[Sat Oct 22 23:52:53 2011] Detection parameters:
  Position = (465.2, 945.7) = 14 20 48.57 52 57 16.3
  Extent = 1.1" x 0.6", rotation angle = 94 degrees
  Source counts = 39.2 +/- 6.4
  Background counts = 1.8
  Rate = 0.0008 +/- 0.0001

[Sat Oct 22 23:52:56 2011] Off-axis axis estimate = 5.40'
[Sat Oct 22 23:53:58 2011] Using EEF radius (= 1.35 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 23:53:58 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 23:53:58 2011] Initial guess for spatial extent in simple fitting = 1.35"
[Sat Oct 22 23:53:58 2011] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.858
[Sat Oct 22 23:53:58 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.35"
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 22 23:53:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 22 23:53:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1.csv
[Sat Oct 22 23:53:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06215_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 22 23:53:59 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 22 23:53:59 2011] Fit fullrun_ccd0_acisf06215_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 22 23:54:12 2011] Spatial fit model total counts = 48.349100, observed total counts = 48.000000
[Sat Oct 22 23:54:12 2011] Offset between fit and detection position for source 1 = 0.953999 pixels
[Sat Oct 22 23:54:12 2011] 47.625480 total counts/ 9.919180 bgd. counts: snr = 11.972257
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.953999 pixels
  Position = (465.7, 946.5) = 14 20 48.57 52 57 16.4
  Extent = 1.1 (0.9-1.5)", rotation angle = 0
  Source counts = 37.7 +/- 6.9
  Background counts = 9.9
  Rate = 0.0008 +/- 0.0001
[Sat Oct 22 23:54:12 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 23:54:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 23:54:12 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 23:54:12 2011] Source does appear to be extended
[Sat Oct 22 23:54:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 23:54:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 23:54:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 22 23:54:41 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Sat Oct 22 23:54:41 2011] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.960
[Sat Oct 22 23:54:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.13"
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 22 23:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 22 23:54:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1.csv
[Sat Oct 22 23:54:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06215_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 22 23:54:42 2011] fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 22 23:54:42 2011] Fit fullrun_ccd0_acisf06215_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 22 23:54:54 2011] Spatial fit model total counts = 41.575400, observed total counts = 45.000000
[Sat Oct 22 23:54:54 2011] Offset between fit and detection position for source 1 = 0.497766 pixels
[Sat Oct 22 23:54:54 2011] 40.380802 total counts/ 0.052002 bgd. counts: snr = 176.849746
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.497766 pixels
  Position = (465.7, 947.0) = 14 20 48.58 52 57 16.7
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 40.3 +/- 6.4
  Background counts = 0.1
  Rate = 0.0008 +/- 0.0001
[Sat Oct 22 23:54:54 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 23:54:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 23:54:54 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 23:54:54 2011] Source does appear to be extended
[Sat Oct 22 23:54:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 23:55:24 2011] Not overwriting source region fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 22 23:55:24 2011] Extracting stamp from image fullrun_ccd0_acisf06215_pi14-548_cl_sm2.00.img.gz, (412, 893) - (519, 1001)
[Sat Oct 22 23:55:24 2011] Writing fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1.gif
[Sat Oct 22 23:55:26 2011] ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.evt and ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 22 23:55:26 2011] Size of ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.evt.gz[events] = 44 counts
[Sat Oct 22 23:55:26 2011] Mean chipx,y = (850.30, 456.11)
[Sat Oct 22 23:55:26 2011] Mean tdetx,y = (3517.11, 4281.70)
[Sat Oct 22 23:55:26 2011] chipx,y range = (829.00-870.00, 438.00-479.00)
[Sat Oct 22 23:55:26 2011] Size of ../../acisf06215/products/events/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 31 counts
[Sat Oct 22 23:55:26 2011] ../../acisf06215/products/images/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.img and ../../acisf06215/products/images/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 22 23:55:26 2011] Not generating rmf since there are only 40 counts
[Sat Oct 22 23:55:26 2011] arf not found, will run specextract
[Sat Oct 22 23:55:28 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_bkg.pi not found
[Sat Oct 22 23:55:28 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1.warf not found
[Sat Oct 22 23:55:28 2011] ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1.wrmf not found
[Sat Oct 22 23:55:28 2011] Removal of ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1.soff failed
[Sat Oct 22 23:55:28 2011] Failed to rename ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_grp.pi to ../../acisf06215/products/spectra/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.pi
[Sat Oct 22 23:55:34 2011] ../../acisf06215/products/lightcurves/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.lc and ../../acisf06215/products/lightcurves/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 22 23:58:36 2011] No arf file found
[Sun Oct 23 00:09:52 2011] Updating aperture counts using extracted products
[Sun Oct 23 00:09:52 2011] Error reading totcts from fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_src.pi
[Sun Oct 23 00:09:52 2011] No arf file for this source, not re-computing flux
[Sun Oct 23 00:09:58 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 23 00:09:59 2011] acisf06215/analysis//spectral/fullrun_ccd0_acisf06215_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete