[Mon Oct 17 06:19:51 2011] Detection parameters:
  Position = (1054.8, 733.6) = 15 22 53.00 8 36 11.0
  Extent = 0.8" x 0.6", rotation angle = 38 degrees
  Source counts = 22.6 +/- 5.3
  Background counts = 5.4
  Rate = 0.001 +/- 0.0003

[Mon Oct 17 06:19:52 2011] Off-axis axis estimate = 3.22'
[Mon Oct 17 06:20:32 2011] Using EEF radius (= 0.63 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:20:32 2011] Initial guess for spatial extent in simple fitting = 0.63"
[Mon Oct 17 06:20:32 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.952
[Mon Oct 17 06:20:32 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.63"
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 17 06:20:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 17 06:20:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9.csv
[Mon Oct 17 06:20:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06263_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 17 06:20:33 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 17 06:20:33 2011] Fit fullrun_ccd7_acisf06263_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 17 06:20:37 2011] Spatial fit model total counts = 35.562900, observed total counts = 36.000000
[Mon Oct 17 06:20:37 2011] Offset between fit and detection position for source 2 = 0.768935 pixels
[Mon Oct 17 06:20:37 2011] 37.049500 total counts/ 15.357700 bgd. counts: snr = 5.535190
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.768935 pixels
  Position = (1055.2, 734.3) = 15 22 53.00 8 36 11.1
  Extent = 0.8 (0.4-1.1)", rotation angle = 0
  Source counts = 21.7 +/- 6.1
  Background counts = 15.4
  Rate = 0.001 +/- 0.0004
[Mon Oct 17 06:20:37 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:20:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:20:37 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:20:37 2011] Source does appear to be extended
[Mon Oct 17 06:20:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:20:49 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 06:20:49 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Mon Oct 17 06:20:49 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.946
[Mon Oct 17 06:20:49 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 0.77"
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9.ximg exists
[Mon Oct 17 06:20:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9_1.ximg exists
[Mon Oct 17 06:20:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9.csv
[Mon Oct 17 06:20:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf06263_pi14-548_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src9.ximg exists
[Mon Oct 17 06:20:49 2011] fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Oct 17 06:20:49 2011] Fit fullrun_ccd7_acisf06263_pi14-548_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Oct 17 06:20:55 2011] Spatial fit model total counts = 36.588400, observed total counts = 37.000000
[Mon Oct 17 06:20:55 2011] Offset between fit and detection position for source 2 = 0.118496 pixels
[Mon Oct 17 06:20:55 2011] 38.059600 total counts/ 14.454800 bgd. counts: snr = 6.208609
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.118496 pixels
  Position = (1055.2, 734.2) = 15 22 53.00 8 36 11.0
  Extent = 0.8 (0.4-1.1)", rotation angle = 0
  Source counts = 23.6 +/- 6.2
  Background counts = 14.5
  Rate = 0.001 +/- 0.0004
[Mon Oct 17 06:20:55 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:20:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:20:55 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:20:55 2011] Source does appear to be extended
[Mon Oct 17 06:20:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:21:29 2011] Not overwriting source region fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.reg
[Mon Oct 17 06:21:29 2011] Extracting stamp from image fullrun_ccd7_acisf06263_pi14-548_cl_sm2.00.img.gz, (1018, 697) - (1092, 771)
[Mon Oct 17 06:21:29 2011] Writing fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2.gif
[Mon Oct 17 06:21:52 2011] ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.evt and ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Mon Oct 17 06:21:52 2011] Size of ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.evt.gz[events] = 29 counts
[Mon Oct 17 06:21:52 2011] Mean chipx,y = (304.76, 134.52)
[Mon Oct 17 06:21:52 2011] Mean tdetx,y = (4221.76, 1836.52)
[Mon Oct 17 06:21:52 2011] chipx,y range = (285.00-319.00, 115.00-147.00)
[Mon Oct 17 06:21:52 2011] Size of ../../acisf06263/products/events/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 108 counts
[Mon Oct 17 06:21:52 2011] ../../acisf06263/products/images/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.img and ../../acisf06263/products/images/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Mon Oct 17 06:21:52 2011] ../../acisf06263/products/spectra/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.pi and ../../acisf06263/products/spectra/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Mon Oct 17 06:21:52 2011] Not generating rmf since there are only 23 counts
[Mon Oct 17 06:21:55 2011] ../../acisf06263/products/lightcurves/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.lc and ../../acisf06263/products/lightcurves/fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Mon Oct 17 06:22:02 2011] 228.003
[Mon Oct 17 06:22:04 2011] Updating aperture counts using extracted products
[Mon Oct 17 06:22:04 2011] Error reading totcts from fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Oct 17 06:22:04 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 06:22:04 2011] Using photon index=1.80, rate=0.00141, arf fullrun_ccd7_acisf06263_pi14-548_pass1_cl_src2.arf
[Mon Oct 17 06:22:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 06:22:04 2011] Updating source flux to 1e-14
[Mon Oct 17 06:22:15 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting