[Wed Sep 28 00:41:59 2011] Detection parameters:
  Position = (405.7, 652.1) = 14 22 1.10 53 6 38.1
  Extent = 0.7" x 0.5", rotation angle = 57 degrees
  Source counts = 140.4 +/- 12.3
  Background counts = 11.6
  Rate = 0.003 +/- 0.0003

[Wed Sep 28 00:42:00 2011] Off-axis axis estimate = 7.78'
[Wed Sep 28 00:43:00 2011] Using EEF radius (= 2.68 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 00:43:00 2011] Initial guess for spatial extent in simple fitting = 2.68"
[Wed Sep 28 00:43:00 2011] source mask rpix=5.4, npix_max = 141, mask sum = 130, frac = 0.921
[Wed Sep 28 00:43:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.68"
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 28 00:43:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 28 00:43:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1.csv
[Wed Sep 28 00:43:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06213_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 28 00:43:00 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 28 00:43:00 2011] Fit fullrun_ccd0_acisf06213_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 28 00:43:09 2011] Spatial fit model total counts = 256.048000, observed total counts = 252.000000
[Wed Sep 28 00:43:09 2011] Offset between fit and detection position for source 1 = 2.637264 pixels
[Wed Sep 28 00:43:09 2011] 255.926100 total counts/ 28.231100 bgd. counts: snr = 42.853825
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.637264 pixels
  Position = (406.0, 649.5) = 14 22 1.12 53 6 36.5
  Extent = 2.5 (2.2-2.7)", rotation angle = 0
  Source counts = 227.7 +/- 16.0
  Background counts = 28.2
  Rate = 0.005 +/- 0.0003
[Wed Sep 28 00:43:09 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:09 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:43:09 2011] Source does appear to be extended
[Wed Sep 28 00:43:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:43:36 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 00:43:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 28 00:43:36 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Wed Sep 28 00:43:36 2011] source mask rpix=5.0, npix_max = 123, mask sum = 114, frac = 0.926
[Wed Sep 28 00:43:36 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.48"
[Wed Sep 28 00:43:36 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 28 00:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 00:43:36 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 28 00:43:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1.csv
[Wed Sep 28 00:43:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf06213_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 00:43:36 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 28 00:43:37 2011] fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 28 00:43:37 2011] Fit fullrun_ccd0_acisf06213_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 28 00:43:46 2011] Spatial fit model total counts = 253.561000, observed total counts = 248.000000
[Wed Sep 28 00:43:46 2011] Offset between fit and detection position for source 1 = 0.019502 pixels
[Wed Sep 28 00:43:46 2011] 253.478400 total counts/ 26.213400 bgd. counts: snr = 44.388542
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019502 pixels
  Position = (406.0, 649.4) = 14 22 1.12 53 6 36.5
  Extent = 2.4 (2.2-2.7)", rotation angle = 0
  Source counts = 227.3 +/- 15.9
  Background counts = 26.2
  Rate = 0.005 +/- 0.0003
[Wed Sep 28 00:43:46 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 00:43:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 00:43:46 2011] Assessing source extent using major axis lower bound
[Wed Sep 28 00:43:46 2011] Source does appear to be extended
[Wed Sep 28 00:43:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 28 00:44:12 2011] Not overwriting source region fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 00:44:12 2011] Extracting stamp from image fullrun_ccd0_acisf06213_pi14-548_cl_sm2.00.img.gz, (294, 538) - (518, 761)
[Wed Sep 28 00:44:12 2011] Writing fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 00:44:17 2011] ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.evt and ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 00:44:17 2011] Size of ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.evt.gz[events] = 242 counts
[Wed Sep 28 00:44:17 2011] Mean chipx,y = (608.55, 253.61)
[Wed Sep 28 00:44:17 2011] Mean tdetx,y = (3314.61, 4523.45)
[Wed Sep 28 00:44:17 2011] chipx,y range = (583.00-640.00, 226.00-288.00)
[Wed Sep 28 00:44:17 2011] Size of ../../acisf06213/products/events/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 143 counts
[Wed Sep 28 00:44:17 2011] ../../acisf06213/products/images/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.img and ../../acisf06213/products/images/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 00:44:17 2011] ../../acisf06213/products/spectra/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.pi and ../../acisf06213/products/spectra/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 00:44:21 2011] ../../acisf06213/products/lightcurves/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.lc and ../../acisf06213/products/lightcurves/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 00:45:18 2011] Keeping rmf generated by specextract
[Wed Sep 28 00:45:18 2011] 175.445
[Wed Sep 28 00:49:31 2011] Updating aperture counts using extracted products
[Wed Sep 28 00:49:31 2011] Error reading totcts from fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 00:49:31 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:49:31 2011] Using photon index=1.80, rate=0.00478, arf fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:49:31 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:49:31 2011] Updating source flux to 6.4e-14
[Wed Sep 28 00:49:42 2011] Reading fit data from acisf06213/analysis//spectral/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 28 00:49:42 2011] Spectral fit parameter nH value = 5.23254e+21
[Wed Sep 28 00:49:42 2011] Spectral fit parameter PhoIndex value = 2.41935
[Wed Sep 28 00:49:42 2011] Failed to get F(0.3-8.0) from acisf06213/analysis//spectral/fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 28 00:49:42 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 00:49:42 2011] Using Nh = 5.2e+21, photon index=2.42, rate=0.00478, arf fullrun_ccd0_acisf06213_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 00:49:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 00:49:42 2011] Updating source flux to 5.2e-14