[Sat Oct  1 07:48:00 2011] Detection parameters:
  Position = (45.5, 353.3) = 13 51 14.66 68 25 4.2
  Extent = 3.5" x 2.4", rotation angle = 137 degrees
  Source counts = 438.2 +/- 22.5
  Background counts = 65.8
  Rate = 0.02 +/- 0.0008

[Sat Oct  1 07:48:00 2011] Off-axis axis estimate = 8.96'
[Sat Oct  1 07:48:55 2011] Using EEF radius (= 3.55 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 07:48:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 07:48:55 2011] Initial guess for spatial extent in simple fitting = 3.55"
[Sat Oct  1 07:48:55 2011] source mask rpix=7.2, npix_max = 237, mask sum = 225, frac = 0.946
[Sat Oct  1 07:48:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.55"
[Sat Oct  1 07:48:57 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct  1 07:48:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 07:48:57 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct  1 07:48:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1.csv
[Sat Oct  1 07:48:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06284_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 07:48:58 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct  1 07:48:58 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct  1 07:48:58 2011] Fit fullrun_ccd6_acisf06284_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct  1 07:49:07 2011] Spatial fit model total counts = 616.358000, observed total counts = 606.000000
[Sat Oct  1 07:49:07 2011] Offset between fit and detection position for source 18 = 2.170468 pixels
[Sat Oct  1 07:49:07 2011] 616.201700 total counts/ 25.440700 bgd. counts: snr = 117.124376
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.170468 pixels
  Position = (45.6, 351.2) = 13 51 14.69 68 25 2.9
  Extent = 4.5 (4.3-4.8)", rotation angle = 0
  Source counts = 590.8 +/- 24.8
  Background counts = 25.4
  Rate = 0.02 +/- 0.0009
[Sat Oct  1 07:49:07 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 07:49:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 07:49:07 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 07:49:07 2011] Source does appear to be extended
[Sat Oct  1 07:49:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 07:49:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct  1 07:49:25 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 07:49:25 2011] Initial guess for spatial extent in simple fitting = 4.53"
[Sat Oct  1 07:49:25 2011] source mask rpix=9.2, npix_max = 376, mask sum = 377, frac = 1.000
[Sat Oct  1 07:49:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.53"
[Sat Oct  1 07:49:25 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct  1 07:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 07:49:25 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct  1 07:49:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1.csv
[Sat Oct  1 07:49:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf06284_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 07:49:26 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct  1 07:49:26 2011] fullrun_ccd6_acisf06284_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct  1 07:49:26 2011] Fit fullrun_ccd6_acisf06284_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct  1 07:49:35 2011] Spatial fit model total counts = 631.003000, observed total counts = 617.000000
[Sat Oct  1 07:49:35 2011] Offset between fit and detection position for source 18 = 0.380862 pixels
[Sat Oct  1 07:49:35 2011] 630.787700 total counts/ 43.485700 bgd. counts: snr = 89.061139
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.380862 pixels
  Position = (45.4, 351.5) = 13 51 14.71 68 25 3.1
  Extent = 4.5 (4.3-4.8)", rotation angle = 0
  Source counts = 587.3 +/- 25.1
  Background counts = 43.5
  Rate = 0.02 +/- 0.0009
[Sat Oct  1 07:49:35 2011] Vigneting correction estimate = 1.000000
[Sat Oct  1 07:49:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct  1 07:49:35 2011] Assessing source extent using major axis lower bound
[Sat Oct  1 07:49:35 2011] Source does appear to be extended
[Sat Oct  1 07:49:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct  1 07:50:31 2011] Not overwriting source region fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.reg
[Sat Oct  1 07:50:31 2011] Extracting stamp from image fullrun_ccd6_acisf06284_pi14-548_cl_sm2.00.img.gz, (0, 146) - (251, 557)
[Sat Oct  1 07:50:31 2011] Writing fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18.gif
[Sat Oct  1 07:50:32 2011] ../../acisf06284/products/events/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.evt and ../../acisf06284/products/events/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Oct  1 07:50:32 2011] Size of ../../acisf06284/products/events/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.evt.gz[events] = 611 counts
[Sat Oct  1 07:50:32 2011] Mean chipx,y = (270.98, 24.02)
[Sat Oct  1 07:50:32 2011] Mean tdetx,y = (3145.98, 1726.02)
[Sat Oct  1 07:50:32 2011] chipx,y range = (231.00-311.00, 3.00-62.00)
[Sat Oct  1 07:50:32 2011] Size of ../../acisf06284/products/events/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 211 counts
[Sat Oct  1 07:50:32 2011] ../../acisf06284/products/images/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.img and ../../acisf06284/products/images/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Oct  1 07:50:32 2011] ../../acisf06284/products/spectra/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.pi and ../../acisf06284/products/spectra/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Oct  1 07:50:35 2011] ../../acisf06284/products/lightcurves/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.lc and ../../acisf06284/products/lightcurves/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Oct  1 07:51:13 2011] Keeping rmf generated by specextract
[Sat Oct  1 07:51:13 2011] 175.116
[Sat Oct  1 07:52:40 2011] Updating aperture counts using extracted products
[Sat Oct  1 07:52:40 2011] Error reading totcts from fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_src.pi.gz
[Sat Oct  1 07:52:40 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 07:52:40 2011] Using photon index=1.80, rate=0.0207, arf fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18.arf
[Sat Oct  1 07:52:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 07:52:40 2011] Updating source flux to 2.6e-13
[Sat Oct  1 07:53:05 2011] Reading fit data from acisf06284/analysis//spectral/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_pl.csv
[Sat Oct  1 07:53:05 2011] Spectral fit parameter nH value = 2.84036e+21
[Sat Oct  1 07:53:05 2011] Spectral fit parameter PhoIndex value = 2.05386
[Sat Oct  1 07:53:05 2011] Failed to get F(0.3-8.0) from acisf06284/analysis//spectral/fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18_pl.csv, possibly due to different flux energy range selected
[Sat Oct  1 07:53:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct  1 07:53:05 2011] Using Nh = 2.8e+21, photon index=2.05, rate=0.0207, arf fullrun_ccd6_acisf06284_pi14-548_pass1_cl_src18.arf
[Sat Oct  1 07:53:05 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct  1 07:53:05 2011] Updating source flux to 2.3e-13