[Wed Sep 28 00:42:08 2011] Detection parameters:
  Position = (656.2, 819.2) = 14 21 22.55 53 19 21.9
  Extent = 0.9" x 0.5", rotation angle = 149 degrees
  Source counts = 10.1 +/- 3.5
  Background counts = 1.9
  Rate = 0.0002 +/- 7e-05

[Wed Sep 28 00:42:08 2011] Off-axis axis estimate = 6.34'
[Wed Sep 28 00:43:03 2011] Using EEF radius (= 1.81 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:03 2011] Initial guess for spatial extent in simple fitting = 1.81"
[Wed Sep 28 00:43:03 2011] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.920
[Wed Sep 28 00:43:03 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 1.81"
[Wed Sep 28 00:43:04 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16.ximg exists
[Wed Sep 28 00:43:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16.csv
[Wed Sep 28 00:43:04 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16_1.ximg exists
[Wed Sep 28 00:43:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16.csv
[Wed Sep 28 00:43:04 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06213_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:04 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Wed Sep 28 00:43:04 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Sep 28 00:43:04 2011] Fit fullrun_ccd3_acisf06213_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Sep 28 00:43:15 2011] Spatial fit model total counts = 10.180500, observed total counts = 13.000000
[Wed Sep 28 00:43:15 2011] Offset between fit and detection position for source 30 = 0.524988 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.524988 pixels
  Position = (656.7, 819.6) = 14 21 22.55 53 19 21.8
  Extent = 1.2" x 0.8", rotation angle = 192
  Source counts = 10.4 +/- 3.2
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Wed Sep 28 00:43:15 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:15 2011] Assessing source extent using major
[Wed Sep 28 00:43:15 2011] Source does appear to be extended
[Wed Sep 28 00:43:15 2011] Computing asymmetry using major and minor axis, asym = 1.58
[Wed Sep 28 00:43:15 2011] Source is asymmetric
[Wed Sep 28 00:43:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:39 2011] Initial guess for spatial extent in simple fitting = 1.00"
[Wed Sep 28 00:43:39 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.976
[Wed Sep 28 00:43:39 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 1.00"
[Wed Sep 28 00:43:40 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16.ximg exists
[Wed Sep 28 00:43:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16.csv
[Wed Sep 28 00:43:40 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16_1.ximg exists
[Wed Sep 28 00:43:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16.csv
[Wed Sep 28 00:43:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf06213_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:40 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Wed Sep 28 00:43:40 2011] fullrun_ccd3_acisf06213_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Wed Sep 28 00:43:40 2011] Fit fullrun_ccd3_acisf06213_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Wed Sep 28 00:43:52 2011] Spatial fit model total counts = 11.375300, observed total counts = 12.000000
[Wed Sep 28 00:43:52 2011] Offset between fit and detection position for source 30 = 0.922686 pixels
[Wed Sep 28 00:43:52 2011] 12.149490 total counts/ 5.524660 bgd. counts: snr = 2.818525
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.922686 pixels
  Position = (656.7, 818.7) = 14 21 22.55 53 19 21.4
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 6.6 +/- 3.5
  Background counts = 5.5
  Rate = 0.0001 +/- 7e-05
[Wed Sep 28 00:43:52 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:52 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:43:52 2011] Source does appear to be extended
[Wed Sep 28 00:43:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:47:55 2011] Not overwriting source region fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.reg
[Wed Sep 28 00:47:55 2011] Extracting stamp from image fullrun_ccd3_acisf06213_pi14-548_cl_sm2.00.img.gz, (644, 806) - (669, 831)
[Wed Sep 28 00:47:55 2011] Writing fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30.gif
[Wed Sep 28 00:48:45 2011] ../../acisf06213/products/events/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.evt and ../../acisf06213/products/events/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Wed Sep 28 00:48:45 2011] Size of ../../acisf06213/products/events/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.evt.gz[events] = 7 counts
[Wed Sep 28 00:48:45 2011] Mean chipx,y = (381.43, 486.57)
[Wed Sep 28 00:48:45 2011] Mean tdetx,y = (4645.43, 3442.43)
[Wed Sep 28 00:48:45 2011] chipx,y range = (367.00-397.00, 478.00-503.00)
[Wed Sep 28 00:48:45 2011] Size of ../../acisf06213/products/events/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 5 counts
[Wed Sep 28 00:48:45 2011] ../../acisf06213/products/images/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.img and ../../acisf06213/products/images/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Wed Sep 28 00:48:45 2011] ../../acisf06213/products/spectra/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.pi and ../../acisf06213/products/spectra/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Wed Sep 28 00:48:45 2011] Not generating rmf since there are only 6 counts
[Wed Sep 28 00:48:49 2011] ../../acisf06213/products/lightcurves/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.lc and ../../acisf06213/products/lightcurves/fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Wed Sep 28 00:49:24 2011] 175.696
[Wed Sep 28 00:49:33 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:49:33 2011] Error reading totcts from fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30_src.pi.gz
[Wed Sep 28 00:49:33 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:49:33 2011] Using photon index=1.80, rate=0.000139, arf fullrun_ccd3_acisf06213_pi14-548_pass1_cl_src30.arf
[Wed Sep 28 00:49:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:49:33 2011] Updating source flux to 1.8e-15
[Wed Sep 28 00:49:52 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting