[Sat Oct 15 12:36:14 2011] Detection parameters:
  Position = (992.9, 861.6) = 20 13 9.98 -56 49 46.7
  Extent = 0.9" x 0.5", rotation angle = 53 degrees
  Source counts = 21.7 +/- 5.2
  Background counts = 5.3
  Rate = 0.0005 +/- 0.0001

[Sat Oct 15 12:36:15 2011] Off-axis axis estimate = 4.85'
[Sat Oct 15 12:37:34 2011] Using EEF radius (= 1.12 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:37:34 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Sat Oct 15 12:37:34 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973
[Sat Oct 15 12:37:34 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.12"
[Sat Oct 15 12:37:34 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 15 12:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 12:37:34 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 15 12:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 12:37:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:37:35 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 15 12:37:35 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 15 12:37:35 2011] Fit fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 15 12:37:43 2011] Spatial fit model total counts = 48.998300, observed total counts = 49.000000
[Sat Oct 15 12:37:43 2011] Offset between fit and detection position for source 10 = 1.626234 pixels
[Sat Oct 15 12:37:43 2011] 48.391900 total counts/ 16.438200 bgd. counts: snr = 7.881230
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.626234 pixels
  Position = (992.3, 863.1) = 20 13 10.05 -56 49 46.2
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 32.0 +/- 7.0
  Background counts = 16.4
  Rate = 0.0007 +/- 0.0001
[Sat Oct 15 12:37:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:37:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:37:43 2011] Source does appear to be extended
[Sat Oct 15 12:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:38:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:38:04 2011] Initial guess for spatial extent in simple fitting = 1.12"
[Sat Oct 15 12:38:04 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.979
[Sat Oct 15 12:38:04 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.12"
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 15 12:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 15 12:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 12:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 15 12:38:05 2011] Fit fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 15 12:38:13 2011] Spatial fit model total counts = 44.997600, observed total counts = 45.000000
[Sat Oct 15 12:38:13 2011] Offset between fit and detection position for source 10 = 0.070742 pixels
[Sat Oct 15 12:38:13 2011] 44.521600 total counts/ 11.696900 bgd. counts: snr = 9.597660
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.070742 pixels
  Position = (992.4, 863.1) = 20 13 10.05 -56 49 46.2
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 32.8 +/- 6.7
  Background counts = 11.7
  Rate = 0.0007 +/- 0.0001
[Sat Oct 15 12:38:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:38:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:38:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:38:13 2011] Source does appear to be extended
[Sat Oct 15 12:38:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:38:33 2011] Not overwriting source region fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.reg
[Sat Oct 15 12:38:33 2011] Extracting stamp from image fullrun_ccd0_acisf06292_pi14-548_cl_sm2.00.img.gz, (941, 812) - (1043, 914)
[Sat Oct 15 12:38:33 2011] Writing fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10.gif
[Sat Oct 15 12:39:01 2011] ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.evt and ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sat Oct 15 12:39:01 2011] Size of ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.evt.gz[events] = 49 counts
[Sat Oct 15 12:39:01 2011] Mean chipx,y = (864.59, 494.90)
[Sat Oct 15 12:39:01 2011] Mean tdetx,y = (3555.90, 4267.41)
[Sat Oct 15 12:39:01 2011] chipx,y range = (847.00-888.00, 476.00-516.00)
[Sat Oct 15 12:39:01 2011] Size of ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 222 counts
[Sat Oct 15 12:39:01 2011] ../../acisf06292/products/images/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.img and ../../acisf06292/products/images/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Sat Oct 15 12:39:01 2011] ../../acisf06292/products/spectra/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.pi and ../../acisf06292/products/spectra/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sat Oct 15 12:39:01 2011] Not generating rmf since there are only 32 counts
[Sat Oct 15 12:39:05 2011] ../../acisf06292/products/lightcurves/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.lc and ../../acisf06292/products/lightcurves/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sat Oct 15 12:39:31 2011] 189.743
[Sat Oct 15 12:41:21 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:41:21 2011] Error reading totcts from fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10_src.pi.gz
[Sat Oct 15 12:41:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:41:21 2011] Using photon index=1.80, rate=0.000703, arf fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src10.arf
[Sat Oct 15 12:41:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:41:21 2011] Updating source flux to 8.3e-15
[Sat Oct 15 12:41:24 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting