[Sat Oct 15 12:36:14 2011] Detection parameters:
  Position = (1070.3, 529.7) = 20 13 5.35 -56 52 30.0
  Extent = 0.5" x 0.5", rotation angle = 42 degrees
  Source counts = 657.0 +/- 26.2
  Background counts = 29.0
  Rate = 0.01 +/- 0.0006

[Sat Oct 15 12:36:15 2011] Off-axis axis estimate = 2.06'
[Sat Oct 15 12:37:34 2011] Using EEF radius (= 0.44 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:37:34 2011] Initial guess for spatial extent in simple fitting = 0.44"
[Sat Oct 15 12:37:34 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.170
[Sat Oct 15 12:37:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.44"
[Sat Oct 15 12:37:34 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 12:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 12:37:34 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 12:37:34 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 12:37:34 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06292_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:37:35 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 12:37:35 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 12:37:35 2011] Fit fullrun_ccd0_acisf06292_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 12:37:43 2011] Spatial fit model total counts = 706.997000, observed total counts = 707.000000
[Sat Oct 15 12:37:43 2011] Offset between fit and detection position for source 1 = 0.733844 pixels
[Sat Oct 15 12:37:43 2011] 706.160900 total counts/ 73.449900 bgd. counts: snr = 73.826075
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.733844 pixels
  Position = (1070.8, 530.3) = 20 13 5.35 -56 52 29.9
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 632.7 +/- 26.6
  Background counts = 73.4
  Rate = 0.01 +/- 0.0006
[Sat Oct 15 12:37:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:37:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:37:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:37:43 2011] Source does appear to be extended
[Sat Oct 15 12:37:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:38:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 12:38:04 2011] Initial guess for spatial extent in simple fitting = 0.49"
[Sat Oct 15 12:38:04 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.012
[Sat Oct 15 12:38:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.49"
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 12:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 12:38:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 12:38:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06292_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 12:38:05 2011] fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 12:38:05 2011] Fit fullrun_ccd0_acisf06292_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 12:38:13 2011] Spatial fit model total counts = 707.000000, observed total counts = 707.000000
[Sat Oct 15 12:38:13 2011] Offset between fit and detection position for source 1 = 0.000002 pixels
[Sat Oct 15 12:38:13 2011] 706.164500 total counts/ 73.450500 bgd. counts: snr = 73.826124
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000002 pixels
  Position = (1070.8, 530.3) = 20 13 5.35 -56 52 29.9
  Extent = 0.5 (0.5-0.5)", rotation angle = 0
  Source counts = 632.7 +/- 26.6
  Background counts = 73.5
  Rate = 0.01 +/- 0.0006
[Sat Oct 15 12:38:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 12:38:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 12:38:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 12:38:13 2011] Source does appear to be extended
[Sat Oct 15 12:38:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 12:38:33 2011] Not overwriting source region fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 12:38:33 2011] Extracting stamp from image fullrun_ccd0_acisf06292_pi14-548_cl_sm2.00.img.gz, (1049, 508) - (1093, 553)
[Sat Oct 15 12:38:33 2011] Writing fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 12:38:34 2011] ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.evt and ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 12:38:34 2011] Size of ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.evt.gz[events] = 649 counts
[Sat Oct 15 12:38:34 2011] Mean chipx,y = (782.01, 827.65)
[Sat Oct 15 12:38:34 2011] Mean tdetx,y = (3888.65, 4349.99)
[Sat Oct 15 12:38:34 2011] chipx,y range = (763.00-799.00, 809.00-847.00)
[Sat Oct 15 12:38:34 2011] Size of ../../acisf06292/products/events/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 134 counts
[Sat Oct 15 12:38:34 2011] ../../acisf06292/products/images/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.img and ../../acisf06292/products/images/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 12:38:34 2011] ../../acisf06292/products/spectra/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.pi and ../../acisf06292/products/spectra/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 12:38:37 2011] ../../acisf06292/products/lightcurves/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.lc and ../../acisf06292/products/lightcurves/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 12:39:31 2011] Keeping rmf generated by specextract
[Sat Oct 15 12:39:31 2011] 201.178
[Sat Oct 15 12:41:21 2011] Updating aperture counts using extracted products
[Sat Oct 15 12:41:21 2011] Error reading totcts from fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 12:41:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:41:21 2011] Using photon index=1.80, rate=0.0136, arf fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 12:41:21 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:41:21 2011] Updating source flux to 1.5e-13
[Sat Oct 15 12:41:30 2011] Reading fit data from acisf06292/analysis//spectral/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 12:41:30 2011] Spectral fit parameter nH value = 4.01055e+20
[Sat Oct 15 12:41:30 2011] Spectral fit parameter PhoIndex value = 1.6564
[Sat Oct 15 12:41:30 2011] Failed to get F(0.3-8.0) from acisf06292/analysis//spectral/fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 12:41:30 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 12:41:30 2011] Using Nh = 4e+20, photon index=1.66, rate=0.0136, arf fullrun_ccd0_acisf06292_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 12:41:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 12:41:30 2011] Updating source flux to 1.6e-13