06:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13.csv
[Sun Oct  2 08:06:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06388_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:06:59 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sun Oct  2 08:06:59 2011] fullrun_ccd3_acisf06388_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sun Oct  2 08:06:59 2011] Fit fullrun_ccd3_acisf06388_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sun Oct  2 09:43:20 2011] Spatial fit model total counts = 48.779600, observed total counts = 50.000000
[Sun Oct  2 09:43:20 2011] Offset between fit and detection position for source 13 = 0.011195 pixels
[Sun Oct  2 09:43:20 2011] 48.434920 total counts/ 6.091920 bgd. counts: snr = 17.155545
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.011195 pixels
  Position = (179.1, 1081.7) = 1 34 32.96 30 38 57.2
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 42.3 +/- 7.0
  Background counts = 6.1
  Rate = 0.0004 +/- 7e-05
[Sun Oct  2 09:43:20 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:43:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:43:20 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:43:20 2011] Source does appear to be extended
[Sun Oct  2 09:43:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:58:52 2011] Writing source region out to fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_src.reg
[Sun Oct  2 09:58:52 2011] Extracting stamp from image fullrun_ccd3_acisf06388_pi14-548_cl_sm2.00.img.gz, (158, 1061) - (200, 1102)
[Sun Oct  2 09:58:52 2011] Writing fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13.gif
[Sun Oct  2 10:01:07 2011] Size of ../../acisf06388/products/events/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_src.evt.gz[events] = 45 counts
[Sun Oct  2 10:01:07 2011] Mean chipx,y = (943.16, 1004.07)
[Sun Oct  2 10:01:07 2011] Mean tdetx,y = (4127.93, 4004.16)
[Sun Oct  2 10:01:07 2011] chipx,y range = (926.00-961.00, 986.00-1020.00)
[Sun Oct  2 10:01:07 2011] Size of ../../acisf06388/products/events/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 17 counts
[Sun Oct  2 10:01:08 2011] Not generating rmf since there are only 42 counts
[Sun Oct  2 10:01:08 2011] arf not found, will run specextract
[Sun Oct  2 10:01:10 2011] ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_bkg.pi not found
[Sun Oct  2 10:01:10 2011] ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13.warf not found
[Sun Oct  2 10:01:10 2011] ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13.wrmf not found
[Sun Oct  2 10:01:10 2011] Removal of ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13.soff failed
[Sun Oct  2 10:01:10 2011] Failed to rename ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_grp.pi to ../../acisf06388/products/spectra/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_src.pi
[Sun Oct  2 10:08:14 2011] No arf file found
[Sun Oct  2 10:11:11 2011] Updating aperture counts using extracted products
[Sun Oct  2 10:11:11 2011] Error reading totcts from fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_src.pi
[Sun Oct  2 10:11:11 2011] No arf file for this source, not re-computing flux
[Sun Oct  2 10:11:19 2011] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 10:11:20 2011] acisf06388/analysis//spectral/fullrun_ccd3_acisf06388_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete