[Wed Sep 28 10:51:12 2011] Detection parameters:
  Position = (111.7, 741.3) = 19 59 49.80 40 41 25.9
  Extent = 0.7" x 0.5", rotation angle = 39 degrees
  Source counts = 17.3 +/- 4.4
  Background counts = 1.7
  Rate = 0.0007 +/- 0.0002

[Wed Sep 28 10:51:13 2011] Off-axis axis estimate = 4.37'
[Wed Sep 28 10:52:13 2011] Using EEF radius (= 0.95 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 10:52:13 2011] Initial guess for spatial extent in simple fitting = 0.95"
[Wed Sep 28 10:52:13 2011] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.064
[Wed Sep 28 10:52:13 2011] Giving source the simple spatial ID 21 for pass 0, mean size = 0.95"
[Wed Sep 28 10:52:14 2011] fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21.ximg exists
[Wed Sep 28 10:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21.csv
[Wed Sep 28 10:52:14 2011] fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21_1.ximg exists
[Wed Sep 28 10:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21.csv
[Wed Sep 28 10:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06226_pi14-548_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 10:52:14 2011] fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21.ximg exists
[Wed Sep 28 10:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21.csv
[Wed Sep 28 10:52:14 2011] fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Sep 28 10:52:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21.csv
[Wed Sep 28 10:52:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06226_pi14-548_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 10:52:23 2011] Spatial fit model total counts = 17.890400, observed total counts = 20.000000
[Wed Sep 28 10:52:23 2011] Offset between fit and detection position for source 12 = 0.654211 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.654211 pixels
  Position = (112.1, 741.8) = 19 59 49.80 40 41 25.9
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 18.0 +/- 4.2
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Wed Sep 28 10:52:23 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 10:52:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 10:52:23 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 10:52:23 2011] Source does appear to be extended
[Wed Sep 28 10:52:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 10:52:23 2011] Deleting source due to low Poisson probability 0.8