[Thu Oct 27 01:01:17 2011] Detection parameters:
  Position = (1223.3, 788.1) = 20 13 0.56 -56 51 11.5
  Extent = 1.6" x 0.8", rotation angle = 132 degrees
  Source counts = 33.3 +/- 7.3
  Background counts = 20.7
  Rate = 0.0007 +/- 0.0001

[Thu Oct 27 01:01:18 2011] Off-axis axis estimate = 3.26'
[Thu Oct 27 01:02:42 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:02:42 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Thu Oct 27 01:02:42 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.937
[Thu Oct 27 01:02:42 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.63"
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9.ximg exists
[Thu Oct 27 01:02:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9.csv
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9_1.ximg exists
[Thu Oct 27 01:02:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9.csv
[Thu Oct 27 01:02:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Oct 27 01:02:44 2011] Fit fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Oct 27 01:02:53 2011] Spatial fit model total counts = 66.825900, observed total counts = 66.000000
[Thu Oct 27 01:02:53 2011] Offset between fit and detection position for source 9 = 1.212334 pixels
[Thu Oct 27 01:02:53 2011] 69.336100 total counts/ 43.721300 bgd. counts: snr = 3.873865
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.212334 pixels
  Position = (1224.4, 788.5) = 20 13 0.52 -56 51 11.5
  Extent = 1.0 (0.6-1.5)", rotation angle = 0
  Source counts = 25.6 +/- 8.3
  Background counts = 43.7
  Rate = 0.0005 +/- 0.0002
[Thu Oct 27 01:02:53 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:02:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:02:53 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:02:53 2011] Source does appear to be extended
[Thu Oct 27 01:02:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:03:15 2011] Initial guess for spatial extent in simple fitting = 1.03"
[Thu Oct 27 01:03:15 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.935
[Thu Oct 27 01:03:15 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 1.03"
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9.ximg exists
[Thu Oct 27 01:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9.csv
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9_1.ximg exists
[Thu Oct 27 01:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9.csv
[Thu Oct 27 01:03:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Thu Oct 27 01:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Oct 27 01:03:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9.csv
[Thu Oct 27 01:03:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:24 2011] Warning, spatial fit 9 centroid is now closest to src. 18
[Thu Oct 27 01:03:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:03:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:03:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:03:24 2011] Source does appear to be extended
[Thu Oct 27 01:03:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:45 2011] Not overwriting source region fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.reg
[Thu Oct 27 01:03:45 2011] Extracting stamp from image fullrun_ccd0_acisf06296_pi14-548_cl_sm2.00.img.gz, (1178, 742) - (1271, 835)
[Thu Oct 27 01:03:45 2011] Writing fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9.gif
[Thu Oct 27 01:04:09 2011] ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.evt and ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Thu Oct 27 01:04:09 2011] Size of ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.evt.gz[events] = 63 counts
[Thu Oct 27 01:04:09 2011] Mean chipx,y = (955.73, 768.10)
[Thu Oct 27 01:04:09 2011] Mean tdetx,y = (3829.10, 4176.27)
[Thu Oct 27 01:04:09 2011] chipx,y range = (937.00-976.00, 747.00-791.00)
[Thu Oct 27 01:04:09 2011] Size of ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 377 counts
[Thu Oct 27 01:04:09 2011] ../../acisf06296/products/images/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.img and ../../acisf06296/products/images/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Thu Oct 27 01:04:09 2011] ../../acisf06296/products/spectra/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.pi and ../../acisf06296/products/spectra/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Thu Oct 27 01:04:09 2011] Not generating rmf since there are only 25 counts
[Thu Oct 27 01:04:12 2011] ../../acisf06296/products/lightcurves/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.lc and ../../acisf06296/products/lightcurves/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Thu Oct 27 01:04:49 2011] 195.35
[Thu Oct 27 01:06:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 01:06:53 2011] Error reading totcts from fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9_src.pi.gz
[Thu Oct 27 01:06:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 01:06:53 2011] Using photon index=1.80, rate=0.000519, arf fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src9.arf
[Thu Oct 27 01:06:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 01:06:53 2011] Updating source flux to 5.9e-15
[Thu Oct 27 01:06:56 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting