[Thu Feb 23 03:27:15 2012] Detection parameters:
  Position = (391.3, 1090.7) = 1 33 19.10 30 52 4.5
  Extent = 0.6" x 0.5", rotation angle = 73 degrees
  Source counts = 25.7 +/- 5.3
  Background counts = 2.3
  Rate = 0.0003 +/- 6e-05

[Thu Feb 23 03:27:17 2012] Off-axis axis estimate = 4.38'
[Thu Feb 23 04:34:53 2012] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 04:34:53 2012] Initial guess for spatial extent in simple fitting = 0.95"
[Thu Feb 23 04:34:53 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.057
[Thu Feb 23 04:34:53 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.95"
[Thu Feb 23 04:54:25 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10.ximg exists
[Thu Feb 23 04:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10.csv
[Thu Feb 23 04:54:25 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Feb 23 04:54:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10.csv
[Thu Feb 23 04:54:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06380_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 04:54:25 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Feb 23 04:54:25 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Feb 23 04:54:25 2012] Fit fullrun_ccd2_acisf06380_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Feb 23 06:11:57 2012] Spatial fit model total counts = 39.759100, observed total counts = 39.000000
[Thu Feb 23 06:11:57 2012] Offset between fit and detection position for source 9 = 1.597793 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.597793 pixels
  Position = (391.8, 1092.2) = 1 33 19.10 30 52 5.0
  Extent = 1.1 (0.9-1.3)", rotation angle = 0
  Source counts = 39.2 +/- 6.3
  Background counts = 0.0
  Rate = 0.0004 +/- 7e-05
[Thu Feb 23 06:11:57 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 06:11:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 06:11:57 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 06:11:57 2012] Source does appear to be extended
[Thu Feb 23 06:11:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 07:08:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Feb 23 07:08:48 2012] Initial guess for spatial extent in simple fitting = 1.13"
[Thu Feb 23 07:08:48 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.026
[Thu Feb 23 07:08:48 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.13"
[Thu Feb 23 07:27:13 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10.ximg exists
[Thu Feb 23 07:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10.csv
[Thu Feb 23 07:27:13 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Feb 23 07:27:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10.csv
[Thu Feb 23 07:27:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06380_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 07:27:13 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Feb 23 07:27:13 2012] fullrun_ccd2_acisf06380_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Feb 23 07:27:13 2012] Fit fullrun_ccd2_acisf06380_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Feb 23 08:53:05 2012] Spatial fit model total counts = 40.974300, observed total counts = 41.000000
[Thu Feb 23 08:53:05 2012] Offset between fit and detection position for source 9 = 0.086944 pixels
[Thu Feb 23 08:53:05 2012] 40.762790 total counts/ 6.085490 bgd. counts: snr = 14.057157
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.086944 pixels
  Position = (391.7, 1092.2) = 1 33 19.11 30 52 5.0
  Extent = 1.0 (0.8-1.4)", rotation angle = 0
  Source counts = 34.7 +/- 6.4
  Background counts = 6.1
  Rate = 0.0004 +/- 7e-05
[Thu Feb 23 08:53:05 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 08:53:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 08:53:05 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 08:53:05 2012] Source does appear to be extended
[Thu Feb 23 08:53:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Feb 23 09:01:42 2012] Writing source region out to fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_src.reg
[Thu Feb 23 09:01:42 2012] Extracting stamp from image fullrun_ccd2_acisf06380_pi14-548_cl_sm2.00.img.gz, (344, 1045) - (439, 1140)
[Thu Feb 23 09:01:42 2012] Writing fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9.gif
[Thu Feb 23 09:03:26 2012] Size of ../../acisf06380/products/events/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_src.evt.gz[events] = 40 counts
[Thu Feb 23 09:03:26 2012] Mean chipx,y = (12.90, 533.00)
[Thu Feb 23 09:03:26 2012] Mean tdetx,y = (3594.00, 4073.10)
[Thu Feb 23 09:03:26 2012] chipx,y range = (2.00-21.00, 513.00-549.00)
[Thu Feb 23 09:03:26 2012] Size of ../../acisf06380/products/events/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 25 counts
[Thu Feb 23 09:03:27 2012] Not generating rmf since there are only 34 counts
[Thu Feb 23 09:03:27 2012] arf not found, will run specextract
[Thu Feb 23 09:03:29 2012] ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_bkg.pi not found
[Thu Feb 23 09:03:29 2012] ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9.warf not found
[Thu Feb 23 09:03:29 2012] ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9.wrmf not found
[Thu Feb 23 09:03:29 2012] Removal of ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9.soff failed
[Thu Feb 23 09:03:29 2012] Failed to rename ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_grp.pi to ../../acisf06380/products/spectra/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_src.pi
[Thu Feb 23 09:07:26 2012] No arf file found
[Thu Feb 23 09:14:41 2012] Updating aperture counts using extracted products
[Thu Feb 23 09:14:41 2012] Error reading totcts from fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_src.pi
[Thu Feb 23 09:14:42 2012] No arf file for this source, not re-computing flux
[Thu Feb 23 09:14:49 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Feb 23 09:14:51 2012] acisf06380/analysis//spectral/fullrun_ccd2_acisf06380_pi14-548_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete