[Sun Oct  2 02:05:30 2011] Detection parameters:
  Position = (719.0, 476.8) = 1 34 48.36 30 43 13.8
  Extent = 0.5" x 0.5", rotation angle = 180 degrees
  Source counts = 19.4 +/- 4.8
  Background counts = 3.6
  Rate = 0.0002 +/- 5e-05

[Sun Oct  2 02:05:31 2011] Off-axis axis estimate = 5.29'
[Sun Oct  2 02:09:30 2011] Using EEF radius (= 1.30 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 02:09:30 2011] Initial guess for spatial extent in simple fitting = 1.30"
[Sun Oct  2 02:09:30 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.911
[Sun Oct  2 02:09:30 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.30"
[Sun Oct  2 02:41:15 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct  2 02:41:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 02:41:15 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct  2 02:41:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 02:41:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06388_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 02:41:15 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  2 02:41:15 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  2 02:41:15 2011] Fit fullrun_ccd0_acisf06388_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct  2 06:13:03 2011] Spatial fit model total counts = 25.589200, observed total counts = 26.000000
[Sun Oct  2 06:13:03 2011] Offset between fit and detection position for source 10 = 1.206164 pixels
[Sun Oct  2 06:13:03 2011] 26.075990 total counts/ 3.653290 bgd. counts: snr = 11.731292
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.206164 pixels
  Position = (719.1, 475.6) = 1 34 48.38 30 43 12.9
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 22.4 +/- 5.1
  Background counts = 3.7
  Rate = 0.0002 +/- 5e-05
[Sun Oct  2 06:13:03 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 06:13:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 06:13:03 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 06:13:03 2011] Source does appear to be extended
[Sun Oct  2 06:13:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 06:14:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  2 06:14:05 2011] Initial guess for spatial extent in simple fitting = 1.15"
[Sun Oct  2 06:14:05 2011] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.926
[Sun Oct  2 06:14:05 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.15"
[Sun Oct  2 06:40:41 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9.ximg exists
[Sun Oct  2 06:40:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9.csv
[Sun Oct  2 06:40:41 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9_1.ximg exists
[Sun Oct  2 06:40:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9.csv
[Sun Oct  2 06:40:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06388_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 06:40:41 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Sun Oct  2 06:40:41 2011] fullrun_ccd0_acisf06388_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Oct  2 06:40:41 2011] Fit fullrun_ccd0_acisf06388_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Oct  2 09:43:10 2011] Spatial fit model total counts = 23.747200, observed total counts = 24.000000
[Sun Oct  2 09:43:10 2011] Offset between fit and detection position for source 10 = 0.123216 pixels
[Sun Oct  2 09:43:10 2011] 23.888550 total counts/ 1.462450 bgd. counts: snr = 18.544419
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.123216 pixels
  Position = (719.1, 475.8) = 1 34 48.38 30 43 13.0
  Extent = 1.2 (0.8-1.6)", rotation angle = 0
  Source counts = 22.4 +/- 4.9
  Background counts = 1.5
  Rate = 0.0002 +/- 5e-05
[Sun Oct  2 09:43:10 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 09:43:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 09:43:10 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 09:43:10 2011] Source does appear to be extended
[Sun Oct  2 09:43:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 09:43:46 2011] Writing source region out to fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_src.reg
[Sun Oct  2 09:43:46 2011] Extracting stamp from image fullrun_ccd0_acisf06388_pi14-548_cl_sm2.00.img.gz, (665, 421) - (774, 530)
[Sun Oct  2 09:43:46 2011] Writing fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10.gif
[Sun Oct  2 09:45:47 2011] Size of ../../acisf06388/products/events/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_src.evt.gz[events] = 28 counts
[Sun Oct  2 09:45:47 2011] Mean chipx,y = (679.93, 581.64)
[Sun Oct  2 09:45:47 2011] Mean tdetx,y = (3642.64, 4452.07)
[Sun Oct  2 09:45:47 2011] chipx,y range = (662.00-696.00, 565.00-600.00)
[Sun Oct  2 09:45:47 2011] Size of ../../acisf06388/products/events/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 100 counts
[Sun Oct  2 09:45:48 2011] Not generating rmf since there are only 22 counts
[Sun Oct  2 09:45:48 2011] arf not found, will run specextract
[Sun Oct  2 09:45:50 2011] ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_bkg.pi not found
[Sun Oct  2 09:45:50 2011] ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10.warf not found
[Sun Oct  2 09:45:50 2011] ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10.wrmf not found
[Sun Oct  2 09:45:50 2011] Removal of ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10.soff failed
[Sun Oct  2 09:45:50 2011] Failed to rename ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_grp.pi to ../../acisf06388/products/spectra/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_src.pi
[Sun Oct  2 09:48:25 2011] No arf file found
[Sun Oct  2 10:11:10 2011] Updating aperture counts using extracted products
[Sun Oct  2 10:11:10 2011] Error reading totcts from fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_src.pi
[Sun Oct  2 10:11:10 2011] No arf file for this source, not re-computing flux
[Sun Oct  2 10:11:16 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct  2 10:11:17 2011] acisf06388/analysis//spectral/fullrun_ccd0_acisf06388_pi14-548_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete