[Wed Sep 28 10:51:14 2011] Detection parameters:
  Position = (563.1, 309.8) = 19 59 5.20 40 44 46.7
  Extent = 0.9" x 0.6", rotation angle = 20 degrees
  Source counts = 13.0 +/- 4.0
  Background counts = 3.0
  Rate = 0.0005 +/- 0.0002

[Wed Sep 28 10:51:15 2011] Off-axis axis estimate = 5.87'
[Wed Sep 28 10:52:15 2011] Using EEF radius (= 1.57 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 10:52:15 2011] Initial guess for spatial extent in simple fitting = 1.57"
[Wed Sep 28 10:52:15 2011] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.030
[Wed Sep 28 10:52:15 2011] Giving source the simple spatial ID 4 for pass 0, mean size = 1.57"
[Wed Sep 28 10:52:16 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4.ximg exists
[Wed Sep 28 10:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 10:52:16 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4_1.ximg exists
[Wed Sep 28 10:52:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4.csv
[Wed Sep 28 10:52:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06226_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 10:52:16 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Wed Sep 28 10:52:16 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Sep 28 10:52:16 2011] Fit fullrun_ccd3_acisf06226_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Sep 28 10:52:25 2011] Spatial fit model total counts = 20.957800, observed total counts = 22.000000
[Wed Sep 28 10:52:25 2011] Offset between fit and detection position for source 2 = 2.146795 pixels
[Wed Sep 28 10:52:25 2011] 20.637031 total counts/ 0.007831 bgd. counts: snr = 233.112890
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.146795 pixels
  Position = (563.2, 311.9) = 19 59 5.22 40 44 47.5
  Extent = 1.5 (0.9-1.8)", rotation angle = 0
  Source counts = 20.6 +/- 4.5
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Wed Sep 28 10:52:25 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 10:52:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 10:52:25 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 10:52:25 2011] Source does appear to be extended
[Wed Sep 28 10:52:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:52:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 10:52:47 2011] Initial guess for spatial extent in simple fitting = 1.48"
[Wed Sep 28 10:52:47 2011] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.991
[Wed Sep 28 10:52:47 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 1.48"
[Wed Sep 28 10:52:48 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 10:52:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 10:52:48 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 10:52:48 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 10:52:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06226_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 10:52:48 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 10:52:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Sep 28 10:52:48 2011] fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 10:52:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3.csv
[Wed Sep 28 10:52:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06226_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 10:52:55 2011] Spatial fit model total counts = 20.376000, observed total counts = 23.000000
[Wed Sep 28 10:52:55 2011] Offset between fit and detection position for source 2 = 1.816053 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.816053 pixels
  Position = (563.2, 310.1) = 19 59 5.21 40 44 46.6
  Extent = 1.3 (1.2-1.6)", rotation angle = 0
  Source counts = 21.6 +/- 4.6
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Wed Sep 28 10:52:55 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 10:52:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 10:52:55 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 10:52:55 2011] Source does appear to be extended
[Wed Sep 28 10:52:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:59:05 2011] Not overwriting source region fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 28 10:59:05 2011] Extracting stamp from image fullrun_ccd3_acisf06226_pi14-548_cl_sm2.00.img.gz, (502, 249) - (625, 371)
[Wed Sep 28 10:59:05 2011] Writing fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2.gif
[Wed Sep 28 10:59:25 2011] ../../acisf06226/products/events/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.evt and ../../acisf06226/products/events/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 28 10:59:25 2011] Size of ../../acisf06226/products/events/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.evt.gz[events] = 25 counts
[Wed Sep 28 10:59:25 2011] Mean chipx,y = (927.84, 411.64)
[Wed Sep 28 10:59:25 2011] Mean tdetx,y = (4720.36, 3988.84)
[Wed Sep 28 10:59:25 2011] chipx,y range = (915.00-946.00, 395.00-429.00)
[Wed Sep 28 10:59:25 2011] Size of ../../acisf06226/products/events/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 147 counts
[Wed Sep 28 10:59:25 2011] ../../acisf06226/products/images/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.img and ../../acisf06226/products/images/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 28 10:59:25 2011] Not generating rmf since there are only 21 counts
[Wed Sep 28 10:59:25 2011] arf not found, will run specextract
[Wed Sep 28 10:59:26 2011] ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_bkg.pi not found
[Wed Sep 28 10:59:26 2011] ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2.warf not found
[Wed Sep 28 10:59:26 2011] ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2.wrmf not found
[Wed Sep 28 10:59:26 2011] Removal of ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2.soff failed
[Wed Sep 28 10:59:26 2011] Failed to rename ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_grp.pi to ../../acisf06226/products/spectra/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.pi
[Wed Sep 28 10:59:33 2011] ../../acisf06226/products/lightcurves/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.lc and ../../acisf06226/products/lightcurves/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 28 11:00:14 2011] No arf file found
[Wed Sep 28 11:00:18 2011] Updating aperture counts using extracted products
[Wed Sep 28 11:00:18 2011] Error reading totcts from fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_src.pi
[Wed Sep 28 11:00:18 2011] No arf file for this source, not re-computing flux
[Wed Sep 28 11:00:23 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 28 11:00:24 2011] acisf06226/analysis//spectral/fullrun_ccd3_acisf06226_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete