[Tue Nov  1 05:19:57 2011] Detection parameters:
  Position = (311.0, 520.7) = 12 59 0.78 -1 45 35.1
  Extent = 1.8" x 1.3", rotation angle = 96 degrees
  Source counts = 22.6 +/- 5.6
  Background counts = 8.4
  Rate = 0.0006 +/- 0.0002

[Tue Nov  1 05:19:58 2011] Off-axis axis estimate = 6.14'
[Tue Nov  1 05:21:19 2011] Using EEF radius (= 1.70 ")to estimate initial spatial extent for simple fitting
[Tue Nov  1 05:21:19 2011] Initial guess for spatial extent in simple fitting = 1.70"
[Tue Nov  1 05:21:19 2011] source mask rpix=3.5, npix_max = 62, mask sum = 64, frac = 1.022
[Tue Nov  1 05:21:19 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 1.70"
[Tue Nov  1 05:21:20 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11.ximg exists
[Tue Nov  1 05:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11.csv
[Tue Nov  1 05:21:20 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Nov  1 05:21:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11.csv
[Tue Nov  1 05:21:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06356_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 05:21:20 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Nov  1 05:21:21 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Nov  1 05:21:21 2011] Fit fullrun_ccd3_acisf06356_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Nov  1 05:21:33 2011] Spatial fit model total counts = 30.820400, observed total counts = 31.000000
[Tue Nov  1 05:21:33 2011] Offset between fit and detection position for source 11 = 0.793568 pixels
[Tue Nov  1 05:21:33 2011] 31.582700 total counts/ 12.237200 bgd. counts: snr = 5.530176
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.793568 pixels
  Position = (311.8, 520.7) = 12 59 0.77 -1 45 35.4
  Extent = 1.3 (0.9-2.0)", rotation angle = 0
  Source counts = 19.3 +/- 5.6
  Background counts = 12.2
  Rate = 0.0005 +/- 0.0002
[Tue Nov  1 05:21:33 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 05:21:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 05:21:33 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 05:21:33 2011] Source does appear to be extended
[Tue Nov  1 05:21:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 05:21:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Nov  1 05:21:53 2011] Initial guess for spatial extent in simple fitting = 1.27"
[Tue Nov  1 05:21:53 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Tue Nov  1 05:21:53 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 1.27"
[Tue Nov  1 05:21:55 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11.ximg exists
[Tue Nov  1 05:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11.csv
[Tue Nov  1 05:21:55 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Nov  1 05:21:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11.csv
[Tue Nov  1 05:21:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06356_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Nov  1 05:21:55 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Nov  1 05:21:55 2011] fullrun_ccd3_acisf06356_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Nov  1 05:21:55 2011] Fit fullrun_ccd3_acisf06356_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Nov  1 05:22:05 2011] Spatial fit model total counts = 26.654900, observed total counts = 27.000000
[Tue Nov  1 05:22:05 2011] Offset between fit and detection position for source 11 = 0.524340 pixels
[Tue Nov  1 05:22:05 2011] 26.954380 total counts/ 4.397880 bgd. counts: snr = 10.755981
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.524340 pixels
  Position = (312.0, 520.2) = 12 59 0.76 -1 45 35.6
  Extent = 1.4 (0.9-2.3)", rotation angle = 0
  Source counts = 22.6 +/- 5.2
  Background counts = 4.4
  Rate = 0.0006 +/- 0.0001
[Tue Nov  1 05:22:05 2011] Vigneting correction estimate = 1.000000
[Tue Nov  1 05:22:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Nov  1 05:22:05 2011] Assessing source extent using major axis lower bound
[Tue Nov  1 05:22:05 2011] Source does appear to be extended
[Tue Nov  1 05:22:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Nov  1 05:24:50 2011] Not overwriting source region fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.reg
[Tue Nov  1 05:24:50 2011] Extracting stamp from image fullrun_ccd3_acisf06356_pi14-548_cl_sm2.00.img.gz, (246, 455) - (377, 586)
[Tue Nov  1 05:24:50 2011] Writing fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11.gif
[Tue Nov  1 05:25:29 2011] ../../acisf06356/products/events/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.evt and ../../acisf06356/products/events/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Tue Nov  1 05:25:29 2011] Size of ../../acisf06356/products/events/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.evt.gz[events] = 33 counts
[Tue Nov  1 05:25:29 2011] Mean chipx,y = (140.03, 520.00)
[Tue Nov  1 05:25:29 2011] Mean tdetx,y = (4612.00, 3201.03)
[Tue Nov  1 05:25:29 2011] chipx,y range = (121.00-164.00, 496.00-545.00)
[Tue Nov  1 05:25:29 2011] Size of ../../acisf06356/products/events/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 127 counts
[Tue Nov  1 05:25:29 2011] ../../acisf06356/products/images/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.img and ../../acisf06356/products/images/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Tue Nov  1 05:25:29 2011] ../../acisf06356/products/spectra/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.pi and ../../acisf06356/products/spectra/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Tue Nov  1 05:25:29 2011] Not generating rmf since there are only 22 counts
[Tue Nov  1 05:25:32 2011] ../../acisf06356/products/lightcurves/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.lc and ../../acisf06356/products/lightcurves/fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Tue Nov  1 05:25:42 2011] 175.852
[Tue Nov  1 05:25:49 2011] Updating aperture counts using extracted products
[Tue Nov  1 05:25:49 2011] Error reading totcts from fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11_src.pi.gz
[Tue Nov  1 05:25:49 2011] Calculating source flux in energy range 0.30-8.00
[Tue Nov  1 05:25:49 2011] Using photon index=1.80, rate=0.000617, arf fullrun_ccd3_acisf06356_pi14-548_pass1_cl_src11.arf
[Tue Nov  1 05:25:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Nov  1 05:25:49 2011] Updating source flux to 8.3e-15
[Tue Nov  1 05:25:58 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting