[Wed Oct  5 09:32:04 2011] Detection parameters:
  Position = (796.6, 817.9) = 5 35 41.26 -5 3 51.8
  Extent = 0.8" x 0.6", rotation angle = 114 degrees
  Source counts = 15.8 +/- 4.2
  Background counts = 2.2
  Rate = 0.0002 +/- 5e-05

[Wed Oct  5 09:32:06 2011] Off-axis axis estimate = 5.45'
[Wed Oct  5 09:34:59 2011] Using EEF radius (= 1.37 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 09:34:59 2011] Initial guess for spatial extent in simple fitting = 1.37"
[Wed Oct  5 09:34:59 2011] source mask rpix=2.8, npix_max = 43, mask sum = 38, frac = 0.879
[Wed Oct  5 09:34:59 2011] Giving source the simple spatial ID 57 for pass 0, mean size = 1.37"
[Wed Oct  5 09:35:04 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57.ximg exists
[Wed Oct  5 09:35:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57.csv
[Wed Oct  5 09:35:04 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57_1.ximg exists
[Wed Oct  5 09:35:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57.csv
[Wed Oct  5 09:35:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00634_pi14-548_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:35:06 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57.ximg exists
[Wed Oct  5 09:35:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57.csv
[Wed Oct  5 09:35:06 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57_1.ximg exists
[Wed Oct  5 09:35:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57.csv
[Wed Oct  5 09:35:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00634_pi14-548_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:36:14 2011] Spatial fit model total counts = 28.195500, observed total counts = 33.000000
[Wed Oct  5 09:36:14 2011] Offset between fit and detection position for source 53 = 0.767261 pixels
[Wed Oct  5 09:36:14 2011] 26.105270 total counts/ 2.728970 bgd. counts: snr = 14.150650
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.767261 pixels
  Position = (797.3, 818.2) = 5 35 41.25 -5 3 51.9
  Extent = 1.1 (0.7-1.4)", rotation angle = 0
  Source counts = 23.4 +/- 5.1
  Background counts = 2.7
  Rate = 0.0003 +/- 6e-05
[Wed Oct  5 09:36:14 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 09:36:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 09:36:14 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 09:36:14 2011] Source does appear to be extended
[Wed Oct  5 09:36:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 09:37:37 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 09:37:37 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Wed Oct  5 09:37:37 2011] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.021
[Wed Oct  5 09:37:37 2011] Giving source the simple spatial ID 56 for pass 1, mean size = 1.13"
[Wed Oct  5 09:37:40 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass1_src56.ximg exists
[Wed Oct  5 09:37:40 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass1_src56_1.ximg exists
[Wed Oct  5 09:37:40 2011] Fit fullrun_ccd2_acisf00634_pi14-548_cl_pass1_src56 appears to have run properly
[Wed Oct  5 09:37:41 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56.ximg exists
[Wed Oct  5 09:37:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56.csv
[Wed Oct  5 09:37:42 2011] fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56_1.ximg exists
[Wed Oct  5 09:37:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56.csv
[Wed Oct  5 09:37:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf00634_pi14-548_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 09:38:40 2011] Spatial fit model total counts = 26.824800, observed total counts = 30.000000
[Wed Oct  5 09:38:40 2011] Offset between fit and detection position for source 53 = 0.076248 pixels
[Wed Oct  5 09:38:40 2011] 25.056040 total counts/ 2.465740 bgd. counts: snr = 14.386275
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 0.076248 pixels
  Position = (797.2, 818.1) = 5 35 41.25 -5 3 51.9
  Extent = 1.1 (0.7-1.6)", rotation angle = 0
  Source counts = 22.6 +/- 5.0
  Background counts = 2.5
  Rate = 0.0003 +/- 6e-05
[Wed Oct  5 09:38:40 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 09:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 09:38:40 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 09:38:40 2011] Source does appear to be extended
[Wed Oct  5 09:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 10:28:34 2011] Not overwriting source region fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.reg
[Wed Oct  5 10:28:34 2011] Extracting stamp from image fullrun_ccd2_acisf00634_pi14-548_cl_sm2.00.img.gz, (746, 767) - (848, 869)
[Wed Oct  5 10:28:34 2011] Writing fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53.gif
[Wed Oct  5 10:48:22 2011] ../../acisf00634/products/events/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.evt and ../../acisf00634/products/events/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_bgd.evt exist, delete to re-create
[Wed Oct  5 10:48:22 2011] Size of ../../acisf00634/products/events/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.evt.gz[events] = 30 counts
[Wed Oct  5 10:48:22 2011] Mean chipx,y = (564.63, 653.27)
[Wed Oct  5 10:48:22 2011] Mean tdetx,y = (3714.27, 3521.37)
[Wed Oct  5 10:48:22 2011] chipx,y range = (544.00-585.00, 636.00-670.00)
[Wed Oct  5 10:48:22 2011] Size of ../../acisf00634/products/events/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_bgd.evt.gz[events] = 62 counts
[Wed Oct  5 10:48:22 2011] ../../acisf00634/products/images/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.img and ../../acisf00634/products/images/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_bgd.img exist, delete to re-create
[Wed Oct  5 10:48:22 2011] Not generating rmf since there are only 22 counts
[Wed Oct  5 10:48:29 2011] ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_bkg.pi not found
[Wed Oct  5 10:48:29 2011] ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53.warf not found
[Wed Oct  5 10:48:29 2011] ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53.wrmf not found
[Wed Oct  5 10:48:29 2011] Removal of ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53.soff failed
[Wed Oct  5 10:48:29 2011] Failed to rename ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_grp.pi to ../../acisf00634/products/spectra/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.pi
[Wed Oct  5 10:48:41 2011] ../../acisf00634/products/lightcurves/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.lc and ../../acisf00634/products/lightcurves/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_bgd.lc exist, delete to re-create
[Wed Oct  5 10:49:36 2011] 169.879
[Wed Oct  5 11:05:36 2011] Updating aperture counts using extracted products
[Wed Oct  5 11:05:36 2011] Error reading totcts from fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_src.pi
[Wed Oct  5 11:05:37 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 11:05:37 2011] Using photon index=1.80, rate=0.000257, arf fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53.arf
[Wed Oct  5 11:05:37 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 11:05:37 2011] Updating source flux to 3e-15
[Wed Oct  5 11:05:51 2011] Source 53 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct  5 11:05:52 2011] acisf00634/analysis//spectral/fullrun_ccd2_acisf00634_pi14-548_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete