[Thu Oct 27 01:01:17 2011] Detection parameters:
  Position = (767.1, 592.1) = 20 13 27.94 -56 52 47.7
  Extent = 0.8" x 0.6", rotation angle = 9 degrees
  Source counts = 30.5 +/- 5.9
  Background counts = 4.5
  Rate = 0.0006 +/- 0.0001

[Thu Oct 27 01:01:18 2011] Off-axis axis estimate = 3.88'
[Thu Oct 27 01:02:42 2011] Using EEF radius (= 0.79 ")to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:02:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:02:42 2011] Initial guess for spatial extent in simple fitting = 0.79"
[Thu Oct 27 01:02:42 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.894
[Thu Oct 27 01:02:42 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.79"
[Thu Oct 27 01:02:43 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2.ximg exists
[Thu Oct 27 01:02:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2.csv
[Thu Oct 27 01:02:43 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2_1.ximg exists
[Thu Oct 27 01:02:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2.csv
[Thu Oct 27 01:02:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06296_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Thu Oct 27 01:02:44 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Oct 27 01:02:44 2011] Fit fullrun_ccd0_acisf06296_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Oct 27 01:02:53 2011] Spatial fit model total counts = 39.437300, observed total counts = 40.000000
[Thu Oct 27 01:02:53 2011] Offset between fit and detection position for source 2 = 0.510554 pixels
[Thu Oct 27 01:02:53 2011] 40.519300 total counts/ 11.520700 bgd. counts: snr = 8.543535
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.510554 pixels
  Position = (767.3, 592.6) = 20 13 27.96 -56 52 47.7
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 29.0 +/- 6.4
  Background counts = 11.5
  Rate = 0.0006 +/- 0.0001
[Thu Oct 27 01:02:53 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:02:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:02:53 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:02:53 2011] Source does appear to be extended
[Thu Oct 27 01:02:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct 27 01:03:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Oct 27 01:03:15 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Thu Oct 27 01:03:15 2011] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.934
[Thu Oct 27 01:03:15 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.77"
[Thu Oct 27 01:03:15 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2.ximg exists
[Thu Oct 27 01:03:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2.csv
[Thu Oct 27 01:03:15 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2_1.ximg exists
[Thu Oct 27 01:03:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2.csv
[Thu Oct 27 01:03:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06296_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Thu Oct 27 01:03:16 2011] fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Oct 27 01:03:16 2011] Fit fullrun_ccd0_acisf06296_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Thu Oct 27 01:03:24 2011] Spatial fit model total counts = 39.742700, observed total counts = 40.000000
[Thu Oct 27 01:03:24 2011] Offset between fit and detection position for source 2 = 0.005605 pixels
[Thu Oct 27 01:03:24 2011] 40.934000 total counts/ 11.286100 bgd. counts: snr = 8.825148
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.005605 pixels
  Position = (767.3, 592.6) = 20 13 27.96 -56 52 47.7
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 29.6 +/- 6.4
  Background counts = 11.3
  Rate = 0.0006 +/- 0.0001
[Thu Oct 27 01:03:24 2011] Vigneting correction estimate = 1.000000
[Thu Oct 27 01:03:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct 27 01:03:24 2011] Assessing source extent using major axis lower bound
[Thu Oct 27 01:03:24 2011] Source does appear to be extended
[Thu Oct 27 01:03:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct 27 01:03:45 2011] Not overwriting source region fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.reg
[Thu Oct 27 01:03:45 2011] Extracting stamp from image fullrun_ccd0_acisf06296_pi14-548_cl_sm2.00.img.gz, (731, 556) - (803, 629)
[Thu Oct 27 01:03:45 2011] Writing fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2.gif
[Thu Oct 27 01:03:49 2011] ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.evt and ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Thu Oct 27 01:03:49 2011] Size of ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.evt.gz[events] = 36 counts
[Thu Oct 27 01:03:49 2011] Mean chipx,y = (478.61, 641.44)
[Thu Oct 27 01:03:49 2011] Mean tdetx,y = (3702.44, 4653.39)
[Thu Oct 27 01:03:49 2011] chipx,y range = (457.00-493.00, 621.00-659.00)
[Thu Oct 27 01:03:49 2011] Size of ../../acisf06296/products/events/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 63 counts
[Thu Oct 27 01:03:49 2011] ../../acisf06296/products/images/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.img and ../../acisf06296/products/images/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Thu Oct 27 01:03:49 2011] ../../acisf06296/products/spectra/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.pi and ../../acisf06296/products/spectra/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Thu Oct 27 01:03:49 2011] Not generating rmf since there are only 29 counts
[Thu Oct 27 01:03:52 2011] ../../acisf06296/products/lightcurves/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.lc and ../../acisf06296/products/lightcurves/fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Thu Oct 27 01:04:48 2011] 194.879
[Thu Oct 27 01:06:53 2011] Updating aperture counts using extracted products
[Thu Oct 27 01:06:53 2011] Error reading totcts from fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2_src.pi.gz
[Thu Oct 27 01:06:53 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct 27 01:06:53 2011] Using photon index=1.80, rate=0.0006, arf fullrun_ccd0_acisf06296_pi14-548_pass1_cl_src2.arf
[Thu Oct 27 01:06:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct 27 01:06:53 2011] Updating source flux to 7e-15
[Thu Oct 27 01:06:56 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting