[Mon Jan 14 00:38:15 2013] Detection parameters:
  Position = (717.5, 172.6) = 16 54 23.01 -41 48 48.5
  Extent = 0.5" x 0.5", rotation angle = 35 degrees
  Source counts = 26.4 +/- 5.3
  Background counts = 1.6
  Rate = 0.0006 +/- 0.0001

[Mon Jan 14 00:38:58 2013] Off-axis axis estimate = 1.99'
[Mon Jan 14 06:58:19 2013] Using EEF radius (= 0.43 ")to estimate initial spatial extent for simple fitting
[Mon Jan 14 06:58:19 2013] Initial guess for spatial extent in simple fitting = 0.43"
[Mon Jan 14 06:58:19 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.196
[Mon Jan 14 06:58:19 2013] Giving source the simple spatial ID 87 for pass 0, mean size = 0.43"
[Mon Jan 14 09:02:24 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass0_src87.ximg exists
[Mon Jan 14 09:02:24 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass0_src87_1.ximg exists
[Mon Jan 14 09:02:24 2013] Fit fullrun_ccd3_acisf06291_pi14-548_cl_pass0_src87 appears to have run properly
[Mon Jan 14 09:02:25 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass0_tfrozen_src87.ximg exists
[Mon Jan 14 09:02:25 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass0_tfrozen_src87_1.ximg exists
[Mon Jan 14 09:02:25 2013] Fit fullrun_ccd3_acisf06291_pi14-548_cl_pass0_tfrozen_src87 appears to have run properly
[Mon Jan 14 09:27:48 2013] Spatial fit model total counts = 51.482200, observed total counts = 54.000000
[Mon Jan 14 09:27:48 2013] Offset between fit and detection position for source 36 = 0.811862 pixels
[Mon Jan 14 09:27:48 2013] 50.824100 total counts/ 27.580600 bgd. counts: snr = 4.425880
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 0.811862 pixels
  Position = (718.2, 173.0) = 16 54 23.01 -41 48 48.6
  Extent = 0.5 (0.3-0.7)" x 0.2 (0.2-0.3)", rotation angle = 125 (99-144) degrees
  Source counts = 23.2 +/- 7.1
  Background counts = 27.6
  Rate = 0.0005 +/- 0.0002
[Mon Jan 14 09:27:48 2013] Vigneting correction estimate = 1.000000
[Mon Jan 14 09:27:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 14 09:27:48 2013] Assessing source extent using major axis lower bound
[Mon Jan 14 09:27:48 2013] Source does appear to be extended
[Mon Jan 14 09:27:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Mon Jan 14 15:28:56 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jan 14 15:28:56 2013] Initial guess for spatial extent in simple fitting = 0.36"
[Mon Jan 14 15:28:56 2013] source mask rpix=0.7, npix_max = 6, mask sum = 4, frac = 0.663
[Mon Jan 14 15:28:56 2013] Giving source the simple spatial ID 87 for pass 1, mean size = 0.36"
[Mon Jan 14 17:31:31 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87.ximg exists
[Mon Jan 14 17:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87.csv
[Mon Jan 14 17:31:31 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87_1.ximg exists
[Mon Jan 14 17:31:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87.csv
[Mon Jan 14 17:31:31 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06291_pi14-548_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 14 17:31:32 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87.ximg exists
[Mon Jan 14 17:31:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87.csv
[Mon Jan 14 17:31:32 2013] fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87_1.ximg exists
[Mon Jan 14 17:31:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87.csv
[Mon Jan 14 17:31:32 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06291_pi14-548_cl_pass1_tfrozen_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 14 17:57:38 2013] Spatial fit model total counts = 44.801700, observed total counts = 54.000000
[Mon Jan 14 17:57:38 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jan 14 17:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jan 14 17:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 14 17:57:38 2013] Assessing source extent using major axis lower bound
[Mon Jan 14 17:57:38 2013] Source does appear to be extended
[Mon Jan 14 17:57:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.91
[Mon Jan 14 19:52:08 2013] Writing source region out to fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_src.reg
[Mon Jan 14 19:52:08 2013] Extracting stamp from image fullrun_ccd3_acisf06291_pi14-548_cl_sm2.00.img.gz, (696, 151) - (740, 195)
[Mon Jan 14 19:52:08 2013] Writing fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36.gif
[Mon Jan 14 20:07:36 2013] Size of ../../acisf06291/products/events/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_src.evt.gz[events] = 25 counts
[Mon Jan 14 20:07:36 2013] Mean chipx,y = (729.32, 943.88)
[Mon Jan 14 20:07:36 2013] Mean tdetx,y = (4188.12, 3790.32)
[Mon Jan 14 20:07:36 2013] chipx,y range = (712.00-746.00, 926.00-960.00)
[Mon Jan 14 20:07:36 2013] Size of ../../acisf06291/products/events/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_bgd.evt.gz[events] = 12 counts
[Mon Jan 14 20:07:38 2013] Not generating rmf since there are only 23 counts
[Mon Jan 14 20:07:38 2013] arf not found, will run specextract
[Mon Jan 14 20:07:39 2013] ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_bkg.pi not found
[Mon Jan 14 20:07:39 2013] ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36.warf not found
[Mon Jan 14 20:07:39 2013] ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36.wrmf not found
[Mon Jan 14 20:07:39 2013] Removal of ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36.soff failed
[Mon Jan 14 20:07:39 2013] Failed to rename ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_grp.pi to ../../acisf06291/products/spectra/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_src.pi
[Mon Jan 14 20:38:19 2013] No arf file found
[Mon Jan 14 20:39:21 2013] Updating aperture counts using extracted products
[Mon Jan 14 20:39:21 2013] Error reading totcts from fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_src.pi
[Mon Jan 14 20:39:23 2013] No arf file for this source, not re-computing flux
[Mon Jan 14 20:39:43 2013] Flag p found in src. 36 procflags, skipping spectral fitting
[Mon Jan 14 20:39:43 2013] Source 36 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jan 14 20:39:44 2013] acisf06291/analysis//spectral/fullrun_ccd3_acisf06291_pi14-548_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete