[Mon Oct 3 03:23:47 2011] Detection parameters: Position = (948.2, 789.2) = 19 10 32.52 9 5 42.8 Extent = 0.7" x 0.5", rotation angle = 67 degrees Source counts = 22.5 +/- 4.9 Background counts = 1.5 Rate = 0.0004 +/- 8e-05 [Mon Oct 3 03:23:52 2011] Off-axis axis estimate = 3.77' [Mon Oct 3 03:25:04 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting [Mon Oct 3 03:25:04 2011] Initial guess for spatial extent in simple fitting = 0.76" [Mon Oct 3 03:25:04 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.949 [Mon Oct 3 03:25:04 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.76" [Mon Oct 3 03:25:05 2011] fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6.ximg exists [Mon Oct 3 03:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6.csv [Mon Oct 3 03:25:05 2011] fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6_1.ximg exists [Mon Oct 3 03:25:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6.csv [Mon Oct 3 03:25:05 2011] It looks like the fit did not converge You should probably delete fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_ccd3_acisf06355_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Oct 3 03:25:05 2011] fullrun_ccd3_acisf06355_pi14-548_cl_pass0_tfrozen_src6.ximg exists [Mon Oct 3 03:25:05 2011] fullrun_ccd3_acisf06355_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists [Mon Oct 3 03:25:05 2011] Fit fullrun_ccd3_acisf06355_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly [Mon Oct 3 03:25:17 2011] Spatial fit model total counts = 25.271700, observed total counts = 25.000000 [Mon Oct 3 03:25:17 2011] Offset between fit and detection position for source 1 = 0.786490 pixels Spatial fit parameters: Offset between fit and detection position for source 1 = 0.786490 pixels Position = (948.7, 789.7) = 19 10 32.51 9 5 42.8 Extent = 0.8 (0.7-1.1)", rotation angle = 0 Source counts = 25.0 +/- 5.0 Background counts = 0.0 Rate = 0.0004 +/- 8e-05 [Mon Oct 3 03:25:17 2011] Vigneting correction estimate = 1.000000 [Mon Oct 3 03:25:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Oct 3 03:25:17 2011] Assessing source extent using major axis lower bound [Mon Oct 3 03:25:17 2011] Source does appear to be extended [Mon Oct 3 03:25:17 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Oct 3 03:25:17 2011] Deleting source due to low Poisson probability 0.9