[Mon Oct 17 02:26:43 2011] Detection parameters:
  Position = (580.9, 1032.0) = 19 59 32.96 40 43 40.5
  Extent = 0.7" x 0.7", rotation angle = 87 degrees
  Source counts = 170.8 +/- 14.2
  Background counts = 30.2
  Rate = 0.02 +/- 0.002

[Mon Oct 17 02:26:43 2011] Off-axis axis estimate = 1.56'
[Mon Oct 17 02:27:20 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 02:27:20 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Mon Oct 17 02:27:20 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.588
[Mon Oct 17 02:27:20 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 0.40"
[Mon Oct 17 02:27:21 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2.ximg exists
[Mon Oct 17 02:27:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 02:27:21 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Oct 17 02:27:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2.csv
[Mon Oct 17 02:27:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06250_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 02:27:21 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Oct 17 02:27:21 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Oct 17 02:27:21 2011] Fit fullrun_ccd1_acisf06250_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Oct 17 02:27:26 2011] Spatial fit model total counts = 215.983000, observed total counts = 216.000000
[Mon Oct 17 02:27:26 2011] Offset between fit and detection position for source 12 = 0.586373 pixels
[Mon Oct 17 02:27:26 2011] 220.996400 total counts/ 76.059400 bgd. counts: snr = 16.618921
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.586373 pixels
  Position = (581.4, 1032.3) = 19 59 32.96 40 43 40.3
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 144.9 +/- 14.9
  Background counts = 76.1
  Rate = 0.02 +/- 0.002
[Mon Oct 17 02:27:26 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 02:27:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 02:27:26 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 02:27:26 2011] Source does appear to be extended
[Mon Oct 17 02:27:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 02:27:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 17 02:27:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 17 02:27:39 2011] Initial guess for spatial extent in simple fitting = 0.77"
[Mon Oct 17 02:27:39 2011] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.943
[Mon Oct 17 02:27:39 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.77"
[Mon Oct 17 02:27:39 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2.ximg exists
[Mon Oct 17 02:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 02:27:39 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Oct 17 02:27:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2.csv
[Mon Oct 17 02:27:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06250_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 02:27:39 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Oct 17 02:27:39 2011] fullrun_ccd1_acisf06250_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Oct 17 02:27:39 2011] Fit fullrun_ccd1_acisf06250_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Oct 17 02:27:44 2011] Spatial fit model total counts = 215.227000, observed total counts = 216.000000
[Mon Oct 17 02:27:44 2011] Offset between fit and detection position for source 12 = 0.011509 pixels
[Mon Oct 17 02:27:44 2011] 220.240400 total counts/ 76.320400 bgd. counts: snr = 16.474067
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.011509 pixels
  Position = (581.4, 1032.3) = 19 59 32.96 40 43 40.3
  Extent = 0.8 (0.7-0.9)", rotation angle = 0
  Source counts = 143.9 +/- 14.8
  Background counts = 76.3
  Rate = 0.02 +/- 0.002
[Mon Oct 17 02:27:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 02:27:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 02:27:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 02:27:44 2011] Source does appear to be extended
[Mon Oct 17 02:27:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 02:28:26 2011] Not overwriting source region fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.reg
[Mon Oct 17 02:28:26 2011] Extracting stamp from image fullrun_ccd1_acisf06250_pi14-548_cl_sm2.00.img.gz, (547, 997) - (616, 1067)
[Mon Oct 17 02:28:26 2011] Writing fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12.gif
[Mon Oct 17 02:28:29 2011] ../../acisf06250/products/events/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.evt and ../../acisf06250/products/events/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon Oct 17 02:28:29 2011] Size of ../../acisf06250/products/events/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.evt.gz[events] = 186 counts
[Mon Oct 17 02:28:29 2011] Mean chipx,y = (374.44, 841.91)
[Mon Oct 17 02:28:29 2011] Mean tdetx,y = (4290.09, 4481.44)
[Mon Oct 17 02:28:29 2011] chipx,y range = (355.00-397.00, 822.00-863.00)
[Mon Oct 17 02:28:29 2011] Size of ../../acisf06250/products/events/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 328 counts
[Mon Oct 17 02:28:29 2011] ../../acisf06250/products/images/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.img and ../../acisf06250/products/images/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon Oct 17 02:28:29 2011] ../../acisf06250/products/spectra/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.pi and ../../acisf06250/products/spectra/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon Oct 17 02:28:31 2011] ../../acisf06250/products/lightcurves/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.lc and ../../acisf06250/products/lightcurves/fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon Oct 17 02:28:41 2011] Keeping rmf generated by specextract
[Mon Oct 17 02:28:41 2011] 203.003
[Mon Oct 17 02:28:58 2011] Updating aperture counts using extracted products
[Mon Oct 17 02:28:58 2011] Error reading totcts from fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12_src.pi.gz
[Mon Oct 17 02:28:58 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 17 02:28:58 2011] Using photon index=1.80, rate=0.0207, arf fullrun_ccd1_acisf06250_pi14-548_pass1_cl_src12.arf
[Mon Oct 17 02:28:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 17 02:28:58 2011] Updating source flux to 2.3e-13