[Tue Oct 18 12:42:13 2011] Detection parameters:
  Position = (692.6, 132.9) = 20 13 19.18 -56 52 15.5
  Extent = 0.8" x 0.5", rotation angle = 80 degrees
  Source counts = 11.7 +/- 3.9
  Background counts = 3.3
  Rate = 0.0002 +/- 8e-05

[Tue Oct 18 12:42:13 2011] Off-axis axis estimate = 0.88'
[Tue Oct 18 12:43:27 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:43:27 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Tue Oct 18 12:43:27 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Tue Oct 18 12:43:27 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 0.38"
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17.ximg exists
[Tue Oct 18 12:43:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17_1.ximg exists
[Tue Oct 18 12:43:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17.csv
[Tue Oct 18 12:43:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06295_pi14-548_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src17.ximg exists
[Tue Oct 18 12:43:28 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Oct 18 12:43:28 2011] Fit fullrun_ccd2_acisf06295_pi14-548_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Oct 18 12:43:40 2011] Spatial fit model total counts = 22.935400, observed total counts = 24.000000
[Tue Oct 18 12:43:40 2011] Offset between fit and detection position for source 16 = 0.952199 pixels
[Tue Oct 18 12:43:40 2011] 23.546500 total counts/ 13.279100 bgd. counts: snr = 2.817579
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.952199 pixels
  Position = (693.1, 133.7) = 20 13 19.17 -56 52 15.4
  Extent = 0.6 (0.2-0.9)", rotation angle = 0
  Source counts = 10.3 +/- 4.9
  Background counts = 13.3
  Rate = 0.0002 +/- 0.0001
[Tue Oct 18 12:43:40 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:43:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:43:40 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:43:40 2011] Source does appear to be extended
[Tue Oct 18 12:43:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:44:06 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Oct 18 12:44:06 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Tue Oct 18 12:44:06 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.857
[Tue Oct 18 12:44:06 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 0.55"
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17.ximg exists
[Tue Oct 18 12:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Oct 18 12:44:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17.csv
[Tue Oct 18 12:44:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf06295_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Oct 18 12:44:07 2011] fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Oct 18 12:44:07 2011] Fit fullrun_ccd2_acisf06295_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Oct 18 12:44:16 2011] Spatial fit model total counts = 24.948400, observed total counts = 26.000000
[Tue Oct 18 12:44:16 2011] Offset between fit and detection position for source 16 = 0.041251 pixels
[Tue Oct 18 12:44:16 2011] 25.127960 total counts/ 15.333500 bgd. counts: snr = 2.501266
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.041251 pixels
  Position = (693.1, 133.7) = 20 13 19.17 -56 52 15.4
  Extent = 0.5 (0.2-0.9)", rotation angle = 0
  Source counts = 9.8 +/- 5.0
  Background counts = 15.3
  Rate = 0.0002 +/- 0.0001
[Tue Oct 18 12:44:16 2011] Vigneting correction estimate = 1.000000
[Tue Oct 18 12:44:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Oct 18 12:44:16 2011] Assessing source extent using major axis lower bound
[Tue Oct 18 12:44:16 2011] Source does appear to be extended
[Tue Oct 18 12:44:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Oct 18 12:45:44 2011] Not overwriting source region fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.reg
[Tue Oct 18 12:45:44 2011] Extracting stamp from image fullrun_ccd2_acisf06295_pi14-548_cl_sm2.00.img.gz, (668, 109) - (718, 159)
[Tue Oct 18 12:45:44 2011] Writing fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16.gif
[Tue Oct 18 12:46:30 2011] ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.evt and ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Tue Oct 18 12:46:30 2011] Size of ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.evt.gz[events] = 13 counts
[Tue Oct 18 12:46:30 2011] Mean chipx,y = (189.46, 993.31)
[Tue Oct 18 12:46:30 2011] Mean tdetx,y = (4054.31, 3896.54)
[Tue Oct 18 12:46:30 2011] chipx,y range = (177.00-207.00, 975.00-1007.00)
[Tue Oct 18 12:46:30 2011] Size of ../../acisf06295/products/events/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 39 counts
[Tue Oct 18 12:46:30 2011] ../../acisf06295/products/images/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.img and ../../acisf06295/products/images/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Tue Oct 18 12:46:30 2011] ../../acisf06295/products/spectra/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.pi and ../../acisf06295/products/spectra/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Tue Oct 18 12:46:30 2011] Not generating rmf since there are only 9 counts
[Tue Oct 18 12:46:33 2011] ../../acisf06295/products/lightcurves/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.lc and ../../acisf06295/products/lightcurves/fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Tue Oct 18 12:46:43 2011] 205.133
[Tue Oct 18 12:47:32 2011] Updating aperture counts using extracted products
[Tue Oct 18 12:47:32 2011] Error reading totcts from fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16_src.pi.gz
[Tue Oct 18 12:47:32 2011] Calculating source flux in energy range 0.30-8.00
[Tue Oct 18 12:47:32 2011] Using photon index=1.80, rate=0.000198, arf fullrun_ccd2_acisf06295_pi14-548_pass1_cl_src16.arf
[Tue Oct 18 12:47:32 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Oct 18 12:47:32 2011] Updating source flux to 2.1e-15
[Tue Oct 18 12:47:40 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting