[Wed Sep 28 00:41:59 2011] Detection parameters:
  Position = (258.7, 578.1) = 14 22 9.13 53 6 1.6
  Extent = 0.5" x 0.5", rotation angle = 73 degrees
  Source counts = 149.2 +/- 13.1
  Background counts = 21.8
  Rate = 0.003 +/- 0.0003

[Wed Sep 28 00:42:00 2011] Off-axis axis estimate = 8.95'
[Wed Sep 28 00:43:00 2011] Using EEF radius (= 3.54 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 00:43:00 2011] Initial guess for spatial extent in simple fitting = 3.54"
[Wed Sep 28 00:43:00 2011] source mask rpix=7.2, npix_max = 237, mask sum = 217, frac = 0.915
[Wed Sep 28 00:43:00 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 3.54"
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 28 00:43:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 28 00:43:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3.csv
[Wed Sep 28 00:43:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 28 00:43:00 2011] Fit fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 28 00:43:09 2011] Spatial fit model total counts = 299.488000, observed total counts = 309.000000
[Wed Sep 28 00:43:09 2011] Offset between fit and detection position for source 3 = 1.972675 pixels
[Wed Sep 28 00:43:09 2011] 298.176500 total counts/ 38.300500 bgd. counts: snr = 41.991748
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.972675 pixels
  Position = (258.0, 576.3) = 14 22 9.19 53 6 0.4
  Extent = 3.3 (2.9-3.7)", rotation angle = 0
  Source counts = 259.9 +/- 17.3
  Background counts = 38.3
  Rate = 0.005 +/- 0.0004
[Wed Sep 28 00:43:09 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:09 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:43:09 2011] Source does appear to be extended
[Wed Sep 28 00:43:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:43:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:36 2011] Initial guess for spatial extent in simple fitting = 3.27"
[Wed Sep 28 00:43:36 2011] source mask rpix=6.6, npix_max = 204, mask sum = 175, frac = 0.856
[Wed Sep 28 00:43:36 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 3.27"
[Wed Sep 28 00:43:36 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 28 00:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 00:43:36 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 28 00:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3.csv
[Wed Sep 28 00:43:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:37 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 28 00:43:37 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 28 00:43:37 2011] Fit fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 28 00:43:46 2011] Spatial fit model total counts = 297.497000, observed total counts = 307.000000
[Wed Sep 28 00:43:46 2011] Offset between fit and detection position for source 3 = 0.061349 pixels
[Wed Sep 28 00:43:46 2011] 296.238600 total counts/ 46.915600 bgd. counts: snr = 36.400195
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.061349 pixels
  Position = (258.1, 576.3) = 14 22 9.19 53 6 0.4
  Extent = 3.2 (2.7-3.6)", rotation angle = 0
  Source counts = 249.3 +/- 17.2
  Background counts = 46.9
  Rate = 0.005 +/- 0.0004
[Wed Sep 28 00:43:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:43:46 2011] Source does appear to be extended
[Wed Sep 28 00:43:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:44:12 2011] Not overwriting source region fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 28 00:44:12 2011] Extracting stamp from image fullrun_ccd0_acisf06213_pi14-548_cl_sm2.00.img.gz, (113, 431) - (403, 721)
[Wed Sep 28 00:44:13 2011] Writing fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3.gif
[Wed Sep 28 00:44:24 2011] ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.evt and ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 28 00:44:24 2011] Size of ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.evt.gz[events] = 312 counts
[Wed Sep 28 00:44:24 2011] Mean chipx,y = (609.07, 87.35)
[Wed Sep 28 00:44:24 2011] Mean tdetx,y = (3148.35, 4522.93)
[Wed Sep 28 00:44:24 2011] chipx,y range = (574.00-640.00, 57.00-120.00)
[Wed Sep 28 00:44:24 2011] Size of ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 249 counts
[Wed Sep 28 00:44:24 2011] ../../acisf06213/products/images/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.img and ../../acisf06213/products/images/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 28 00:44:24 2011] ../../acisf06213/products/spectra/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.pi and ../../acisf06213/products/spectra/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 28 00:44:29 2011] ../../acisf06213/products/lightcurves/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.lc and ../../acisf06213/products/lightcurves/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 28 00:45:18 2011] Keeping rmf generated by specextract
[Wed Sep 28 00:45:18 2011] 168.486
[Wed Sep 28 00:49:31 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:49:31 2011] Error reading totcts from fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 28 00:49:31 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:49:31 2011] Using photon index=1.80, rate=0.00525, arf fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src3.arf
[Wed Sep 28 00:49:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:49:31 2011] Updating source flux to 7.3e-14