[Thu Feb 23 03:27:19 2012] Detection parameters:
  Position = (1038.7, 779.8) = 1 33 24.41 30 44 2.4
  Extent = 1.0" x 0.6", rotation angle = 24 degrees
  Source counts = 6400.2 +/- 80.6
  Background counts = 95.8
  Rate = 0.07 +/- 0.0009

[Thu Feb 23 03:27:23 2012] Off-axis axis estimate = 5.25'
[Thu Feb 23 04:54:25 2012] Using EEF radius (= 1.28 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 04:54:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 04:54:25 2012] Initial guess for spatial extent in simple fitting = 1.28"
[Thu Feb 23 04:54:25 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.933
[Thu Feb 23 04:54:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.28"
[Thu Feb 23 05:38:05 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1.ximg exists
[Thu Feb 23 05:38:05 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1.csv
[Thu Feb 23 05:38:05 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Feb 23 05:38:05 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1.csv
[Thu Feb 23 05:38:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06380_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 05:38:05 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Feb 23 05:38:05 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Feb 23 05:38:05 2012] Fit fullrun_ccd3_acisf06380_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Feb 23 06:12:01 2012] Spatial fit model total counts = 6483.830000, observed total counts = 6484.000000
[Thu Feb 23 06:12:01 2012] Offset between fit and detection position for source 2 = 0.767098 pixels
[Thu Feb 23 06:12:01 2012] 6477.825000 total counts/ 208.635000 bgd. counts: snr = 434.028101
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.767098 pixels
  Position = (1039.3, 780.3) = 1 33 24.41 30 44 2.4
  Extent = 1.3 (1.3-1.3)", rotation angle = 0
  Source counts = 6269.2 +/- 80.5
  Background counts = 208.6
  Rate = 0.07 +/- 0.0009
[Thu Feb 23 06:12:01 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:12:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:12:01 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:12:01 2012] Source does appear to be extended
[Thu Feb 23 06:12:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:27:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:27:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 07:27:13 2012] Initial guess for spatial extent in simple fitting = 1.25"
[Thu Feb 23 07:27:13 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Thu Feb 23 07:27:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.25"
[Thu Feb 23 08:01:26 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1.ximg exists
[Thu Feb 23 08:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1.csv
[Thu Feb 23 08:01:26 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Feb 23 08:01:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1.csv
[Thu Feb 23 08:01:26 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06380_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 08:01:26 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Feb 23 08:01:26 2012] fullrun_ccd3_acisf06380_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Feb 23 08:01:26 2012] Fit fullrun_ccd3_acisf06380_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Feb 23 08:53:09 2012] Spatial fit model total counts = 6426.530000, observed total counts = 6466.000000
[Thu Feb 23 08:53:09 2012] Offset between fit and detection position for source 2 = 0.042125 pixels
[Thu Feb 23 08:53:09 2012] 6413.247600 total counts/ 26.847600 bgd. counts: snr = 1232.546696
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.042125 pixels
  Position = (1039.3, 780.4) = 1 33 24.41 30 44 2.4
  Extent = 1.3 (1.3-1.3)", rotation angle = 0
  Source counts = 6386.4 +/- 80.1
  Background counts = 26.8
  Rate = 0.07 +/- 0.0009
[Thu Feb 23 08:53:09 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:53:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:53:09 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:53:09 2012] Source does appear to be extended
[Thu Feb 23 08:53:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 09:07:26 2012] Writing source region out to fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_src.reg
[Thu Feb 23 09:07:26 2012] Extracting stamp from image fullrun_ccd3_acisf06380_pi14-548_cl_sm2.00.img.gz, (978, 719) - (1101, 842)
[Thu Feb 23 09:07:26 2012] Writing fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2.gif
[Thu Feb 23 09:07:29 2012] Size of ../../acisf06380/products/events/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_src.evt.gz[events] = 6459 counts
[Thu Feb 23 09:07:29 2012] Mean chipx,y = (354.50, 805.13)
[Thu Feb 23 09:07:29 2012] Mean tdetx,y = (4326.87, 3415.50)
[Thu Feb 23 09:07:29 2012] chipx,y range = (330.00-385.00, 779.00-832.00)
[Thu Feb 23 09:07:29 2012] Size of ../../acisf06380/products/events/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 163 counts
[Thu Feb 23 09:07:30 2012] rmf not found, will run specextract
[Thu Feb 23 09:07:30 2012] arf not found, will run specextract
[Thu Feb 23 09:07:32 2012] ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_bkg.pi not found
[Thu Feb 23 09:07:32 2012] ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2.warf not found
[Thu Feb 23 09:07:32 2012] ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2.wrmf not found
[Thu Feb 23 09:07:32 2012] Removal of ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2.soff failed
[Thu Feb 23 09:07:32 2012] Failed to rename ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_grp.pi to ../../acisf06380/products/spectra/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_src.pi
[Thu Feb 23 09:13:03 2012] No arf file found
[Thu Feb 23 09:14:42 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:14:42 2012] Error reading totcts from fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_src.pi
[Thu Feb 23 09:14:42 2012] No arf file for this source, not re-computing flux
[Thu Feb 23 09:14:51 2012] Source 2 has no response, skipping
[Thu Feb 23 09:14:52 2012] acisf06380/analysis//spectral/fullrun_ccd3_acisf06380_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete