[Thu Oct 27 01:01:22 2011] Detection parameters:
  Position = (684.2, 450.5) = 20 12 5.63 -56 55 29.3
  Extent = 2.6" x 1.8", rotation angle = 94 degrees
  Source counts = 129.3 +/- 12.9
  Background counts = 36.7
  Rate = 0.003 +/- 0.0003

[Thu Oct 27 01:01:22 2011] Off-axis axis estimate = 7.79'
[Thu Oct 27 01:02:47 2011] Using EEF radius (= 2.69 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:02:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:02:47 2011] Initial guess for spatial extent in simple fitting = 2.69"
[Thu Oct 27 01:02:47 2011] source mask rpix=5.5, npix_max = 142, mask sum = 132, frac = 0.929
[Thu Oct 27 01:02:47 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.69"
[Thu Oct 27 01:02:47 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2.ximg exists
[Thu Oct 27 01:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2.csv
[Thu Oct 27 01:02:47 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Oct 27 01:02:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2.csv
[Thu Oct 27 01:02:47 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06296_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:02:47 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct 27 01:02:47 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct 27 01:02:47 2011] Fit fullrun_ccd3_acisf06296_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct 27 01:02:58 2011] Spatial fit model total counts = 182.000000, observed total counts = 182.000000
[Thu Oct 27 01:02:58 2011] Offset between fit and detection position for source 6 = 1.325851 pixels
[Thu Oct 27 01:02:58 2011] 182.165500 total counts/ 85.989500 bgd. counts: snr = 10.371558
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.325851 pixels
  Position = (684.6, 449.2) = 20 12 5.64 -56 55 30.1
  Extent = 1.8 (1.4-2.3)", rotation angle = 0
  Source counts = 96.2 +/- 13.5
  Background counts = 86.0
  Rate = 0.002 +/- 0.0003
[Thu Oct 27 01:02:58 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:02:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:02:58 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:02:58 2011] Source does appear to be extended
[Thu Oct 27 01:02:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:19 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:03:19 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:03:19 2011] Initial guess for spatial extent in simple fitting = 1.77"
[Thu Oct 27 01:03:19 2011] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.075
[Thu Oct 27 01:03:19 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.77"
[Thu Oct 27 01:03:19 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2.ximg exists
[Thu Oct 27 01:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2.csv
[Thu Oct 27 01:03:19 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Oct 27 01:03:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2.csv
[Thu Oct 27 01:03:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06296_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:19 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct 27 01:03:19 2011] fullrun_ccd3_acisf06296_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct 27 01:03:19 2011] Fit fullrun_ccd3_acisf06296_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct 27 01:03:30 2011] Spatial fit model total counts = 139.000000, observed total counts = 139.000000
[Thu Oct 27 01:03:30 2011] Offset between fit and detection position for source 6 = 0.232804 pixels
[Thu Oct 27 01:03:30 2011] 140.454000 total counts/ 63.784200 bgd. counts: snr = 9.599924
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.232804 pixels
  Position = (684.4, 449.1) = 20 12 5.65 -56 55 30.2
  Extent = 1.5 (1.1-2.0)", rotation angle = 0
  Source counts = 76.7 +/- 11.9
  Background counts = 63.8
  Rate = 0.002 +/- 0.0002
[Thu Oct 27 01:03:30 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:03:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:03:30 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:03:30 2011] Source does appear to be extended
[Thu Oct 27 01:03:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:06:21 2011] Not overwriting source region fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.reg
[Thu Oct 27 01:06:21 2011] Extracting stamp from image fullrun_ccd3_acisf06296_pi14-548_cl_sm2.00.img.gz, (617, 381) - (752, 517)
[Thu Oct 27 01:06:21 2011] Writing fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6.gif
[Thu Oct 27 01:06:24 2011] ../../acisf06296/products/events/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.evt and ../../acisf06296/products/events/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Thu Oct 27 01:06:24 2011] Size of ../../acisf06296/products/events/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.evt.gz[events] = 134 counts
[Thu Oct 27 01:06:24 2011] Mean chipx,y = (719.91, 322.86)
[Thu Oct 27 01:06:24 2011] Mean tdetx,y = (4809.14, 3780.91)
[Thu Oct 27 01:06:24 2011] chipx,y range = (698.00-747.00, 294.00-346.00)
[Thu Oct 27 01:06:24 2011] Size of ../../acisf06296/products/events/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 215 counts
[Thu Oct 27 01:06:24 2011] ../../acisf06296/products/images/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.img and ../../acisf06296/products/images/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Thu Oct 27 01:06:24 2011] ../../acisf06296/products/spectra/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.pi and ../../acisf06296/products/spectra/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Thu Oct 27 01:06:24 2011] Not generating rmf since there are only 76 counts
[Thu Oct 27 01:06:27 2011] ../../acisf06296/products/lightcurves/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.lc and ../../acisf06296/products/lightcurves/fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Thu Oct 27 01:06:39 2011] 169.248
[Thu Oct 27 01:06:54 2011] Updating aperture counts using extracted products
[Thu Oct 27 01:06:54 2011] Error reading totcts from fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6_src.pi.gz
[Thu Oct 27 01:06:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 01:06:54 2011] Using photon index=1.80, rate=0.00155, arf fullrun_ccd3_acisf06296_pi14-548_pass1_cl_src6.arf
[Thu Oct 27 01:06:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 01:06:54 2011] Updating source flux to 2e-14
[Thu Oct 27 01:07:10 2011] Source 6 has fewer than 100.000000 counts, skipping spectral fitting