[Sat Oct 29 18:03:56 2011] Detection parameters:
  Position = (297.9, 1002.3) = 16 47 13.66 -45 48 57.5
  Extent = 0.6" x 0.5", rotation angle = 151 degrees
  Source counts = 28.5 +/- 5.5
  Background counts = 1.5
  Rate = 0.002 +/- 0.0003

[Sat Oct 29 18:03:59 2011] Off-axis axis estimate = 1.74'
[Sat Oct 29 18:04:43 2011] Using EEF radius (= 0.41 ")to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:04:43 2011] Initial guess for spatial extent in simple fitting = 0.41"
[Sat Oct 29 18:04:43 2011] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.851
[Sat Oct 29 18:04:43 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.41"
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 29 18:04:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10.csv
[Sat Oct 29 18:04:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 29 18:04:44 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 29 18:04:44 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 29 18:04:53 2011] Spatial fit model total counts = 29.732300, observed total counts = 31.000000
[Sat Oct 29 18:04:53 2011] Offset between fit and detection position for source 12 = 0.727699 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.727699 pixels
  Position = (298.4, 1002.8) = 16 47 13.66 -45 48 57.4
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 29.9 +/- 5.5
  Background counts = 0.0
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 18:04:53 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:04:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:04:53 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:04:53 2011] Source does appear to be extended
[Sat Oct 29 18:04:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:05:14 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 29 18:05:14 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Sat Oct 29 18:05:14 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.962
[Sat Oct 29 18:05:14 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.62"
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10.csv
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 29 18:05:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10.csv
[Sat Oct 29 18:05:15 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06283_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 29 18:05:15 2011] fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 29 18:05:15 2011] Fit fullrun_ccd7_acisf06283_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 29 18:05:26 2011] Spatial fit model total counts = 31.395800, observed total counts = 33.000000
[Sat Oct 29 18:05:26 2011] Offset between fit and detection position for source 12 = 0.031217 pixels
[Sat Oct 29 18:05:26 2011] 32.404110 total counts/ 2.092510 bgd. counts: snr = 20.954393
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.031217 pixels
  Position = (298.3, 1002.8) = 16 47 13.66 -45 48 57.5
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 30.3 +/- 5.7
  Background counts = 2.1
  Rate = 0.002 +/- 0.0003
[Sat Oct 29 18:05:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 29 18:05:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 29 18:05:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 29 18:05:26 2011] Source does appear to be extended
[Sat Oct 29 18:05:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 29 18:06:15 2011] Not overwriting source region fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.reg
[Sat Oct 29 18:06:15 2011] Extracting stamp from image fullrun_ccd7_acisf06283_pi14-548_cl_sm2.00.img.gz, (271, 975) - (326, 1030)
[Sat Oct 29 18:06:15 2011] Writing fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12.gif
[Sat Oct 29 18:06:46 2011] ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.evt and ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sat Oct 29 18:06:46 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.evt.gz[events] = 30 counts
[Sat Oct 29 18:06:46 2011] Mean chipx,y = (28.80, 394.80)
[Sat Oct 29 18:06:46 2011] Mean tdetx,y = (3945.80, 2096.80)
[Sat Oct 29 18:06:46 2011] chipx,y range = (10.00-45.00, 375.00-409.00)
[Sat Oct 29 18:06:47 2011] Size of ../../acisf06283/products/events/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 20 counts
[Sat Oct 29 18:06:47 2011] ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.img and ../../acisf06283/products/images/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sat Oct 29 18:06:47 2011] ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.pi and ../../acisf06283/products/spectra/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Sat Oct 29 18:06:47 2011] Not generating rmf since there are only 30 counts
[Sat Oct 29 18:06:49 2011] ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.lc and ../../acisf06283/products/lightcurves/fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sat Oct 29 18:08:20 2011] 232.642
[Sat Oct 29 18:08:23 2011] Updating aperture counts using extracted products
[Sat Oct 29 18:08:23 2011] Error reading totcts from fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12_src.pi.gz
[Sat Oct 29 18:08:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 29 18:08:23 2011] Using photon index=1.80, rate=0.00161, arf fullrun_ccd7_acisf06283_pi14-548_pass1_cl_src12.arf
[Sat Oct 29 18:08:23 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 29 18:08:23 2011] Updating source flux to 2.4e-14
[Sat Oct 29 18:08:30 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting