[Wed Oct 26 21:45:32 2011] Detection parameters:
  Position = (855.2, 343.0) = 1 33 23.94 30 35 17.4
  Extent = 0.7" x 0.5", rotation angle = 108 degrees
  Source counts = 213.7 +/- 14.8
  Background counts = 6.3
  Rate = 0.002 +/- 0.0002

[Wed Oct 26 21:45:36 2011] Off-axis axis estimate = 3.68'
[Wed Oct 26 21:50:01 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 21:50:01 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Wed Oct 26 21:50:01 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.996
[Wed Oct 26 21:50:01 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.74"
[Wed Oct 26 22:26:31 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5.ximg exists
[Wed Oct 26 22:26:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 22:26:31 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Oct 26 22:26:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5.csv
[Wed Oct 26 22:26:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06385_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 22:26:31 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Oct 26 22:26:31 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Oct 26 22:26:31 2011] Fit fullrun_ccd0_acisf06385_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Oct 27 00:50:50 2011] Source 7 is offset by 6.258042 and 5.986069 pixels which is larger than
2 X fitted extent = 0.751919 x 0.751919, not incorporating fit results
[Thu Oct 27 00:50:50 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 00:50:50 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 00:50:50 2011] Assessing source extent using major
[Thu Oct 27 00:50:50 2011] Source does appear to be extended
[Thu Oct 27 00:50:50 2011] Computing asymmetry using major and minor axis, asym = 1.39
[Thu Oct 27 00:51:27 2011] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 00:51:27 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Thu Oct 27 00:51:27 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.996
[Thu Oct 27 00:51:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.74"
[Thu Oct 27 01:32:55 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5.ximg exists
[Thu Oct 27 01:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5.csv
[Thu Oct 27 01:32:55 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5_1.ximg exists
[Thu Oct 27 01:32:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5.csv
[Thu Oct 27 01:32:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06385_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:32:55 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Thu Oct 27 01:32:55 2011] fullrun_ccd0_acisf06385_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Oct 27 01:32:55 2011] Fit fullrun_ccd0_acisf06385_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Oct 27 03:36:21 2011] Spatial fit model total counts = 219.456000, observed total counts = 220.000000
[Thu Oct 27 03:36:21 2011] Offset between fit and detection position for source 7 = 0.698558 pixels
[Thu Oct 27 03:36:21 2011] 219.304400 total counts/ 12.108400 bgd. counts: snr = 59.543997
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.698558 pixels
  Position = (855.7, 343.5) = 1 33 23.95 30 35 17.4
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 207.2 +/- 14.8
  Background counts = 12.1
  Rate = 0.002 +/- 0.0002
[Thu Oct 27 03:36:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 03:36:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 03:36:21 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 03:36:21 2011] Source does appear to be extended
[Thu Oct 27 03:36:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 03:36:52 2011] Writing source region out to fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_src.reg
[Thu Oct 27 03:36:52 2011] Extracting stamp from image fullrun_ccd0_acisf06385_pi14-548_cl_sm2.00.img.gz, (818, 306) - (893, 381)
[Thu Oct 27 03:36:52 2011] Writing fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7.gif
[Thu Oct 27 03:37:36 2011] Size of ../../acisf06385/products/events/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_src.evt.gz[events] = 216 counts
[Thu Oct 27 03:37:36 2011] Mean chipx,y = (856.66, 684.19)
[Thu Oct 27 03:37:36 2011] Mean tdetx,y = (3745.19, 4275.34)
[Thu Oct 27 03:37:36 2011] chipx,y range = (838.00-877.00, 665.00-704.00)
[Thu Oct 27 03:37:36 2011] Size of ../../acisf06385/products/events/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 46 counts
[Thu Oct 27 03:37:37 2011] rmf not found, will run specextract
[Thu Oct 27 03:37:37 2011] arf not found, will run specextract
[Thu Oct 27 03:37:39 2011] ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_bkg.pi not found
[Thu Oct 27 03:37:39 2011] ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7.warf not found
[Thu Oct 27 03:37:39 2011] ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7.wrmf not found
[Thu Oct 27 03:37:39 2011] Removal of ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7.soff failed
[Thu Oct 27 03:37:39 2011] Failed to rename ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_grp.pi to ../../acisf06385/products/spectra/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_src.pi
[Thu Oct 27 03:40:55 2011] No arf file found
[Thu Oct 27 03:52:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 03:52:53 2011] Error reading totcts from fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_src.pi
[Thu Oct 27 03:52:53 2011] No arf file for this source, not re-computing flux
[Thu Oct 27 03:52:58 2011] Flag b found in src. 7 procflags, skipping spectral fitting
[Thu Oct 27 03:52:58 2011] Source 7 has no response, skipping
[Thu Oct 27 03:52:59 2011] acisf06385/analysis//spectral/fullrun_ccd0_acisf06385_pi14-548_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete