[Tue Oct 18 12:42:12 2011] Detection parameters:
  Position = (736.8, 366.4) = 20 13 16.52 -56 50 20.6
  Extent = 0.5" x 0.5", rotation angle = 122 degrees
  Source counts = 19.2 +/- 4.7
  Background counts = 2.8
  Rate = 0.0004 +/- 9e-05

[Tue Oct 18 12:42:13 2011] Off-axis axis estimate = 2.11'
[Tue Oct 18 12:43:27 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:43:27 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Tue Oct 18 12:43:27 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.151
[Tue Oct 18 12:43:27 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.44"
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10.ximg exists
[Tue Oct 18 12:43:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Oct 18 12:43:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10.csv
[Tue Oct 18 12:43:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Oct 18 12:43:28 2011] Fit fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Oct 18 12:43:40 2011] Spatial fit model total counts = 30.952300, observed total counts = 31.000000
[Tue Oct 18 12:43:40 2011] Offset between fit and detection position for source 9 = 0.741040 pixels
[Tue Oct 18 12:43:40 2011] 31.098700 total counts/ 11.324400 bgd. counts: snr = 5.876159
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.741040 pixels
  Position = (737.2, 367.0) = 20 13 16.52 -56 50 20.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 19.8 +/- 5.6
  Background counts = 11.3
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 12:43:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:43:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:43:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:43:40 2011] Source does appear to be extended
[Tue Oct 18 12:43:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:44:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:44:06 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Oct 18 12:44:06 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.819
[Tue Oct 18 12:44:06 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.42"
[Tue Oct 18 12:44:06 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10.ximg exists
[Tue Oct 18 12:44:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 12:44:06 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Oct 18 12:44:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10.csv
[Tue Oct 18 12:44:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Oct 18 12:44:07 2011] Fit fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Oct 18 12:44:16 2011] Spatial fit model total counts = 28.901300, observed total counts = 29.000000
[Tue Oct 18 12:44:16 2011] Offset between fit and detection position for source 9 = 0.010513 pixels
[Tue Oct 18 12:44:16 2011] 29.297750 total counts/ 9.279550 bgd. counts: snr = 6.571455
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.010513 pixels
  Position = (737.2, 367.0) = 20 13 16.52 -56 50 20.6
  Extent = 0.4 (0.3-0.6)", rotation angle = 0
  Source counts = 20.0 +/- 5.4
  Background counts = 9.3
  Rate = 0.0004 +/- 0.0001
[Tue Oct 18 12:44:16 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:44:16 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:44:16 2011] Source does appear to be extended
[Tue Oct 18 12:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:45:44 2011] Not overwriting source region fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.reg
[Tue Oct 18 12:45:44 2011] Extracting stamp from image fullrun_ccd2_acisf06295_pi14-548_cl_sm2.00.img.gz, (718, 347) - (757, 387)
[Tue Oct 18 12:45:44 2011] Writing fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9.gif
[Tue Oct 18 12:46:09 2011] ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.evt and ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Tue Oct 18 12:46:09 2011] Size of ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.evt.gz[events] = 22 counts
[Tue Oct 18 12:46:09 2011] Mean chipx,y = (353.77, 815.91)
[Tue Oct 18 12:46:09 2011] Mean tdetx,y = (3876.91, 3732.23)
[Tue Oct 18 12:46:09 2011] chipx,y range = (338.00-372.00, 800.00-834.00)
[Tue Oct 18 12:46:09 2011] Size of ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 25 counts
[Tue Oct 18 12:46:09 2011] ../../acisf06295/products/images/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.img and ../../acisf06295/products/images/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Tue Oct 18 12:46:09 2011] ../../acisf06295/products/spectra/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.pi and ../../acisf06295/products/spectra/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Tue Oct 18 12:46:09 2011] Not generating rmf since there are only 20 counts
[Tue Oct 18 12:46:12 2011] ../../acisf06295/products/lightcurves/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.lc and ../../acisf06295/products/lightcurves/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Tue Oct 18 12:46:43 2011] 201.921
[Tue Oct 18 12:47:32 2011] Updating aperture counts using extracted products
[Tue Oct 18 12:47:32 2011] Error reading totcts from fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9_src.pi.gz
[Tue Oct 18 12:47:32 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 12:47:32 2011] Using photon index=1.80, rate=0.000404, arf fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src9.arf
[Tue Oct 18 12:47:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 12:47:32 2011] Updating source flux to 4.5e-15
[Tue Oct 18 12:47:40 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting