[Mon Oct 17 06:19:51 2011] Detection parameters:
  Position = (1071.4, 906.0) = 15 22 52.45 8 37 35.8
  Extent = 0.8" x 0.5", rotation angle = 58 degrees
  Source counts = 103.8 +/- 10.5
  Background counts = 7.2
  Rate = 0.006 +/- 0.0006

[Mon Oct 17 06:19:52 2011] Off-axis axis estimate = 2.95'
[Mon Oct 17 06:20:32 2011] Using EEF radius (= 0.57 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:20:32 2011] Initial guess for spatial extent in simple fitting = 0.57"
[Mon Oct 17 06:20:32 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.089
[Mon Oct 17 06:20:32 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.57"
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 17 06:20:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 17 06:20:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3.csv
[Mon Oct 17 06:20:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 17 06:20:33 2011] Fit fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Oct 17 06:20:37 2011] Spatial fit model total counts = 114.180000, observed total counts = 115.000000
[Mon Oct 17 06:20:37 2011] Offset between fit and detection position for source 5 = 0.850464 pixels
[Mon Oct 17 06:20:37 2011] 113.340200 total counts/ 17.482400 bgd. counts: snr = 22.925928
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.850464 pixels
  Position = (1072.0, 906.6) = 15 22 52.45 8 37 35.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 95.9 +/- 10.6
  Background counts = 17.5
  Rate = 0.006 +/- 0.0006
[Mon Oct 17 06:20:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:20:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:20:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:20:37 2011] Source does appear to be extended
[Mon Oct 17 06:20:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:20:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:20:49 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Mon Oct 17 06:20:49 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.858
[Mon Oct 17 06:20:49 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.67"
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 17 06:20:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 17 06:20:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3.csv
[Mon Oct 17 06:20:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 17 06:20:49 2011] Fit fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Oct 17 06:20:55 2011] Spatial fit model total counts = 113.355000, observed total counts = 113.000000
[Mon Oct 17 06:20:55 2011] Offset between fit and detection position for source 5 = 0.017616 pixels
[Mon Oct 17 06:20:55 2011] 112.672400 total counts/ 15.448500 bgd. counts: snr = 24.736023
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.017616 pixels
  Position = (1072.0, 906.6) = 15 22 52.45 8 37 35.8
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 97.2 +/- 10.6
  Background counts = 15.4
  Rate = 0.006 +/- 0.0006
[Mon Oct 17 06:20:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:20:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:20:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:20:55 2011] Source does appear to be extended
[Mon Oct 17 06:20:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:21:29 2011] Not overwriting source region fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.reg
[Mon Oct 17 06:21:29 2011] Extracting stamp from image fullrun_ccd7_acisf06263_pi14-548_cl_sm2.00.img.gz, (1041, 876) - (1103, 937)
[Mon Oct 17 06:21:29 2011] Writing fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5.gif
[Mon Oct 17 06:21:35 2011] ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.evt and ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Oct 17 06:21:35 2011] Size of ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.evt.gz[events] = 105 counts
[Mon Oct 17 06:21:35 2011] Mean chipx,y = (129.95, 160.50)
[Mon Oct 17 06:21:35 2011] Mean tdetx,y = (4046.95, 1862.50)
[Mon Oct 17 06:21:35 2011] chipx,y range = (112.00-152.00, 142.00-177.00)
[Mon Oct 17 06:21:35 2011] Size of ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 46 counts
[Mon Oct 17 06:21:35 2011] ../../acisf06263/products/images/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.img and ../../acisf06263/products/images/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Oct 17 06:21:35 2011] ../../acisf06263/products/spectra/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.pi and ../../acisf06263/products/spectra/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Oct 17 06:21:35 2011] Not generating rmf since there are only 97 counts
[Mon Oct 17 06:21:38 2011] ../../acisf06263/products/lightcurves/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.lc and ../../acisf06263/products/lightcurves/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Oct 17 06:22:02 2011] 229.172
[Mon Oct 17 06:22:04 2011] Updating aperture counts using extracted products
[Mon Oct 17 06:22:04 2011] Error reading totcts from fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Oct 17 06:22:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 06:22:04 2011] Using photon index=1.80, rate=0.00579, arf fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src5.arf
[Mon Oct 17 06:22:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 06:22:04 2011] Updating source flux to 4.3e-14
[Mon Oct 17 06:22:15 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting