[Sat Oct 29 18:03:56 2011] Detection parameters:
  Position = (742.5, 393.2) = 16 46 52.71 -45 53 57.1
  Extent = 0.7" x 0.5", rotation angle = 137 degrees
  Source counts = 15.2 +/- 4.1
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0002

[Sat Oct 29 18:03:59 2011] Off-axis axis estimate = 4.46'
[Sat Oct 29 18:04:43 2011] Using EEF radius (= 0.98 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:04:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 29 18:04:43 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Sat Oct 29 18:04:43 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.011
[Sat Oct 29 18:04:43 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 0.98"
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18.csv
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18_1.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18.csv
[Sat Oct 29 18:04:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:04:45 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Sat Oct 29 18:04:45 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Sat Oct 29 18:04:45 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Sat Oct 29 18:04:53 2011] Spatial fit model total counts = 22.811500, observed total counts = 23.000000
[Sat Oct 29 18:04:53 2011] Offset between fit and detection position for source 14 = 0.790931 pixels
[Sat Oct 29 18:04:53 2011] 22.698060 total counts/ 7.870360 bgd. counts: snr = 5.285383
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.790931 pixels
  Position = (742.8, 393.9) = 16 46 52.72 -45 53 57.0
  Extent = 0.7 (0.5-1.4)", rotation angle = 0
  Source counts = 14.8 +/- 4.8
  Background counts = 7.9
  Rate = 0.0008 +/- 0.0003
[Sat Oct 29 18:04:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:04:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:04:53 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:04:53 2011] Source does appear to be extended
[Sat Oct 29 18:04:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:05:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:05:14 2011] Initial guess for spatial extent in simple fitting = 0.73"
[Sat Oct 29 18:05:14 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.013
[Sat Oct 29 18:05:14 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 0.73"
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18.csv
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18_1.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18.csv
[Sat Oct 29 18:05:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Sat Oct 29 18:05:15 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Sat Oct 29 18:05:26 2011] Spatial fit model total counts = 22.595900, observed total counts = 23.000000
[Sat Oct 29 18:05:26 2011] Offset between fit and detection position for source 14 = 0.058608 pixels
[Sat Oct 29 18:05:26 2011] 22.480790 total counts/ 7.658790 bgd. counts: snr = 5.355829
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.058608 pixels
  Position = (742.9, 394.0) = 16 46 52.72 -45 53 56.9
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 14.8 +/- 4.7
  Background counts = 7.7
  Rate = 0.0008 +/- 0.0003
[Sat Oct 29 18:05:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:05:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:05:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:05:26 2011] Source does appear to be extended
[Sat Oct 29 18:05:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:06:15 2011] Not overwriting source region fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.reg
[Sat Oct 29 18:06:15 2011] Extracting stamp from image fullrun_ccd7_acisf06283_pi14-548_cl_sm2.00.img.gz, (709, 360) - (777, 428)
[Sat Oct 29 18:06:15 2011] Writing fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14.gif
[Sat Oct 29 18:07:09 2011] ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.evt and ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Oct 29 18:07:09 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.evt.gz[events] = 19 counts
[Sat Oct 29 18:07:09 2011] Mean chipx,y = (690.11, 751.68)
[Sat Oct 29 18:07:09 2011] Mean tdetx,y = (4607.11, 2453.68)
[Sat Oct 29 18:07:09 2011] chipx,y range = (677.00-711.00, 734.00-771.00)
[Sat Oct 29 18:07:09 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 32 counts
[Sat Oct 29 18:07:09 2011] ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.img and ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Oct 29 18:07:09 2011] ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.pi and ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Sat Oct 29 18:07:09 2011] Not generating rmf since there are only 14 counts
[Sat Oct 29 18:07:11 2011] ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.lc and ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Oct 29 18:08:20 2011] 224.408
[Sat Oct 29 18:08:23 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:08:23 2011] Error reading totcts from fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14_src.pi.gz
[Sat Oct 29 18:08:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:23 2011] Using photon index=1.80, rate=0.000788, arf fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src14.arf
[Sat Oct 29 18:08:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:24 2011] Updating source flux to 1.2e-14
[Sat Oct 29 18:08:30 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting