[Sat Oct 22 23:52:54 2011] Detection parameters:
  Position = (976.4, 1119.9) = 14 20 20.74 52 58 42.0
  Extent = 0.7" x 0.5", rotation angle = 43 degrees
  Source counts = 13.9 +/- 3.9
  Background counts = 1.1
  Rate = 0.0003 +/- 8e-05

[Sat Oct 22 23:52:56 2011] Off-axis axis estimate = 3.33'
[Sat Oct 22 23:53:58 2011] Using EEF radius (= 0.65 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 23:53:58 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Oct 22 23:53:58 2011] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.901
[Sat Oct 22 23:53:58 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.65"
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct 22 23:53:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13.csv
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct 22 23:53:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13.csv
[Sat Oct 22 23:53:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:54:00 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct 22 23:54:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat Oct 22 23:54:00 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct 22 23:54:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13.csv
[Sat Oct 22 23:54:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:54:12 2011] Spatial fit model total counts = 15.206600, observed total counts = 17.000000
[Sat Oct 22 23:54:12 2011] Offset between fit and detection position for source 14 = 0.578373 pixels
[Sat Oct 22 23:54:12 2011] 15.822125 total counts/ 0.930725 bgd. counts: snr = 15.435647
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.578373 pixels
  Position = (976.7, 1120.4) = 14 20 20.75 52 58 42.1
  Extent = 0.8 (0.5-1.2)", rotation angle = 0
  Source counts = 14.9 +/- 4.0
  Background counts = 0.9
  Rate = 0.0003 +/- 8e-05
[Sat Oct 22 23:54:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 23:54:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 23:54:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 23:54:12 2011] Source does appear to be extended
[Sat Oct 22 23:54:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 23:54:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 23:54:41 2011] Initial guess for spatial extent in simple fitting = 0.78"
[Sat Oct 22 23:54:41 2011] source mask rpix=1.6, npix_max = 17, mask sum = 20, frac = 1.149
[Sat Oct 22 23:54:41 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.78"
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src12.ximg exists
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Oct 22 23:54:42 2011] Fit fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src12 appears to have run properly
[Sat Oct 22 23:54:43 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Oct 22 23:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12.csv
[Sat Oct 22 23:54:43 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Oct 22 23:54:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12.csv
[Sat Oct 22 23:54:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:54:54 2011] Spatial fit model total counts = 13.811600, observed total counts = 17.000000
[Sat Oct 22 23:54:54 2011] Offset between fit and detection position for source 14 = 0.026224 pixels
[Sat Oct 22 23:54:54 2011] 14.419704 total counts/ 0.291904 bgd. counts: snr = 26.148966
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.026224 pixels
  Position = (976.6, 1120.5) = 14 20 20.75 52 58 42.1
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 14.1 +/- 3.8
  Background counts = 0.3
  Rate = 0.0003 +/- 8e-05
[Sat Oct 22 23:54:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 23:54:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 23:54:54 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 23:54:54 2011] Source does appear to be extended
[Sat Oct 22 23:54:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 23:55:24 2011] Not overwriting source region fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.reg
[Sat Oct 22 23:55:24 2011] Extracting stamp from image fullrun_ccd0_acisf06215_pi14-548_cl_sm2.00.img.gz, (943, 1087) - (1010, 1154)
[Sat Oct 22 23:55:24 2011] Writing fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14.gif
[Sat Oct 22 23:57:03 2011] ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.evt and ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Oct 22 23:57:03 2011] Size of ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.evt.gz[events] = 15 counts
[Sat Oct 22 23:57:03 2011] Mean chipx,y = (712.33, 981.53)
[Sat Oct 22 23:57:03 2011] Mean tdetx,y = (4042.53, 4419.67)
[Sat Oct 22 23:57:03 2011] chipx,y range = (695.00-730.00, 963.00-1000.00)
[Sat Oct 22 23:57:03 2011] Size of ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 16 counts
[Sat Oct 22 23:57:03 2011] ../../acisf06215/products/images/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.img and ../../acisf06215/products/images/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Oct 22 23:57:03 2011] Not generating rmf since there are only 14 counts
[Sat Oct 22 23:57:03 2011] arf not found, will run specextract
[Sat Oct 22 23:57:05 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_bkg.pi not found
[Sat Oct 22 23:57:05 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14.warf not found
[Sat Oct 22 23:57:05 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14.wrmf not found
[Sat Oct 22 23:57:05 2011] Removal of ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14.soff failed
[Sat Oct 22 23:57:05 2011] Failed to rename ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_grp.pi to ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.pi
[Sat Oct 22 23:57:10 2011] ../../acisf06215/products/lightcurves/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.lc and ../../acisf06215/products/lightcurves/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Oct 22 23:58:36 2011] No arf file found
[Sun Oct 23 00:09:52 2011] Updating aperture counts using extracted products
[Sun Oct 23 00:09:52 2011] Error reading totcts from fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_src.pi
[Sun Oct 23 00:09:52 2011] No arf file for this source, not re-computing flux
[Sun Oct 23 00:09:58 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 00:09:59 2011] acisf06215/analysis//spectral/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete