[Wed Oct 5 09:31:52 2011] Detection parameters: Position = (298.8, 696.2) = 5 35 40.60 -5 12 18.4 Extent = 2.5" x 1.0", rotation angle = 74 degrees Source counts = 20.4 +/- 5.5 Background counts = 9.6 Rate = 0.0002 +/- 6e-05 [Wed Oct 5 09:31:52 2011] Off-axis axis estimate = 8.23' [Wed Oct 5 09:34:46 2011] Using EEF radius (= 2.99 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 09:34:46 2011] Initial guess for spatial extent in simple fitting = 2.99" [Wed Oct 5 09:34:46 2011] source mask rpix=6.1, npix_max = 173, mask sum = 169, frac = 0.976 [Wed Oct 5 09:34:46 2011] Giving source the simple spatial ID 110 for pass 0, mean size = 2.99" [Wed Oct 5 09:35:51 2011] Vigneting correction estimate = 1.000000 [Wed Oct 5 09:35:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Oct 5 09:35:51 2011] Assessing source extent using major [Wed Oct 5 09:35:51 2011] Source does appear to be extended [Wed Oct 5 09:35:51 2011] Computing asymmetry using major and minor axis, asym = 2.38 [Wed Oct 5 09:35:51 2011] Source is asymmetric [Wed Oct 5 09:37:22 2011] Using EEF radius (= 2.99 ")to estimate initial spatial extent for simple fitting [Wed Oct 5 09:37:22 2011] Initial guess for spatial extent in simple fitting = 2.99" [Wed Oct 5 09:37:22 2011] source mask rpix=6.1, npix_max = 173, mask sum = 169, frac = 0.976 [Wed Oct 5 09:37:22 2011] Giving source the simple spatial ID 98 for pass 1, mean size = 2.99" [Wed Oct 5 09:37:28 2011] fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98.ximg exists [Wed Oct 5 09:37:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98.csv [Wed Oct 5 09:37:28 2011] fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98_1.ximg exists [Wed Oct 5 09:37:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98.csv [Wed Oct 5 09:37:28 2011] It looks like the fit did not converge You should probably delete fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98_1.ximg Either tweak this fit manually starting from fullrun_ccd0_acisf00634_pi14-548_cl_pass1_src98.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Oct 5 09:37:33 2011] fullrun_ccd0_acisf00634_pi14-548_cl_pass1_tfrozen_src98.ximg exists [Wed Oct 5 09:37:33 2011] fullrun_ccd0_acisf00634_pi14-548_cl_pass1_tfrozen_src98_1.ximg exists [Wed Oct 5 09:37:33 2011] Fit fullrun_ccd0_acisf00634_pi14-548_cl_pass1_tfrozen_src98 appears to have run properly [Wed Oct 5 09:38:22 2011] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 118 at 74.489169 pixels away [Wed Oct 5 09:38:22 2011] Spatial fit model total counts = 61.979000, observed total counts = 61.000000 [Wed Oct 5 09:38:22 2011] Offset between fit and detection position for source 118 = 5.045331 pixels Spatial fit parameters: Offset between fit and detection position for source 118 = 5.045331 pixels Position = (294.9, 699.4) = 5 35 40.74 -5 12 17.1 Extent = 4.5 (1.8-5.8)", rotation angle = 0 Source counts = 62.1 +/- 7.9 Background counts = 0.0 Rate = 0.0007 +/- 9e-05 Deleting source due to low signal-to-noise ratio