[Sun Oct  2 01:07:01 2011] Detection parameters:
  Position = (738.3, 914.3) = 1 33 53.70 30 36 5.3
  Extent = 0.7" x 0.5", rotation angle = 4 degrees
  Source counts = 11.0 +/- 3.6
  Background counts = 2.0
  Rate = 0.0001 +/- 4e-05

[Sun Oct  2 01:07:04 2011] Off-axis axis estimate = 3.85'
[Sun Oct  2 02:43:13 2011] Using EEF radius (= 0.78 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 02:43:13 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Sun Oct  2 02:43:13 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.911
[Sun Oct  2 02:43:13 2011] Giving source the simple spatial ID 92 for pass 0, mean size = 0.78"
[Sun Oct  2 06:31:35 2011] fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92.ximg exists
[Sun Oct  2 06:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92.csv
[Sun Oct  2 06:31:35 2011] fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92_1.ximg exists
[Sun Oct  2 06:31:35 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92.csv
[Sun Oct  2 06:31:35 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06377_pi14-548_cl_pass0_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 06:31:38 2011] fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92.ximg exists
[Sun Oct  2 06:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92.csv
[Sun Oct  2 06:31:38 2011] fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92_1.ximg exists
[Sun Oct  2 06:31:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92.csv
[Sun Oct  2 06:31:38 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06377_pi14-548_cl_pass0_tfrozen_src92.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 08:49:00 2011] Spatial fit model total counts = 13.152800, observed total counts = 15.000000
[Sun Oct  2 08:49:00 2011] Offset between fit and detection position for source 75 = 0.826484 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.826484 pixels
  Position = (738.9, 914.7) = 1 33 53.69 30 36 5.3
  Extent = 0.7 (0.5-0.9)", rotation angle = 0
  Source counts = 13.1 +/- 3.6
  Background counts = 0.0
  Rate = 0.0001 +/- 4e-05
[Sun Oct  2 08:49:00 2011] Vigneting correction estimate = 1.000000
[Sun Oct  2 08:49:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  2 08:49:00 2011] Assessing source extent using major axis lower bound
[Sun Oct  2 08:49:00 2011] Source does appear to be extended
[Sun Oct  2 08:49:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  2 08:49:00 2011] Deleting source due to low Poisson probability 0.9