[Sat Oct 29 18:03:55 2011] Detection parameters:
  Position = (371.2, 596.4) = 16 47 10.21 -45 52 17.1
  Extent = 0.5" x 0.5", rotation angle = 76 degrees
  Source counts = 429.3 +/- 20.8
  Background counts = 4.7
  Rate = 0.02 +/- 0.001

[Sat Oct 29 18:03:59 2011] Off-axis axis estimate = 1.86'
[Sat Oct 29 18:04:43 2011] Using EEF radius (= 0.42 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:04:43 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct 29 18:04:43 2011] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.241
[Sat Oct 29 18:04:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.42"
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1.csv
[Sat Oct 29 18:04:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:04:44 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:04:53 2011] Spatial fit model total counts = 438.000000, observed total counts = 438.000000
[Sat Oct 29 18:04:53 2011] Offset between fit and detection position for source 2 = 0.707851 pixels
[Sat Oct 29 18:04:53 2011] 438.226700 total counts/ 17.951700 bgd. counts: snr = 99.192941
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.707851 pixels
  Position = (371.7, 597.0) = 16 47 10.21 -45 52 17.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 420.3 +/- 20.9
  Background counts = 18.0
  Rate = 0.02 +/- 0.001
[Sat Oct 29 18:04:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:04:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:04:53 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:04:53 2011] Source does appear to be extended
[Sat Oct 29 18:04:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:05:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:05:14 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Sat Oct 29 18:05:14 2011] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.710
[Sat Oct 29 18:05:14 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.47"
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1.csv
[Sat Oct 29 18:05:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 29 18:05:15 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 29 18:05:26 2011] Spatial fit model total counts = 437.999000, observed total counts = 438.000000
[Sat Oct 29 18:05:26 2011] Offset between fit and detection position for source 2 = 0.002993 pixels
[Sat Oct 29 18:05:26 2011] 437.561500 total counts/ 17.540500 bgd. counts: snr = 100.288242
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002993 pixels
  Position = (371.7, 597.0) = 16 47 10.21 -45 52 17.1
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 420.0 +/- 20.9
  Background counts = 17.5
  Rate = 0.02 +/- 0.001
[Sat Oct 29 18:05:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:05:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:05:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:05:26 2011] Source does appear to be extended
[Sat Oct 29 18:05:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:06:15 2011] Not overwriting source region fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 29 18:06:15 2011] Extracting stamp from image fullrun_ccd7_acisf06283_pi14-548_cl_sm2.00.img.gz, (350, 576) - (393, 618)
[Sat Oct 29 18:06:15 2011] Writing fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2.gif
[Sat Oct 29 18:06:19 2011] ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.evt and ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 29 18:06:19 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.evt.gz[events] = 425 counts
[Sat Oct 29 18:06:19 2011] Mean chipx,y = (270.20, 726.24)
[Sat Oct 29 18:06:19 2011] Mean tdetx,y = (4187.20, 2428.24)
[Sat Oct 29 18:06:19 2011] chipx,y range = (250.00-288.00, 708.00-746.00)
[Sat Oct 29 18:06:19 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 26 counts
[Sat Oct 29 18:06:19 2011] ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.img and ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 29 18:06:19 2011] ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.pi and ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Sat Oct 29 18:06:21 2011] ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.lc and ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 29 18:08:20 2011] Keeping rmf generated by specextract
[Sat Oct 29 18:08:20 2011] 222.049
[Sat Oct 29 18:08:23 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:08:23 2011] Error reading totcts from fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_src.pi.gz
[Sat Oct 29 18:08:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:23 2011] Using photon index=1.80, rate=0.0223, arf fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 18:08:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:23 2011] Updating source flux to 3.5e-13
[Sat Oct 29 18:08:52 2011] Reading fit data from acisf06283/analysis//spectral/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_pl.csv
[Sat Oct 29 18:08:52 2011] Spectral fit parameter nH value = 4.87673e+22
[Sat Oct 29 18:08:52 2011] Spectral fit parameter PhoIndex value = 5.02011
[Sat Oct 29 18:08:52 2011] Failed to get F(0.3-8.0) from acisf06283/analysis//spectral/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Oct 29 18:08:52 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:52 2011] Using Nh = 4.9e+22, photon index=5.02, rate=0.0223, arf fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src2.arf
[Sat Oct 29 18:08:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:52 2011] Updating source flux to 2.2e-13