[Mon Sep 26 04:47:35 2011] Detection parameters:
  Position = (885.9, 947.0) = 14 17 32.62 52 38 18.6
  Extent = 2.2" x 1.4", rotation angle = 107 degrees
  Source counts = 101.8 +/- 10.5
  Background counts = 9.2
  Rate = 0.003 +/- 0.0003

[Mon Sep 26 04:47:37 2011] Off-axis axis estimate = 7.45'
[Mon Sep 26 04:49:02 2011] Using EEF radius (= 2.46 ")to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:49:02 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:49:02 2011] Initial guess for spatial extent in simple fitting = 2.46"
[Mon Sep 26 04:49:02 2011] source mask rpix=5.0, npix_max = 120, mask sum = 121, frac = 1.002
[Mon Sep 26 04:49:02 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 2.46"
[Mon Sep 26 04:49:07 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2.ximg exists
[Mon Sep 26 04:49:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2.csv
[Mon Sep 26 04:49:08 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2_1.ximg exists
[Mon Sep 26 04:49:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2.csv
[Mon Sep 26 04:49:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06218_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:49:09 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Mon Sep 26 04:49:09 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Sep 26 04:49:09 2011] Fit fullrun_ccd1_acisf06218_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Sep 26 04:49:37 2011] Spatial fit model total counts = 113.000000, observed total counts = 113.000000
[Mon Sep 26 04:49:37 2011] Offset between fit and detection position for source 1 = 1.012270 pixels
[Mon Sep 26 04:49:37 2011] 113.522400 total counts/ 26.030700 bgd. counts: snr = 17.148413
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.012270 pixels
  Position = (886.9, 946.8) = 14 17 32.59 52 38 18.3
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 87.5 +/- 10.7
  Background counts = 26.0
  Rate = 0.002 +/- 0.0003
[Mon Sep 26 04:49:37 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:49:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:49:37 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:49:37 2011] Source does appear to be extended
[Mon Sep 26 04:49:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:50:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Sep 26 04:50:16 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Sep 26 04:50:16 2011] Initial guess for spatial extent in simple fitting = 1.81"
[Mon Sep 26 04:50:16 2011] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.913
[Mon Sep 26 04:50:16 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.81"
[Mon Sep 26 04:50:16 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2.ximg exists
[Mon Sep 26 04:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2.csv
[Mon Sep 26 04:50:17 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2_1.ximg exists
[Mon Sep 26 04:50:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2.csv
[Mon Sep 26 04:50:17 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf06218_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 04:50:18 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Mon Sep 26 04:50:19 2011] fullrun_ccd1_acisf06218_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Sep 26 04:50:19 2011] Fit fullrun_ccd1_acisf06218_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Sep 26 04:50:39 2011] Spatial fit model total counts = 100.996000, observed total counts = 101.000000
[Mon Sep 26 04:50:39 2011] Offset between fit and detection position for source 1 = 0.320160 pixels
[Mon Sep 26 04:50:39 2011] 100.510200 total counts/ 18.544900 bgd. counts: snr = 19.033462
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.320160 pixels
  Position = (886.9, 947.1) = 14 17 32.59 52 38 18.4
  Extent = 1.7 (1.4-2.2)", rotation angle = 0
  Source counts = 82.0 +/- 10.0
  Background counts = 18.5
  Rate = 0.002 +/- 0.0002
[Mon Sep 26 04:50:39 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 04:50:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 04:50:39 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 04:50:39 2011] Source does appear to be extended
[Mon Sep 26 04:50:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 04:52:40 2011] Not overwriting source region fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.reg
[Mon Sep 26 04:52:40 2011] Extracting stamp from image fullrun_ccd1_acisf06218_pi14-548_cl_sm2.00.img.gz, (808, 869) - (965, 1026)
[Mon Sep 26 04:52:40 2011] Writing fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1.gif
[Mon Sep 26 04:52:48 2011] ../../acisf06218/products/events/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.evt and ../../acisf06218/products/events/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Mon Sep 26 04:52:49 2011] Size of ../../acisf06218/products/events/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.evt.gz[events] = 105 counts
[Mon Sep 26 04:52:49 2011] Mean chipx,y = (348.19, 208.12)
[Mon Sep 26 04:52:49 2011] Mean tdetx,y = (4923.88, 4455.19)
[Mon Sep 26 04:52:49 2011] chipx,y range = (322.00-374.00, 184.00-232.00)
[Mon Sep 26 04:52:49 2011] Size of ../../acisf06218/products/events/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 63 counts
[Mon Sep 26 04:52:49 2011] ../../acisf06218/products/images/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.img and ../../acisf06218/products/images/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Mon Sep 26 04:52:49 2011] Not generating rmf since there are only 81 counts
[Mon Sep 26 04:52:49 2011] arf not found, will run specextract
[Mon Sep 26 04:52:51 2011] ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_bkg.pi not found
[Mon Sep 26 04:52:51 2011] ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1.warf not found
[Mon Sep 26 04:52:51 2011] ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1.wrmf not found
[Mon Sep 26 04:52:51 2011] Removal of ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1.soff failed
[Mon Sep 26 04:52:51 2011] Failed to rename ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_grp.pi to ../../acisf06218/products/spectra/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.pi
[Mon Sep 26 04:52:57 2011] ../../acisf06218/products/lightcurves/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.lc and ../../acisf06218/products/lightcurves/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Mon Sep 26 04:55:16 2011] No arf file found
[Mon Sep 26 05:05:03 2011] Updating aperture counts using extracted products
[Mon Sep 26 05:05:03 2011] Error reading totcts from fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_src.pi
[Mon Sep 26 05:05:03 2011] No arf file for this source, not re-computing flux
[Mon Sep 26 05:05:11 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Sep 26 05:05:12 2011] acisf06218/analysis//spectral/fullrun_ccd1_acisf06218_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete