[Thu Oct 27 01:01:20 2011] Detection parameters:
  Position = (448.4, 352.1) = 20 13 8.62 -57 1 24.5
  Extent = 1.8" x 1.0", rotation angle = 70 degrees
  Source counts = 112.4 +/- 11.1
  Background counts = 11.6
  Rate = 0.002 +/- 0.0002

[Thu Oct 27 01:01:20 2011] Off-axis axis estimate = 7.02'
[Thu Oct 27 01:02:44 2011] Using EEF radius (= 2.19 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:02:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:02:44 2011] Initial guess for spatial extent in simple fitting = 2.19"
[Thu Oct 27 01:02:44 2011] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.016
[Thu Oct 27 01:02:44 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.19"
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1.ximg exists
[Thu Oct 27 01:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Oct 27 01:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1.csv
[Thu Oct 27 01:02:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Oct 27 01:02:45 2011] Fit fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Oct 27 01:02:57 2011] Spatial fit model total counts = 131.998000, observed total counts = 132.000000
[Thu Oct 27 01:02:57 2011] Offset between fit and detection position for source 30 = 0.490232 pixels
[Thu Oct 27 01:02:57 2011] 132.159500 total counts/ 26.454500 bgd. counts: snr = 20.551605
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.490232 pixels
  Position = (448.9, 352.2) = 20 13 8.62 -57 1 24.7
  Extent = 1.4 (1.2-1.7)", rotation angle = 0
  Source counts = 105.7 +/- 11.5
  Background counts = 26.5
  Rate = 0.002 +/- 0.0002
[Thu Oct 27 01:02:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:02:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:02:57 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:02:57 2011] Source does appear to be extended
[Thu Oct 27 01:02:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:03:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:03:16 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Thu Oct 27 01:03:16 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Thu Oct 27 01:03:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.39"
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1.ximg exists
[Thu Oct 27 01:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Oct 27 01:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1.csv
[Thu Oct 27 01:03:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Oct 27 01:03:17 2011] Fit fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Oct 27 01:03:27 2011] Spatial fit model total counts = 120.999000, observed total counts = 121.000000
[Thu Oct 27 01:03:27 2011] Offset between fit and detection position for source 30 = 0.094334 pixels
[Thu Oct 27 01:03:27 2011] 121.508700 total counts/ 26.571700 bgd. counts: snr = 18.417295
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.094334 pixels
  Position = (448.8, 352.1) = 20 13 8.63 -57 1 24.7
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 94.9 +/- 11.0
  Background counts = 26.6
  Rate = 0.002 +/- 0.0002
[Thu Oct 27 01:03:27 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:03:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:03:27 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:03:27 2011] Source does appear to be extended
[Thu Oct 27 01:03:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:04:50 2011] Not overwriting source region fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.reg
[Thu Oct 27 01:04:50 2011] Extracting stamp from image fullrun_ccd1_acisf06296_pi14-548_cl_sm2.00.img.gz, (393, 296) - (504, 408)
[Thu Oct 27 01:04:50 2011] Writing fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30.gif
[Thu Oct 27 01:04:51 2011] ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.evt and ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Thu Oct 27 01:04:51 2011] Size of ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.evt.gz[events] = 114 counts
[Thu Oct 27 01:04:51 2011] Mean chipx,y = (944.57, 400.16)
[Thu Oct 27 01:04:51 2011] Mean tdetx,y = (4731.84, 5051.57)
[Thu Oct 27 01:04:51 2011] chipx,y range = (919.00-969.00, 381.00-428.00)
[Thu Oct 27 01:04:51 2011] Size of ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 65 counts
[Thu Oct 27 01:04:51 2011] ../../acisf06296/products/images/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.img and ../../acisf06296/products/images/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Thu Oct 27 01:04:51 2011] ../../acisf06296/products/spectra/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.pi and ../../acisf06296/products/spectra/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Thu Oct 27 01:04:51 2011] Not generating rmf since there are only 94 counts
[Thu Oct 27 01:04:54 2011] ../../acisf06296/products/lightcurves/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.lc and ../../acisf06296/products/lightcurves/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Thu Oct 27 01:06:13 2011] 175.776
[Thu Oct 27 01:06:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 01:06:53 2011] Error reading totcts from fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_src.pi.gz
[Thu Oct 27 01:06:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 01:06:54 2011] Using photon index=1.80, rate=0.00192, arf fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30.arf
[Thu Oct 27 01:06:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 01:06:54 2011] Updating source flux to 2.6e-14
[Thu Oct 27 01:07:04 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 01:07:06 2011] acisf06296/analysis//spectral/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete