[Sun Oct 23 04:02:48 2011] Detection parameters:
  Position = (734.4, 246.5) = 16 26 23.37 -24 20 59.9
  Extent = 0.8" x 0.6", rotation angle = 88 degrees
  Source counts = 1086.3 +/- 33.2
  Background counts = 16.7
  Rate = 0.01 +/- 0.0003

[Sun Oct 23 04:02:50 2011] Off-axis axis estimate = 3.49'
[Sun Oct 23 04:05:12 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:05:12 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Sun Oct 23 04:05:12 2011] source mask rpix=1.4, npix_max = 14, mask sum = 9, frac = 0.623
[Sun Oct 23 04:05:12 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.69"
[Sun Oct 23 04:05:13 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3.ximg exists
[Sun Oct 23 04:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3.csv
[Sun Oct 23 04:05:13 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3_1.ximg exists
[Sun Oct 23 04:05:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3.csv
[Sun Oct 23 04:05:13 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00637_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:05:15 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Sun Oct 23 04:05:15 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Oct 23 04:05:15 2011] Fit fullrun_ccd2_acisf00637_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Oct 23 04:05:43 2011] Spatial fit model total counts = 1104.000000, observed total counts = 1104.000000
[Sun Oct 23 04:05:43 2011] Offset between fit and detection position for source 12 = 0.849162 pixels
[Sun Oct 23 04:05:43 2011] 1102.251000 total counts/ 113.777000 bgd. counts: snr = 92.669754
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.849162 pixels
  Position = (734.9, 247.2) = 16 26 23.37 -24 20 59.8
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 988.5 +/- 33.2
  Background counts = 113.8
  Rate = 0.01 +/- 0.0003
[Sun Oct 23 04:05:43 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:05:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:05:43 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:05:43 2011] Source does appear to be extended
[Sun Oct 23 04:05:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:06:17 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 23 04:06:17 2011] Initial guess for spatial extent in simple fitting = 0.74"
[Sun Oct 23 04:06:17 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.005
[Sun Oct 23 04:06:17 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.74"
[Sun Oct 23 04:06:18 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3.ximg exists
[Sun Oct 23 04:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3.csv
[Sun Oct 23 04:06:18 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3_1.ximg exists
[Sun Oct 23 04:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3.csv
[Sun Oct 23 04:06:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00637_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 23 04:06:18 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Sun Oct 23 04:06:18 2011] fullrun_ccd2_acisf00637_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Oct 23 04:06:18 2011] Fit fullrun_ccd2_acisf00637_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Oct 23 04:06:36 2011] Spatial fit model total counts = 1100.000000, observed total counts = 1100.000000
[Sun Oct 23 04:06:36 2011] Offset between fit and detection position for source 12 = 0.022966 pixels
[Sun Oct 23 04:06:36 2011] 1094.193000 total counts/ 109.714000 bgd. counts: snr = 93.988654
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.022966 pixels
  Position = (734.9, 247.2) = 16 26 23.37 -24 20 59.8
  Extent = 0.7 (0.7-0.8)", rotation angle = 0
  Source counts = 984.5 +/- 33.1
  Background counts = 109.7
  Rate = 0.01 +/- 0.0003
[Sun Oct 23 04:06:36 2011] Vigneting correction estimate = 1.000000
[Sun Oct 23 04:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 23 04:06:36 2011] Assessing source extent using major axis lower bound
[Sun Oct 23 04:06:36 2011] Source does appear to be extended
[Sun Oct 23 04:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 23 04:08:27 2011] Not overwriting source region fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.reg
[Sun Oct 23 04:08:27 2011] Extracting stamp from image fullrun_ccd2_acisf00637_pi14-548_cl_sm2.00.img.gz, (701, 214) - (768, 281)
[Sun Oct 23 04:08:27 2011] Writing fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12.gif
[Sun Oct 23 04:08:35 2011] ../../acisf00637/products/events/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.evt and ../../acisf00637/products/events/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Oct 23 04:08:35 2011] Size of ../../acisf00637/products/events/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.evt.gz[events] = 1059 counts
[Sun Oct 23 04:08:35 2011] Mean chipx,y = (451.54, 931.13)
[Sun Oct 23 04:08:35 2011] Mean tdetx,y = (3992.13, 3634.46)
[Sun Oct 23 04:08:35 2011] chipx,y range = (430.00-471.00, 908.00-953.00)
[Sun Oct 23 04:08:35 2011] Size of ../../acisf00637/products/events/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 91 counts
[Sun Oct 23 04:08:35 2011] ../../acisf00637/products/images/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.img and ../../acisf00637/products/images/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Oct 23 04:08:35 2011] ../../acisf00637/products/spectra/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.pi and ../../acisf00637/products/spectra/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sun Oct 23 04:08:38 2011] ../../acisf00637/products/lightcurves/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.lc and ../../acisf00637/products/lightcurves/fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Oct 23 04:09:27 2011] Keeping rmf generated by specextract
[Sun Oct 23 04:09:27 2011] 195.484
[Sun Oct 23 04:10:21 2011] Updating aperture counts using extracted products
[Sun Oct 23 04:10:21 2011] Error reading totcts from fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12_src.pi.gz
[Sun Oct 23 04:10:21 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct 23 04:10:21 2011] Using photon index=1.80, rate=0.0102, arf fullrun_ccd2_acisf00637_pi14-548_pass1_cl_src12.arf
[Sun Oct 23 04:10:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Oct 23 04:10:21 2011] Updating source flux to 1.1e-13