[Thu Oct 27 01:01:20 2011] Detection parameters:
  Position = (612.8, 621.8) = 20 12 58.72 -56 59 11.8
  Extent = 0.7" x 0.5", rotation angle = 53 degrees
  Source counts = 13.9 +/- 4.0
  Background counts = 2.1
  Rate = 0.0003 +/- 8e-05

[Thu Oct 27 01:01:20 2011] Off-axis axis estimate = 4.78'
[Thu Oct 27 01:02:44 2011] Using EEF radius (= 1.10 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:02:44 2011] Initial guess for spatial extent in simple fitting = 1.10"
[Thu Oct 27 01:02:44 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.010
[Thu Oct 27 01:02:44 2011] Giving source the simple spatial ID 23 for pass 0, mean size = 1.10"
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23.ximg exists
[Thu Oct 27 01:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23.csv
[Thu Oct 27 01:02:45 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23_1.ximg exists
[Thu Oct 27 01:02:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23.csv
[Thu Oct 27 01:02:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06296_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:02:46 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Thu Oct 27 01:02:46 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Oct 27 01:02:46 2011] Fit fullrun_ccd1_acisf06296_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Oct 27 01:02:57 2011] Spatial fit model total counts = 22.973400, observed total counts = 23.000000
[Thu Oct 27 01:02:57 2011] Offset between fit and detection position for source 21 = 0.860838 pixels
[Thu Oct 27 01:02:57 2011] 22.636710 total counts/ 8.536510 bgd. counts: snr = 4.825975
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.860838 pixels
  Position = (613.4, 622.4) = 20 12 58.71 -56 59 11.8
  Extent = 0.7 (0.5-1.5)", rotation angle = 0
  Source counts = 14.1 +/- 4.8
  Background counts = 8.5
  Rate = 0.0003 +/- 0.0001
[Thu Oct 27 01:02:57 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:02:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:02:57 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:02:57 2011] Source does appear to be extended
[Thu Oct 27 01:02:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:03:16 2011] Initial guess for spatial extent in simple fitting = 0.71"
[Thu Oct 27 01:03:16 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.068
[Thu Oct 27 01:03:16 2011] Giving source the simple spatial ID 23 for pass 1, mean size = 0.71"
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23.ximg exists
[Thu Oct 27 01:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23.csv
[Thu Oct 27 01:03:17 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23_1.ximg exists
[Thu Oct 27 01:03:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23.csv
[Thu Oct 27 01:03:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06296_pi14-548_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:18 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src23.ximg exists
[Thu Oct 27 01:03:18 2011] fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Oct 27 01:03:18 2011] Fit fullrun_ccd1_acisf06296_pi14-548_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Oct 27 01:03:27 2011] Spatial fit model total counts = 22.996100, observed total counts = 23.000000
[Thu Oct 27 01:03:27 2011] Offset between fit and detection position for source 21 = 0.004379 pixels
[Thu Oct 27 01:03:27 2011] 22.659220 total counts/ 8.537020 bgd. counts: snr = 4.833361
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.004379 pixels
  Position = (613.4, 622.4) = 20 12 58.71 -56 59 11.8
  Extent = 0.7 (0.5-1.4)", rotation angle = 0
  Source counts = 14.1 +/- 4.8
  Background counts = 8.5
  Rate = 0.0003 +/- 0.0001
[Thu Oct 27 01:03:27 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:03:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:03:27 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:03:27 2011] Source does appear to be extended
[Thu Oct 27 01:03:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:04:50 2011] Not overwriting source region fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.reg
[Thu Oct 27 01:04:50 2011] Extracting stamp from image fullrun_ccd1_acisf06296_pi14-548_cl_sm2.00.img.gz, (581, 590) - (646, 655)
[Thu Oct 27 01:04:50 2011] Writing fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21.gif
[Thu Oct 27 01:05:51 2011] ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.evt and ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_bgd.evt exist, delete to re-create
[Thu Oct 27 01:05:51 2011] Size of ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.evt.gz[events] = 18 counts
[Thu Oct 27 01:05:51 2011] Mean chipx,y = (649.39, 512.89)
[Thu Oct 27 01:05:51 2011] Mean tdetx,y = (4619.11, 4756.39)
[Thu Oct 27 01:05:51 2011] chipx,y range = (631.00-664.00, 496.00-531.00)
[Thu Oct 27 01:05:51 2011] Size of ../../acisf06296/products/events/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_bgd.evt.gz[events] = 33 counts
[Thu Oct 27 01:05:52 2011] ../../acisf06296/products/images/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.img and ../../acisf06296/products/images/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_bgd.img exist, delete to re-create
[Thu Oct 27 01:05:52 2011] ../../acisf06296/products/spectra/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.pi and ../../acisf06296/products/spectra/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_bgd.pi exist, delete to re-create
[Thu Oct 27 01:05:52 2011] Not generating rmf since there are only 14 counts
[Thu Oct 27 01:05:54 2011] ../../acisf06296/products/lightcurves/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.lc and ../../acisf06296/products/lightcurves/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_bgd.lc exist, delete to re-create
[Thu Oct 27 01:06:14 2011] 188.201
[Thu Oct 27 01:06:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 01:06:53 2011] Error reading totcts from fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_src.pi.gz
[Thu Oct 27 01:06:54 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 01:06:54 2011] Using photon index=1.80, rate=0.000286, arf fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21.arf
[Thu Oct 27 01:06:54 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 01:06:54 2011] Updating source flux to 3.5e-15
[Thu Oct 27 01:07:04 2011] Source 21 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Oct 27 01:07:06 2011] acisf06296/analysis//spectral/fullrun_ccd1_acisf06296_pi14-548_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete